Searched for: +
(61 - 80 of 370)

Pages

document
Zhou, H. (author), Infante Ferreira, C.A. (author)
CO2 hydrate slurry is a favourable direct coolant of fresh products due to its large latent heat and phase change temperature around 7 °C. Continuous production of this slurry is, however, difficult to realise due to the high rate of hydrate formation. The use of additives is proposed with the purpose of decreasing the formation rate so that the...
journal article 2017
document
Eivani, A.R. (author), Zhou, J. (author)
In this research, hot compression test is used to simulate the metallurgical phenomena occurring in the peripheral part of AA7020 aluminum alloy extrudates during hot extrusion and leading to the formation of the peripheral coarse grain (PCG) structure. The temperature profiles at a tracking point in the peripheral part of extrudates are...
journal article 2017
document
Naddaf Dezfuli, S. (author), Huan, Z. (author), Mol, J.M.C. (author), Leeflang, M.A. (author), Chang, Jiang (author), Zhou, J. (author)
The present research was aimed at developing magnesium-matrix composites that could allow effective control over their physiochemical and mechanical responses when in contact with physiological solutions. A biodegradable, bioactive ceramic - bredigite was chosen as the reinforcing phase in the composites, based on the hypothesis that the...
journal article 2017
document
Li, Nana (author), Jia, Li (author), Lu, Jing (author), Menenti, M. (author), Zhou, J. (author)
The regional surface soil heat flux (G0) estimation is very important for the large-scale land surface process modeling. However, most of the regional G0 estimation methods are based on the empirical relationship between G0 and the net radiation flux. A physical model based on harmonic analysis was improved (referred to as "HM model") and...
journal article 2017
document
Liu, Yang (author), Wu, Yuanhao (author), Bian, Dong (author), Gao, Shuang (author), Leeflang, M.A. (author), Guo, Hui (author), Zheng, Yufeng (author), Zhou, J. (author)
Novel Mg-(3.5, 6.5wt%)Li-(0.5, 2, 4wt%)Zn ternary alloys were developed as new kinds of biodegradable metallic materials with potential for stent application. Their mechanical properties, degradation behavior, cytocompatibility and hemocompatibility were studied. These potential biomaterials showed higher ultimate tensile strength than...
journal article 2017
document
Ye, Xiaotong (author), Leeflang, M.A. (author), Wu, Chengtie (author), Chang, Jiang (author), Zhou, J. (author), Huan, Z. (author)
Porous Ti-6Al-4V scaffolds fabricated by means of selective laser melting (SLM),<br/>having controllable geometrical features and preferable mechanical properties, have been developed as a class of biomaterials that hold promising potential for bone repair. However, the inherent bio-inertness of the Ti-6Al-4V alloy as the matrix of the scaffolds...
journal article 2017
document
Wang, S. (author), Xu, Y. (author), Zhou, J. (author), Li, H. (author), Chang, Jiang (author), Huan, Z. (author)
Iron-matrix composites with calcium silicate (CS) bioceramic as the reinforcing phase were fabricated through powder metallurgy processes. The microstructures, mechanical properties, apatite deposition and biodegradation behavior of the Fe-CS composites, as well as cell attachment and proliferation on<br/>their surfaces, were characterized. In...
journal article 2017
document
Ashrafizadeh, S.M. (author), Eivani, A.R. (author), Jafarian, H.R. (author), Zhou, J. (author)
A two-stage solution treatment composed of an initial soaking at 420 °C for 10 min and the second soaking at 500 °C for 10 min was applied to cold-worked AA6063 aluminum alloy samples after equal channel angular pressing (ECAP) for two and four passes. The microstructures and mechanical properties of the samples were compared with those of...
journal article 2017
document
Fang, G (author), Nguyen, D.T. (author), Zhou, J. (author)
Extrusion through the porthole die is a predominant forming process used in the production of hollow aluminum alloy profiles across the aluminum extrusion industry. Longitudinal weld seams formed during the process may negatively influence the quality of extruded profiles. It is therefore of great importance to understand the formation of...
journal article 2017
document
Lan, Dongming (author), Wang, Xuping (author), Zhou, Pengfei (author), Hollmann, F. (author), Wang, Yonghua (author)
Deep eutectic solvents act as surfactants in biphasic (hydrophobic/aqueous) reaction mixtures enabling higher interfacial surface areas at lower mechanical stress as compared to simple emulsions. Exploiting this effect the rate of a chemoenzymatic epoxidation reaction was increased more than six-fold.
journal article 2017
document
Li, Y. (author), Yong, Bin (author), van Oosterom, P.J.M. (author), Lemmens, M.J.P.M. (author), Wu, Huayi (author), Ren, Liliang (author), Zheng, Mingxue (author), Zhou, Jiajun (author)
The capability of acquiring accurate and dense three-dimensional geospatial information that covers large survey areas rapidly enables airborne light detection and ranging (LiDAR) has become a powerful technology in numerous fields of geospatial applications and analysis. LiDAR data filtering is the first and essential step for digital elevation...
journal article 2017
document
Chen, Liangbiao (author), Zhou, Jiang (author), Chu, Hsing-wei (author), Zhang, Kouchi (author), Fan, Xuejun (author)
While moisture diffusion in microelectronic device and packaging has been studied for decades, the problems involving complex nonlinear moisture diffusion in multi-material assembly have not been fully studied. This paper has developed a general nonlinear diffusion model by adopting water activity, a continuous state variable, as the field...
journal article 2017
document
Zheng, Chaolei (author), Jia, L. (author), Hu, Guangcheng (author), Menenti, M. (author), Lu, Jing (author), Zhou, J. (author), Wang, Kun (author), Li, Zhansheng (author)
The Pan-Eurasian and African Continents are characterized by large ranges of climates varying from humid, semi-humid, semi-arid and arid regions, and great challenges exist in water allocation for different sectors that related to water resource and food security, which depends strongly on the water use information. Quantitative information...
journal article 2017
document
Wang, Xu Ping (author), Zhou, Peng Fei (author), Li, Zhi Gang (author), Yang, Bo (author), Hollmann, F. (author), Wang, Yong Hua (author)
A Ser105Ala mutant of the lipase B from Candida antarctica enables 'perhydrolase-only' reactions. At the example of the chemoenzymatic Baeyer-Villiger oxidation of cyclohexanone, we demonstrate that with this mutant selective oxidation can be achieved in deep eutectic solvent while essentially eliminating the undesired hydrolysis reaction of...
journal article 2017
document
Zhou, Pengfei (author), Wang, Xuping (author), Zeng, Chaoxi (author), Wang, Weifei (author), Yang, Bo (author), Hollmann, F. (author), Wang, Yonghua (author)
A chemoenzymatic method for the production of epoxidized vegetable oils was developed. The unique combination of the commercial lipase G from Penicillieum camembertii with certain deep eutectic solvents enabled the efficient production of epoxidized vegetable oils.
journal article 2017
document
Kooijman, G. (author), Lopes, Wilton (author), Zhou, Z. (author), Guo, H. (author), de Kreuk, M.K. (author), Spanjers, H. (author), van Lier, J.B. (author)
In this work, we investigated the effects of flocculation aid (FA) addition to an anaerobic dynamic membrane bioreactor (AnDMBR) (7 L, 35°C) treating waste-activated sludge (WAS). The experiment consisted of three distinct periods. In period 1 (day 1–86), the reactor was operated as a conventional anaerobic digester with a solids retention...
journal article 2017
document
Zhou, Zhengzheng (author), Smith, James A. (author), Yang, Long (author), Baeck, Mary Lynn (author), Chaney, Molly (author), ten Veldhuis, Marie-claire (author), Deng, Huiping (author), Liu, Shuguang (author)
We examine urban flood response through data-driven analyses for a diverse sample of “small” watersheds (basin scale ranging from 7.0 to 111.1 km<sup>2</sup>) in the Charlotte Metropolitan region. These watersheds have experienced extensive urbanization and suburban development since the 1960s. The objective of this study is to develop a...
journal article 2017
document
Huang, Tianjin (author), Jia, Li (author), Menenti, M. (author), Lu, Jing (author), Zhou, Jie (author), Hu, Guangcheng (author)
We present in this paper a polynomial fitting method applicable to segments of footprints measured by the Geoscience Laser Altimeter System (GLAS) to estimate glacier thickness change. Our modification makes the method applicable to complex topography, such as a large mountain glacier. After a full analysis of the planar fitting method to...
journal article 2017
document
Pan, Dewei (author), Lin, Chengxin (author), Zhou, Zhaoxin (author), Sun, Yuqinag (author), Sun, Yuhao (author)
journal article 2018
document
Zhou, Y. (author), Bellsola Olba, X. (author)
With ongoing trade globalization, waterborne cargo transportation has notably grown in recent years. Due to the growth in ship sizes, with lower manoeuvrability, and higher flows, the safety in these confined areas needs to be guaranteed. Nautical traffic operations in ports are now impacted by more data availability and the disruption of...
journal article 2018
Searched for: +
(61 - 80 of 370)

Pages