Searched for: +
(41 - 60 of 151)

Pages

document
Fu, Y. (author), Fang, H. (author), Monaco, F. (author), Cloetens, P. (author), Tichelaar, F.D. (author), van Meel, J.G. (author), Brück, E.H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)
Constant stress creep experiments at 550 °C were performed on a high-purity Fe-3Au-4W (wt.%) ternary alloy with about 1 at.% supersaturation for Au and W in order to study self healing of grain-boundary cavities by both Au-rich and W-rich precipitates. Using synchrotron X-ray nano-tomography, the development of the creep cavities and the...
journal article 2022
document
Zhao, Jian (author), Fang, Shangbiao (author), Liu, G. (author), Qi, Weixiao (author), Bai, Yaohui (author), Liu, Huijuan (author), Qu, Jiuhui (author)
Biodegradation plays an important role in the removal of organic micropollutants (OMPs) during riverbank filtration (RBF) for drinking water production. The ability of ammonia-oxidizing microorganisms (AOM) to remove OMPs has attracted increasing attention. However, the distribution of AOM in RBF and its role in the degradation of OMPs...
journal article 2022
document
Fang, Li (author), Jin, Jianbing (author), Segers, Arjo (author), Lin, H.X. (author), Pang, Mijie (author), Xiao, Cong (author), Deng, T. (author), Liao, Hong (author)
With the explosive growth of atmospheric data, machine learning models have achieved great success in air pollution forecasting because of their higher computational efficiency than the traditional chemical transport models. However, in previous studies, new prediction algorithms have only been tested at stations or in a small region; a large...
journal article 2022
document
Fang, G. (author), Tian, Yingjun (author), Weightman, Andrew (author), Wang, C.C. (author)
Soft robots can safely interact with environments because of their mechanical compliance. Self-collision is also employed in the modern design of soft robots to enhance their performance during different tasks. However, developing an efficient and reliable simulator that can handle the collision response well, is still a challenging task in...
conference paper 2022
document
Sun, Zhu (author), Yang, J. (author), Feng, Kaidong (author), Fang, Hui (author), Qu, Xinghua (author), Ong, Yew Soon (author)
Product bundling is a commonly-used marketing strategy in both offline retailers and online e-commerce systems. Current research on bundle recommendation is limited by: (1) noisy datasets, where bundles are defined by heuristics, e.g., products co-purchased in the same session; and (2) specific tasks, holding unrealistic assumptions, e.g.,...
conference paper 2022
document
Hou, Jue (author), Liu, Zhou (author), Wang, Shaorong (author), Chen, Zhe (author), Xie, Wei (author), Fang, Cheng (author), Wei, Xinchi (author), Popov, M. (author)
Supplementary control (SC) technology is widely leveraged by power supply companies in active distribution networks (ADNs) to improve their stability and dynamic characteristics. Yet, the existed SCs are generally implemented from inside the converter controllers of distributed generators (DGs) or active loads, so there is a need to redesign...
journal article 2022
document
Mohammadi, V. (author), Nihtianova, S. (author), Fang, C. (author)
<br/>
journal article 2021
document
Fang, Juan (author), Haldimann, Michael (author), Marchal Crespo, L. (author), Hunt, Kenneth J. (author)
In a parallel development to traditional rigid rehabilitation robotic systems, cable-driven systems are becoming popular. The robowalk expander product uses passive elastic bands in the training of the lower limbs. However, a well-controlled assistance or resistance is desirable for effective walking relearning and muscle training. To achieve...
journal article 2021
document
Peternel, L. (author), Tofte Schon, Daniel (author), Fang, Cheng (author)
Ergonomics of human workers is one of the key elements in design and evaluation of production processes. Human ergonomics have a major impact on productivity as well as chronic health risks incurred by inappropriate working postures and conditions. In this paper we propose a novel method for estimating and communicating the ergonomic work...
journal article 2021
document
Zhang, Hongzhi (author), Yuan, Huaqiang (author), Ge, Zhi (author), Wu, Jiajie (author), Fang, Cheng (author), Schlangen, E. (author), Šavija, B. (author)
Clay brick is one of the major components of demolition waste, which is generally landfilled. Effective and new uses of recycled clay brick may provide sustainability benefits in terms of landfill reduction. Therefore, this research aims at applying Recycled fine clay brick aggregates (RFCBA) with sizes from 0.075 mm–4.75 mm to prepare Self...
journal article 2021
document
Sberna, P.M. (author), Fang, Piet Xiaowen (author), Fang, C. (author), Nihtianova, S. (author)
The discovery of the extremely shallow amorphous boron-crystalline silicon heterojunction occurred during the development of highly sensitive, hard and robust detectors for low-penetration-depth ionizing radiation, such as ultraviolet photons and low-energy electrons (below 1 keV). For many years it was believed that the junction created by...
review 2021
document
Xu, Yuxin (author), Fang, P. (author), Bai, Yong (author)
Metallic strip flexible pipes (MSFP), a relatively new style of unbonded flexible pipes, are considered as an attractive alternative to traditional submarine pipes. During its reeling operation, it will inevitably confront various complicated loads, which may affect the integrity and safety of MSFP's utilization. In this paper, the tension...
journal article 2021
document
Peng, Liqi (author), Wang, Feifei (author), Zhang, Di (author), Fang, Chao (author), van der Hoek, J.P. (author), Chu, Wenhai (author)
The high chlorine dosages in wastewater treatment plants during the COVID-19 pandemic may result in increased formation of disinfection by-products (DBPs), posing great threat to the aquatic ecosystem of the receiving water body and the public health in the downstream area. However, limited information is available on the effect of biological...
journal article 2021
document
Tang, Z. (author), Fang, Yun (author), Yu, Xiao Peng (author), Tan, Nick Nianxiong (author), Shi, Zheng (author), Harpe, Pieter (author)
This work presents an energy-efficient diode-based CMOS temperature sensor. It is based on the capacitively biased diode (CBD) working principle and can operate with a 1-V supply voltage. Instead of using a separate CBD front-end and ADC, a new architecture is proposed in which the CBD front-end is directly embedded into the 1st stage of a 1...
journal article 2021
document
Ali, Liaqat (author), Makhdoom, Nageena (author), Gao, Yifan (author), Fang, P. (author), Khan, Sikandar (author), Bai, Yong (author)
A numerical model in slice configuration was applied to the Central Andaman Sea in order to derive metocean operational and design criteria associated to internal solitary waves which are large amplitude interfacial waves. For that purpose, a 10 year hindcast was generated. The model was driven by tides at the open boundary and included...
journal article 2021
document
Fang, Wei (author), Zhang, Xuedong (author), Spanjers, H. (author), Zhang, Tao (author)
Persulfates ((peroxymonosulfate (PMS) and peroxydisulfate (PDS)) can disintegrate waste activated sludge (WAS), but their influence on volatile fatty acid (VFA) production during anaerobic fermentation is largely unclear. Particularly, it is unknown whether persulfates can improve fermentation without any preactivation. This study...
journal article 2021
document
Bai, Shengwen (author), Fang, Gang (author), Jiang, Bin (author), Zhou, J. (author)
This research was aimed to reveal atomic diffusion across the bonding interface through the extrusion-welding experiments of dissimilar materials, namely pure magnesium and Mg–Al–Zn–RE alloy. A special tooling setup used to simulate weld seam formation during extrusion through a porthole die was designed for this model study. To deform the...
journal article 2021
document
Fang, H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)
A computational 3D model that accounts for both nucleation and interface migration is a very useful tool to monitor and grasp the complexity of microstructure formation in low-alloyed steels. In the present study we have developed a 3D mixed-mode multigrain model for the austenite-ferrite and the austenite-ferrite-austenite formation capable...
journal article 2021
document
Fang, P. (author), Jiang, X. (author), Hopman, J.J. (author), Bai, Yong (author)
Submarine power cables are considered lifelines in wind farm engineering, playing a key role in transporting electric current produced by wind turbines or wave converter. Cables inevitably confront combined loadings in deep-sea areas, affecting the integrity and safety during their installation and application. In this paper, the mechanical...
journal article 2021
document
Zhang, Shuoshuo (author), Zhang, Yuquan (author), Fu, Yanan (author), Zhu, Z. (author), Man, Zhongsheng (author), Bu, Jing (author), Fang, Hui (author), Min, Changjun (author), Yuan, Xiaocong (author)
Single molecule detection and analysis play important roles in many current biomedical researches. The deep-nanoscale hotspots, being excited and confined in a plasmonic nanocavity, make it possible to simultaneously enhance the nonlinear light-matter interactions and molecular Raman scattering for label-free detections. Here, we...
journal article 2021
Searched for: +
(41 - 60 of 151)

Pages