- document
-
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author), Hofman, R. (author), Voskuilen, J. (author)In order to adequately characterize the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) are introduced. Analytical constitutive relations of the MAT device have been derived using the same...conference paper 2013
- document
- Li, Ziru (author), van Terwisga, Tom (author) conference paper 2012
- document
-
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author)In order to characterize adequately the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) have been introduced. Analytical constitutive relations of MAT device have been derived on the basis of...conference paper 2012
- document
-
The influence of spanwise traveling transversal surface waves on the near-wall flow field of turbulent boundary layers with and without adverse pressure gradient is investigated by particle-image velocimetry (PIV) and micro-particle tracking velocimetry (μ-PTV). A detailed analysis of the velocity profile immediately downstream of the actuated...conference paper
- document
-
Guo, Renzhong (author), Yu, Changbin (author), He, Biao (author), Zhao, Zhigang (author), Li, Lin (author), Ying, Shen (author)The establishment of 3D cadastre is imperative and needs support from legal, organizational and technological aspects. In Shenzhen, China, establishment of 3D cadastre has achievedgreat progress. The joint register mechanism was employedfirstly in Shenzhen, and related research is going on, including definitions, visualization and topological...conference paper 2012
- document
-
Guo, Renzhong (author), Ying, Shen (author), Li, Lin (author), Luo, Ping (author), Van Oosterom, Peter (author)With the increasing urban population, and the urban exploitation and utilization, especially in the subsurface and the air, various spaces above and below each other are built and belonging to different owners or users. Although the traditional 2D cadastre still plays a dominant role in land administration, urban resource and space management,...conference paper 2011
- document
-
Wang, Y. (author), Chen, W. (author), Wang, H. (author), Li, R. (author)In this paper, a steady 3D numerical study has been conducted on a 90 mm counter rotating lift fan to investigate its aerodynamic performance. The effect of axial distance between the fans and rotor speed are studied. A low thrust generation has been revealed from the simulation results due to the unfavourable working condition for the upstream...conference paper 2014
- document
-
Zhao, Zhigang (author), Guo, Renzhong (author), Li, Lin (author), Ying, Shen (author)With the accelerated urbanization process, the trend of three-dimensional land use makes the traditional model of 2D cadastral management encounter challenges, because of insufficiency to express in 3D. Therefore, the 3D cadastre and related concepts have been proposed. The breadth and depth of its research are gradually broadened and refined....conference paper 2012
- document
-
Active drag reduction of a turbulent boundary layer has been experimentally investigated using periodic blowing through one array of streamwise slits. Local skin-friction drag exhibits a strong dependence on control parameters, including the blowing amplitude A+ and frequency f +. A maximum drag reduction of almost 70% has been achieved at x+=33...conference paper 2015
- document
-
Naeimi, M. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author), Wu, J. (author), Petrov, R.H. (author), Sietsma, J. (author)The coupled mechanical–thermal behaviour of wheel and rail materials under rolling contact is studied to determine the temperature rise due to the frictional heat. The wheel–rail frictional rolling contact problem is solved using the three–dimensional finite element (FE) method. The FE model considers the wheel tread–rail top contact with...conference paper 2015
- document
-
Xiao, T. (author), Li, D. (author), Cao, Z. (author), Tang, X. (author)Stochastic finite element method and random finite element method can provide rigorous tools for slope reliability analysis incorporating spatial variability of soil properties. However, both of them are difficult to be applied into practice due to the modification of finite-element codes and the low efficiency, respectively. To address these...conference paper 2015
- document
-
Zhang, Jiyi (author), Li, Gang (author), Liu, Youzhi (author), Yin, Pengcheng (author), Yu, Jinyu (author), Shi, Zhifeng (author)Since the introduction of the concept of 3D cadastre, a great many of significant research results have been done. To promote the development of 3D cadatre, 3D cadastre working group sponsored by International Federation Surveyors (FIG) commissions 3 and 7 was organized by Delft University of Technology in 2001. This working group provides a...conference paper 2018
- document
-
Ying, Shen (author), Jin, Fengzan (author), Guo, Renzhong (author), Li, Lin (author), Yang, Jie (author), Zhou, Yujie (author)Due to the fast growth of building construction technology and increasing demands on the efficient use of land, human living space are expanded from on the surface to above and under the earth surface. It raises the need for three dimentional (3D) cadastral by realizing that the current cadastral system based on 2D is not appropriate to reflect...conference paper 2014
- document
- Li, S.B. (author), Xiao, L.O. (author), Song, G.M. (author), Wu, X.M. (author), Sloof, W.G. (author), Van der Zwaag, S. (author) conference paper 2011
- document
-
Ying, Shen (author), Sun, Hanrui (author), Li, Chengpeng (author), Zhang, Wenting (author), Wang, Meng (author), Zhan, Yong (author), Zhang, Yu (author), Chen, Xueye (author)Many immigrants from rural areas pour into urban areas, especially in China, and urban development faces the challenges to provide sufficient space for citizens’ acommodation, works and social contacts. So 3D development and use of land and city space become the reality with various complex buildings and constructions with modern architecture...conference paper 2021
- document
- Li, Jinxuan (author), Liu, Shuxue (author), Zhao, Min (author), Teng, Bin (author) conference paper 2013
- document
- Jamshidi, A. (author), Nunez, A.A. (author), Li, Z. (author) conference paper 2015
- document
-
Li, J. (author), Scarpas, A. (author), Tzimiris, G. (author), Kasbergen, C. (author), Hofman, R. (author), Voskuilen, J. (author)The French five-point bending test (5PBT) provides a laboratory scale test that allows studying the fatigue resistance of surfacing systems on orthotropic steel deck bridges (OSDB). The surfacing structure for OSDB in the Netherlands consists mostly of multilayer system: top porous asphalt layer, guss asphalt layer, steel deck and two membrane...conference paper 2013
- document
-
Ying, S. (author), Guo, R. (author), Li, L. (author), Van Oosterom, P.J.M. (author), Ledoux, H. (author), Stoter, J.E. (author)In this paper the design and development of a prototype 3D Cadastral system will be presented. The key aspects of this system are that the model is based on Land Administration Domain Model (LADM) and that the spatial profile is based on a full 3D topological structure. The prototype development starts with profiling the LADM (selecting relevant...conference paper 2011
- document
-
Oregui, M. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)Rail joints have a shorter service life than most other railway track components. The discontinuity between rail ends turns the rail joint into a weak spot, and consequently, into a track component demanding more frequent maintenance measures, which result in high maintenance costs. Moreover, difficulties are often found when assessing the...conference paper 2012