Searched for: +
(61 - 80 of 516)

Pages

document
Wang, Zhongkai (author), Choi, Minsoo (author), Lee, Kyoungtae (author), Park, Kwanseo (author), Liu, Zhaokai (author), Biswas, Ayan (author), Han, Jaeduk (author), Du, S. (author), Alon, Elad (author)
This article presents a 200-Gb/s pulse amplitude-modulation four-level (PAM-4) and 100-Gb/s non-return-to-zero (NRZ) transmitter (TX) in 28-nm CMOS technology. To achieve the target data rate, the output bandwidth and swing of the proposed TX are optimized by minimizing the output capacitance of the 4:1 multiplexer (MUX) and driver stage with...
journal article 2022
document
Wang, Zhongkai (author), Choi, Minsoo (author), Kwon, Paul (author), Lee, Kyoungtae (author), Yin, Bozhi (author), Liu, Zhaokai (author), Park, Kwanseo (author), Biswas, Ayan (author), Du, S. (author)
This paper presents a complete 200Gb/s PAM-4 transmitter (TX) in 28nm CMOS technology. The transmitter features a hybrid sub-sampling PLL (SSPLL) with a delta-sigma (?S) modulator, clock distribution network with flexible timing control, and data path with a hybrid 5-tap Feed-Forward Equalizer (FFE) and T-coil for bandwidth extension. The...
conference paper 2022
document
Lee, J. (author), Mitici, M.A. (author), Geng, S. (author), Yang, M. (author)
When designing the maintenance of multi-component aircraft systems, we consider parameters such as safety margins (used when component replacements are scheduled), and reliability thresholds (used to define data-driven Remaining-Useful-Life prognostics of components). We propose Gaussian process learning and novel adaptive sampling techniques to...
conference paper 2022
document
Lee, J. (author), Mitici, M.A. (author)
The increasing availability of sensor monitoring data has stimulated the development of Remaining-Useful-Life (RUL) prognostics and maintenance planning models. However, existing studies focus either on RUL prognostics only, or propose maintenance planning based on simple assumptions about degradation trends. We propose a framework to integrate...
journal article 2022
document
Lee, J. (author), de Pater, I.I. (author), Boekweit, S.A. (author), Mitici, M.A. (author)
Several studies have proposed Remaining-Useful-Life (RUL) prognostics for aircraft components in the last years. However, few studies focus on integrating these RUL prognostics into maintenance planning frameworks. This paper proposes an optimization model for opportunistic maintenance scheduling of aircraft components that integrates RUL...
conference paper 2022
document
Lee, J. (author), Theuwissen, A.J.P.A.M. (author)
A column-parallel 10-bit SAR ADC for high-speed image sensors has been implemented. A fast offset calibration technique using memory is proposed to compensate for the offset mismatch, accompanied by an ADC designed for a narrow space the size of a single column pitch. The memory accumulates the variation of the offset to track the offset...
journal article 2022
document
Tabone, W. (author), Happee, R. (author), García De Pedro, Jorge (author), Lee, Yee Mun (author), Lupetti, M.L. (author), Merat, Natasha (author), de Winter, J.C.F. (author)
Nine AR interfaces designed using an experience- based, and theoretically informed design approach, were presented in an online questionnaire for user evaluation.<br/>Statistical analysis of presented measures, and the computation of an overall composite score revealed a preference towards traditional and familiar traffic elements.
poster 2022
document
Lee, Rachel (author), Iyer Siddiqi, Anooradha (author)
journal article 2022
document
Garming, M.W.H. (author), Weppelman, I.G.C. (author), Lee, M. (author), Stavenga, T. (author), Hoogenboom, J.P. (author)
Ultrafast scanning electron microscopy images carrier dynamics and carrier induced surface voltages using a laser pump electron probe scheme, potentially surpassing all-optical techniques in probe resolution and surface sensitivity. Current implementations have left a four order of magnitude gap between optical pump and electron probe...
journal article 2022
document
Lee, M. (author), Robin, M.P. (author), Guis, R.H. (author), Filippozzi, U. (author), Shin, D. (author), van Thiel, T.C. (author), Paardekooper, Stijn P. (author), Renshof, Johannes R. (author), van der Zant, H.S.J. (author), Caviglia, A. (author), Verbiest, G.J. (author), Steeneken, P.G. (author)
Although 2D materials hold great potential for next-generation pressure sensors, recent studies revealed that gases permeate along the membrane-surface interface, necessitating additional sealing procedures. In this work, we demonstrate the use of free-standing complex oxides as self-sealing membranes that allow the reference cavity beneath...
journal article 2022
document
Lee, Kelvin (author), Jiang, Yu (author), Ceder, Avishai (Avi) (author), Dauwels, J.H.G. (author), Su, Rong (author), Nielsen, Otto Anker (author)
With the emergence of innovations associated with public transport (PT) services, such as Mobility-as-a-Service, demand responsive transit, and autonomous vehicles, the door-to-door PT journey is achievable via multiple transfers between and within different PT modes. As such, seamless transfers between different modes of public...
journal article 2022
document
Park, Ji Won (author), Kim, S. (author), Noh, Jin Hyung (author), Bae, Young Ho (author), Lee, Jae Woo (author), Maeng, Sung Kyu (author)
From 2022, industrial wastewater discharge regulations in South Korea will replace chemical oxygen demand (COD<sub>Mn</sub>) with total organic carbon (TOC). A shift from COD<sub>Mn</sub> to TOC is a pioneering change in protecting water bodies from organic contaminants. However, several industries are struggling to meet these TOC...
journal article 2022
document
Jeon, Jaemin (author), Kim, Jaeyong (author), Lee, Jong Jun (author), Shin, D. (author), Kim, Yoon Young (author)
This study presents a new modeling technique to estimate the stiffness matrix of a thin-walled beam-joint structure using deep learning. When thin-walled beams meet at joints, significant sectional deformations occur, such as warping and distortion. These deformations should be considered in the one-dimensional beam analysis, but it is...
journal article 2022
document
Ge, Lei (author), Rabiee, Hesamoddin (author), Li, Mengran (author), Subramanian, S.S. (author), Zheng, Yao (author), Lee, Joong Hee (author), Burdyny, T.E. (author), Wang, H. (author)
Electrochemical conversion of gaseous CO<sub>2</sub> to value-added products and fuels is a promising approach to achieve net-zero CO<sub>2</sub> emission energy systems. Significant efforts have been achieved in the design and synthesis of highly active and selective electrocatalysts for this reaction and their reaction mechanism. To perform...
review 2022
document
Chen, Xingyu (author), Lee, Yu Jen (author), Yuan, Tian (author), Lei, Zhongfang (author), Adachi, Yasuhisa (author), Zhang, Zhenya (author), Lin, Y. (author), van Loosdrecht, Mark C.M. (author)
A reasonable recovery of excess sludge may shift the waste into wealth. Recently an increasing attention has been paid to the recycling of extracellular biopolymers from conventional and advanced biological wastewater treatment systems such as flocculent activated sludge (AS), bacterial aerobic granular sludge (AGS), and algal-bacterial AGS...
review 2022
document
Lee, Yuan (author), Bersin, Eric (author), Dahlberg, E.A. (author), Wehner, S.D.C. (author), Englund, Dirk (author)
The past decade has seen tremendous progress in experimentally realizing the building blocks of quantum repeaters. Repeater architectures with multiplexed quantum memories have been proposed to increase entanglement distribution rates, but an open challenge is to maintain entanglement fidelity over long-distance links. Here, we address this...
journal article 2022
document
Choi, Yeon Sik (author), Jeong, Hyoyoung (author), Yin, Rose T. (author), Avila, Raudel (author), Pfenniger, Anna (author), Yoo, Jaeyoung (author), Lee, Jong Yoon (author), Tzavelis, Andreas (author), Rwei, A.Y. (author)
Temporary postoperative cardiac pacing requires devices with percutaneous leads and external wired power and control systems. This hardware introduces risks for infection, limitations on patient mobility, and requirements for surgical extraction procedures. Bioresorbable pacemakers mitigate some of these disadvantages, but they demand pairing...
journal article 2022
document
Kim, Seon Hu (author), Lee, Cheol Ho (author), Han, Sang Hui (author), Wardenier, J. (author)
In this study, existing deformation limits are first re-examined to investigate if they can be rationally extended to high strength steel circular hollow section (CHS) joints that are subjected to in-plane bending (IPB) moment. It is pointed out that existing deformation limits, which have been developed and validated primarily for mild steel...
journal article 2022
document
Siskins, M. (author), Kurdi, S. (author), Lee, M. (author), Slotboom, Benjamin J.M. (author), Xing, Wenyu (author), Mañas-Valero, Samuel (author), Coronado, Eugenio (author), Jia, Shuang (author), Han, Wei (author), van der Sar, T. (author), van der Zant, H.S.J. (author), Steeneken, P.G. (author)
Two-dimensional magnetic materials with strong magnetostriction are attractive systems for realizing strain-tuning of the magnetization in spintronic and nanomagnetic devices. This requires an understanding of the magneto-mechanical coupling in these materials. In this work, we suspend thin Cr<sub>2</sub>Ge<sub>2</sub>Te<sub>6</sub> layers...
journal article 2022
document
Park, S.Y. (author), Lee, Kyung Hoon (author)
Data on the decision-making process of residential burglars at the micro-level are scarce. Furthermore, to the best of our knowledge, none of the related studies have investigated multiple relationships between the design features of a target, a burglar’s assessment of effort and risk involved in the crime, and the final decision on target...
journal article 2022
Searched for: +
(61 - 80 of 516)

Pages