- document
-
Dong, J. (author), Li, Y. (author), Lin, P. (author), Leeflang, M.A. (author), van Asperen, S. (author), Yu, K. (author), Tümer, N. (author), Norder, B. (author), Zadpoor, A.A. (author), Zhou, J. (author)Biodegradable porous magnesium (Mg) scaffolds are promising for application in the regeneration of critical-sized bone defects. Although additive manufacturing (AM) carries the promise of offering unique opportunities to fabricate porous Mg scaffolds, current attempts to apply the AM approach to fabricating Mg scaffolds have encountered some...journal article 2020
- document
-
Kies, Fabian (author), Ikeda, Yuji (author), Ewald, Simon (author), Schleifenbaum, Johannes H. (author), Hallstedt, Bengt (author), Körmann, F.H.W. (author), Haase, Christian (author)Density functional theory (DFT) calculations were performed on Al<sub>x</sub>C<sub>y</sub>CoFeMnNi multi-principal element alloys (MPEAs) to understand the influence of Al and C on the stacking-fault energy (SFE). C addition to CoFeMnNi resulted in increased SFE, while it decreased in Al-alloyed CoFeMnNi. For experimental verification, Al<sub...journal article 2020
- document
-
Polozov, Igor (author), Kantyukov, Artem (author), Goncharov, Ivan (author), Razumov, Nikolay (author), Silin, Alexey (author), Popovich, V. (author), Zhu, Jia-Ning (author), Popovich, Anatoly (author)In this paper, laser powder-bed fusion (L-PBF) additive manufacturing (AM) with a high-temperature inductive platform preheating was used to fabricate intermetallic TiAl-alloy samples. The gas atomized (GA) and mechanically alloyed plasma spheroidized (MAPS) powders of the Ti-48Al-2Cr-2Nb (at. %) alloy were used as the feedstock material. The...journal article 2020
- document
-
Sauerwein, M. (author), Zlopasa, J. (author), Doubrovski, E.L. (author), Bakker, C.A. (author), Balkenende, R. (author)The circular economy requires high-value material recovery to enable multiple product lifecycles. This implies the need for additive manufacturing to focus on the development and use of low-impact materials that, after product use, can be reconstituted to their original properties in terms of printability and functionality. We therefore...journal article 2020
- document
-
Laghi, V. (author), Palermo, Michele (author), Gasparini, Giada (author), Veljkovic, M. (author), Trombetti, Tomaso (author)Early investigations suggest that the use of Additive Manufacturing (AM) technologies for construction has the potential to decrease labor costs, reduce material waste, and create customized complex geometries that are difficult to be manufactured using conventional construction techniques. Nevertheless, the full exploitation of AM...journal article 2020
- document
-
Laan, Rianne (author), Nout, Remi A. (author), Dankelman, J. (author), van de Berg, N.J. (author)Background:<br/> Brachytherapy involves placement of radioactive sources inside or near the tumour. For gynaecological cancer, recent developments, including 3D imaging and image-guided adaptive brachytherapy, have improved treatment quality and outcomes. However, for large or complex tumours, target coverage and local control with commercially...journal article 2019
- document
-
Li, Y. (author), Lietaert, K. (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...journal article 2019
- document
-
Langelaar, Matthijs (author)Purpose: The purpose of this paper is to communicate a method to perform simultaneous topology optimization of component and support structures considering typical metal additive manufacturing (AM) restrictions and post-print machining requirements. Design/methodology/approach: An integrated topology optimization is proposed using two density...journal article 2019
- document
-
Wang, W. (author), Munro, D.P. (author), Wang, C.C. (author), van Keulen, A. (author), Wu, J. (author)The design of optimal structures and the planning of (additive manufacturing) fabrication sequences have been considered typically as two separate tasks that are performed consecutively. In the light of recent advances in robot-assisted (wire-arc) additive manufacturing which enable addition of material along curved surfaces, we present a...journal article 2019
- document
-
Chaves Figueiredo, S. (author), Romero Rodriguez, C. (author), Ahmed, Zeeshan Y. (author), Bos, D. H. (author), Xu, Y. (author), Salet, Theo M. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author), Bos, Freek P. (author)New additive manufacturing methods for cementitious materials hold a high potential to increase automation in the construction industry. However, these methods require new materials to be developed that meet performance requirements related to specific characteristics of the manufacturing process. The appropriate characterization methods of...journal article 2019
- document
-
Chaves Figueiredo, S. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author)Significant attention has been given to the development of new materials and techniques to be employed in the construction market. One of the techniques which has drawn noticeable attention is the additive manufacturing process (a.k.a. 3-dimensional printing (3D printing)). One of the approaches of this construction technique is the extrusion of...journal article 2019
- document
-
Munro, D.P. (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)We study linearity assumptions in the transient macroscale mechanical aspect of additive manufacturing (AM) process simulation. Linearity assumptions are often resorted to in combination with calibrated inelastic deformation components to arrive at computationally tractable yet reasonably accurate AM process models. We point out that...journal article 2019
- document
-
Rans, C.D. (author), Michielssen, J. (author), Walker, M.S. (author), Wang, W. (author), Hoen-Velterop, Ludmila ’t (author)A challenge in developing an in-depth understanding of the crack growth resistance of Additively Manufactured materials is the fact that their mechanical properties have been shown to be both process and part-geometry dependent. Up to now, no studies have investigated the influence of off-axis (beyond the three orthogonal build orientations)...journal article 2018
- document
-
Bekker, A.C.M. (author), Verlinden, J.C. (author)Wire and Arc Additive Manufacturing (WAAM) is a metal 3D printing technique based on robotic welding. This technique yields potential in decreasing material consumption due to its high material efficiency and freedom of shape. Empirical measurements of WAAM, using a deposition rate of 1 kg/h, were performed on site of MX3D. The measured power...journal article 2018
- document
-
Li, Y. (author), Jahr, H. (author), Lietaert, K. (author), Pavanram, P. (author), Yilmaz, A. (author), Fockaert, L.I. (author), Leeflang, M.A. (author), Pouran, B. (author), Gonzalez Garcia, Y. (author), Weinans, Harrie (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)Additively manufactured (AM) topologically ordered porous metallic biomaterials with the proper biodegradation profile offer a unique combination of properties ideal for bone regeneration. These include a fully interconnected porous structure, bone-mimicking mechanical properties, and the possibility of fully regenerating bony defects. Most...journal article 2018
- document
-
Hedayati, R. (author), Sadighi, M. (author), Mohammadi-Aghdam, M (author), Hosseini-Toudeshky, H (author)Additive manufacturing techniques have made it possible to create open-cell porous structures with arbitrary micro-geometrical characteristics. Since a wide range of micro-geometrical features is available for making an implant, having a comprehensive knowledge of the mechanical response of cellular structures is very useful. In this study,...journal article 2018
- document
-
Yang, Y. (author), Knol, Marius (author), van Keulen, A. (author), Ayas, C. (author)Selective laser melting (SLM) wherein a metal part is built in a layer-by-layer manner in a powder bed is a promising and versatile way for manufacturing components with complex geometry. However, components built by SLM suffer from substantial deformation of the part and residual stresses. Residual stresses arise due to temperature gradients...journal article 2018
- document
-
Ahmadi, S.M. (author), Hedayati, R. (author), Li, Y (author), Lietaert, K. (author), Tümer, N. (author), Fatemi, A. (author), Rans, C.D. (author), Pouran, B. (author), Weinans, Harrie (author), Zadpoor, A.A. (author)Additive manufacturing (AM) techniques enable fabrication of bone-mimicking meta-biomaterials with unprecedented combinations of topological, mechanical, and mass transport properties. The mechanical performance of AM meta-biomaterials is a direct function of their topological design. It is, however, not clear to what extent the material type...journal article 2018
- document
-
Verhoef, L.A. (author), Budde, Bart (author), Chockalingam, Cindhuja (author), García Nodar, Brais (author), van Wijk, A.J.M. (author)The effect of disruptive technologies unrelated to the energy sector, such as additive manufacturing (AM), tends to be overlooked in energy scenarios. The present research assessed the potential effect of AM on the global energy demand in four energy scenarios for 2050 with extended versus limited globalisation and limited versus extensive...journal article 2018
- document
-
Hedayati, R. (author), Hosseini-Toudeshky, H. (author), Sadighi, M. (author), Mohammadi-Aghdam, M. (author), Zadpoor, A.A. (author)Advances in additive manufacturing (AM) techniques have enabled fabrication of highly porous titanium implants that combine the excellent biocompatibility of bulk titanium with all the benefits that a regular volume-porous structure has to offer (e.g. lower stiffness values comparable to those of bone). Clinical application of such...journal article 2018