Searched for: +
(61 - 80 of 332)

Pages

document
Hu, Jie (author), Liu, Zhengxuan (author), Ma, Guochuan (author), Zhang, Guoqiang (author), Ai, Zhengtao (author)
Past studies reveal that air infiltration through the building envelope and its impact on the indoor environment and energy consumption are significantly influenced by climate characteristics. However, little relevant information is available for buildings in southern China, where the building design traditionally follows a philosophy of...
journal article 2023
document
Hu, D. (author), Li, Z. (author), Fan, J. (author), Zhang, Kouchi (author)
As a critical part of speeding up industrial electrification, power electronics, and its packaging technology are undergoing rapid development. Cu nanoparticle sintering technology has therefore received extensive attention for its excellent performance in the die-attachment layer, where the mechanical properties are essential to be known for...
conference paper 2023
document
Hu, Yuyang (author), Doğan, D. (author), Brown, Michael (author), Bulot, Mahé (author), Ferin, Guillaume (author), Leus, G.J.T. (author), Kruizinga, P. (author), Steen, Antonius F.W. (author), Bosch, Johannes G. (author)
It has been previously demonstrated that applying an aberrating mask for 2D compressive imaging using a low number of sensors (elements) can significantly improve image resolution, as evaluated via the point spread function. Here we investigate the potential to apply a similar approach for 3D flow monitoring. We conducted a 3D k-Wave simulation...
conference paper 2023
document
Li, Yangzhi (author), Hu, Yusong (author), Tan, T. (author), Yu, Boyuan (author), Li, Jingwei (author), Fingrut, Adam (author)
The prevailing issue of low housing supply is caused in part by a lack of skilled construction workers. If unskilled residents were adequately equipped, they could potentially address this issue, expanding and adapting their homes without professional builders and designers. This research proposes the use of discrete components to build on...
conference paper 2023
document
Tukker, Arnold (author), Behrens, Paul (author), Deetman, Sebastiaan (author), Hu, Mingming (author), Migoni Alejandre, E. (author), van der Meide, Marc (author), Zhong, Xiaoyang (author), Zhang, Chunbo (author)
In terms of mass, construction materials and construction and demolition waste make up the largest part of humankind's material and waste footprints, particularly after an energy transition has largely phased out fossil energy. However, a circular use of building and construction materials is fraught with challenges.
journal article 2023
document
van Belzen, Jim (author), Fivash, Gregory S. (author), Hu, Zhan (author), Bouma, T.J. (author), Herman, P.M.J. (author)
The establishment of young organisms in harsh environments often requires a window of opportunity (WoO). That is, a short time window in which environmental conditions drop long enough below the hostile average level, giving the organism time to develop tolerance and transition into stable existence. It has been suggested that this kind of...
journal article 2022
document
Liu, Zhou (author), Mirhosseini, S.S. (author), Liu, L. (author), Popov, M. (author), Ma, Kaiqi (author), Hu, Weihao (author), Jamali, Sadegh (author), Palensky, P. (author), Chen, Zhe (author)
To promote the integration of renewable energy resources into modern energy systems, high-voltage dc (HVdc) and circuit breaker (CB) technologies have become critical to achieving secure and efficient energy transmission. This article reviews the technical development of the related areas, compares diverse breaker concepts and topologies,...
journal article 2022
document
Hu, Chunyi (author), van Beljouw, S.P.B. (author), Nam, Ki Hyun (author), Schuler, Gabriel (author), Rodríguez Molina, A. (author), van Eijkeren-Haagsma, A.C. (author), Valk, M. (author), Pabst, Martin (author), Brouns, S.J.J. (author)
The CRISPR-Cas type III-E RNA-targeting effector complex gRAMP/Cas7-11 is associated with a caspase-like protein (TPR-CHAT/Csx29) to form Craspase (CRISPR-guided caspase). Here, we use cryo-electron microscopy snapshots of Craspase to explain its target RNA cleavage and protease activation mechanisms. Target-guide pairing extending into the 5...
journal article 2022
document
Walker, C (author), Kusela, C. (author), Young, A (author), Verts, W. (author), Gao, J.R. (author), Hu, Qing (author), Silva, J. R.G. (author), Mirzaei, B. (author), Laauwen, Wouter (author)
Gal/Xgal U/LDB Spectroscopic/ Stratospheric THz Observatory (GUSTO) is a NASA Explorers Mission of Opportunity that will make large scale maps of the Milky Way and Large Magellanic Cloud in three important interstellar lines: [CII], [OI], and [NII] at 158, 63, and 205 μm, respectively. During its ~75 day stratospheric (~36 km) flight, GUSTO’s 0...
conference paper 2022
document
Dong, Xichao (author), Zhao, Zewei (author), Wang, Yupei (author), Wang, J. (author), Hu, Cheng (author)
Nowadays deep learning-based weather radar echo extrapolation methods have competently improved nowcasting quality. Current pure convolutional or convolutional recurrent neural network-based extrapolation pipelines inherently struggle in capturing both global and local spatiotemporal interactions simultaneously, thereby limiting nowcasting...
journal article 2022
document
Ji, C. (author), Hu, Jiqiang (author), Sadighi, M. (author), Alderliesten, R.C. (author), Wang, Bing (author), Sun, Yuguo (author)
Fiber metal laminates (FMLs) provide a reliable approach for achieving lightweight in high-speed aerospace vehicles. However, the weak interfacial properties between metals and composites could significantly affect the deformation and failure modes of FMLs. In this paper, the low-velocity impact responses and damage mechanisms of CF/PEEK-Ti...
journal article 2022
document
de Roda Husman, S. (author), Hu, Zhongyang (author), Wouters, B. (author), Munneke, Peter Kuipers (author), Veldhuijsen, Sanne (author), Lhermitte, S.L.M. (author)
Surface melt is an important driver of ice shelf disintegration and its consequent mass loss over the Antarctic Ice Sheet. Monitoring surface melt using satellite remote sensing can enhance our understanding of ice shelf stability. However, the sensors do not measure the actual physical process of surface melt, but rather observe the presence...
journal article 2022
document
Cui, Z. (author), Zhang, Y. (author), Hu, D. (author), Vollebregt, S. (author), Fan, J. (author), Fan, X. (author), Zhang, Kouchi (author)
Understanding the atomic diffusion features in metallic material is significant to explain the diffusion-controlled physical processes. In this paper, using electromigration experiments and molecular dynamic (MD) simulations, we investigate the effects of grain size and temperature on the self-diffusion of polycrystalline aluminium (Al). The...
journal article 2022
document
Hu, Yong (author), Baggio, Mariangela (author), Dabironezare, Shahab Oddin (author), Tamminen, Aleksi (author), Toy, Brandon (author), Ala-laurinaho, Juha (author), Brown, Elliot (author), Llombart, Nuria (author), Deng, Sophie X. (author), Wallace, Vincent (author), Taylor, Zachary D. (author)
A system concept for online alignment verification of millimeter-wave, corneal reflectometry is presented. The system utilizes beam scanning to generate magnitude-only reflectivity maps of the cornea at 650 GHz and compares these images to a precomputed/measured template map to confirm/reject sufficient alignment. A system utilizing five off...
journal article 2022
document
Cheng, H. Q. (author), Chen, W. (author), Li, J. F. (author), Jiang, Y. H. (author), Hu, X. (author), Zhang, X. L. (author), Zhou, F. N. (author), Hu, F. X. (author), Stive, M.J.F. (author)
The estuarine turbidity maximum (ETM) in the Yangtze Estuary Delta (YED) is muddy by definition and lacks bottom undulations. However, since 2013, a remarkable change has occurred in the YED. Recent images detected by a multibeam echosounder system, SeaBat 7125, for the first time have confirmed widespread regions of subaqueous dunes in the...
journal article 2022
document
Hu, F. (author), van Leijen, F.J. (author), Chang, L. (author), Wu, Jicang (author), Hanssen, R.F. (author)
Synthetic aperture radar (SAR) missions with short repeat times enable opportunities for near real-time deformation monitoring. Traditional multitemporal interferometric SAR (MT-InSAR) is able to monitor long-term and periodic deformation with high precision by time-series analysis. However, as time series lengthen, it is time-consuming to...
journal article 2022
document
Li, Y. (author), Hu, Cheng (author), Ao, Dongyang (author)
Fast observations of rapid surface large-changes are demanded in disaster evaluations and scientific studies. Digital elevation model (DEM) differencing before and after the events is an effective way to retrieve the changes. Owing to a short repeat cycle, geosynchronous synthetic aperture radar (GEO SAR) systems can quickly obtain repeat...
journal article 2022
document
Zhao, Pengjun (author), Zeng, Liangen (author), Li, Peilin (author), Lu, Haiyan (author), Hu, Haoyu (author), Li, Chengming (author), Zheng, Mengyuan (author), Li, Haitao (author), Yu, Zhao (author), Qi, Y. (author)
The threat of global climate change has caused the international community to pay close attention to atmospheric levels of greenhouse gases such as carbon dioxide. Transportation sector carbon dioxide emissions efficiency (TSCDEE) is a key indicator used to prioritize sustainable development in the transportation sector. In this paper, the...
journal article 2022
document
Zhang, Chunbo (author), Hu, Mingming (author), Di Maio, F. (author), Sprecher, B. (author), Yang, Xining (author), Tukker, Arnold (author)
The construction sector is the biggest driver of resource consumption and waste generation in Europe. The European Union (EU) is making efforts to move from its traditional linear resource and waste management system in the construction sector to a level of high circularity. Based on the theory of circular economy, a new paradigm called waste...
review 2022
document
Liu, C. (author), Yang, Lu (author), Li, Z. (author), Nie, Shuai (author), Hu, Chuanlin (author), Wang, Fazhou (author)
Due to the satisfactory property and high productivity, heat-cured concretes have been widely used in engineering practice. However, heat curing process also brings some drawbacks that are detrimental to the long-term property of this material. To address this issue, lightweight fine aggregate (LWFA) was employed to provide internal curing ...
journal article 2022
Searched for: +
(61 - 80 of 332)

Pages