Searched for: +
(61 - 80 of 108)

Pages

document
Wu, L. (author), Tiso, P. (author)
Model order reduction techniques are widely applied in the floating frame of reference. The use of linear vibration modes, however, is not applicable when the elastic deformations become finite. In this paper, the non-linear elastic formulation, where the higher-order terms will be included in the strain energy expression to consider the bending...
conference paper 2014
document
Zhang, Y. (author), Wu, B. (author), Zhou, J. (author), Ye, G. (author), Shui, Z. (author)
Concrete containing supplementary cementitious materials (SCMs) has different durability properties from that containing pure Portland cement. The durability of concrete is always associated with the properties of microstructure, especially pore structure. Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry (PDC-MIP) was...
conference paper 2014
document
Wu, P. (author), Voskuijl, M. (author), Van Tooren, M.J.L. (author)
A novel take-off and landing system using ground based power is proposed in the EUFP7 project GABRIEL. The proposed system has the potential benefit to reduce aircraft weight, emissions and noise. A preliminary investigation of the feasibility of the structural design of the connection mechanism between aircraft and ground system has been...
conference paper 2014
document
Garcia Espallargas, S.J. (author), Wu, X. (author)
Recently, encapsulated silyl esters have been shown to act as efficient healing agents for self-healing anticorrosive coatings. While the positive protective effects were irrefutable, the actual protection mechanism has not been clarified yet. In this study, x-ray computed ?-tomography and electrochemical impedance spectroscopy have been...
conference paper 2013
document
Zhu, G. (author), Wu, Z. (author), Zhou, Y. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author)
Epoxy E-51/UF resin microcapsules were prepared by traditional two-stepped in situ polymerization method and processing parameters affecting the final microcapsules’ shape and size were carefully studied in the aim to obtain microcapsule with ideally spherical shape and uniform size. It’s found the polycarboxylate surfactant of SMA (styrene...
conference paper 2013
document
Garcia Espallargas, S.J. (author), Wu, X. (author)
Recently, encapsulated silyl esters have been shown to act as efficient healing agents for self-healing anticorrosive coatings. While the positive protective effects were irrefutable, the actual protection mechanism has not been clarified yet. In this study, x-ray computed ?-tomography and electrochemical impedance spectroscopy have been...
conference paper 2013
document
Prajer, M. (author), Wu, X. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author)
Polymers reinforced with high performance fibres are successfully replacing metal alloys in lightweight aircraft structures. A critical factor in structural design is the resistance of a structure to progressive damage which develops during its service time. The brittle nature of matrix cracking is the main source of composite failure initiating...
conference paper 2013
document
Zhu, G. (author), Zhou, Y. (author), Wu, Z. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author)
The microcapsules of epoxy E-51 resin encapsulated by cured itself were prepared by interfacial curing reaction, in which ethylenediamine (EDA) was employed as curing agent and sulfonated copolymer of styrene and maleic anhydride (SMA) as emulsifying agent. It’s found the morphology of microcapsules strongly depend on reaction time and EDA...
conference paper 2013
document
Prajer, M. (author), Wu, X. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author)
Polymers reinforced with high performance fibres are successfully replacing metal alloys in lightweight aircraft structures. A critical factor in structural design is the resistance of a structure to progressive damage which develops during its service time. The brittle nature of matrix cracking is the main source of composite failure initiating...
conference paper 2013
document
Li, W. (author), Wang, Z.B. (author), Van Maren, D.S. (author), De Vriend, H.J. (author), Wu, B.S. (author)
conference paper 2013
document
Yeung, L.K. (author), Wu, K.L. (author)
The concept of generalized complex inductance for the partial element equivalent circuit (PEEC) technique is introduced to model microstrip radiation problems. Using the semi-analytical Greens functions for microstrip substrates, the imaginary part of this generalized complex inductance can be shown to represent a frequency-dependent resistance...
conference paper 2013
document
Wu, Y.M. (author), Chew, W.C. (author), Jiang, L.J. (author)
In this paper, we propose a frequency independent approach, the numerical steepest descent path method, for computing the physical optics scattered electromagnetic field on the quadratic parabolic and saddle surfaces. Due to the highly oscillatory nature of the physical optics integral in the high frequency regime, the proposed method relies on...
conference paper 2013
document
Hsiao, C.-T. (author), Wu, X. (author), Ma, J. (author), Chahine, G.L. (author)
conference paper 2013
document
Qiu, J. (author), Van de Ven, M.F.C. (author), Schlangen, H.E.J.G. (author), Wu, S. (author), Molenaar, A.A.A. (author)
The traffic volume and the number of heavy vehicles are growing enormously nowadays. There is a need for designing a durable asphalt pavement with innovative technologies. Pavement structures and materials with self healing and self repairing capability are believed to be very useful in such a system. This paper is aiming to understand the self...
conference paper 2012
document
Xiao, Y. (author), Van de Ven, M.F.C. (author), Wu, S.P. (author), Woldekidan, M.F. (author)
Thin surfaces are specially designed to provide significant additional surface properties to pavements without affecting other qualities of the surface such as ride quality and durability. In addition to economic benefits, thin surfaces can protect pavements against deterioration caused by traffic and weather. One of the most important...
conference paper 2012
document
Qiu, J. (author), Molenaar, A.A.A. (author), Van de Ven, M.F.C. (author), Wu, S. (author)
It is a well known fact that asphalt mixtures have self healing capabilities. Yet most of the self healing investigations are carried out using complex and time consuming fatigue tests. In order to investigate the self healing capability in a simple and efficient manner, a beam on elastic foundation test setup (BOEF) is proposed in this paper....
conference paper 2012
document
Li, S.B. (author), Xiao, L.O. (author), Song, G.M. (author), Wu, X.M. (author), Sloof, W.G. (author), Van der Zwaag, S. (author)
conference paper 2011
document
Sloof, W.G. (author), Li, S. (author), Song, G. (author), Kwakernaak, C. (author), Wu, X. (author), Van der Zwaag, S. (author)
conference paper 2011
document
Qiu, J. (author), Van de Ven, M. (author), Molenaar, A. (author), Wu, S. (author), Yu, J. (author)
conference paper 2011
document
Lu, W. (author), Liu, A. (author), Wang, H. (author), Wu, Z. (author)
While heated discussions have been directed towards various innovative procurement systems such as PPP, PFI, and BOT that carry the great expectation to help materialise the projects and deliver value to the society, a procurement system named agent-construction system (ACS or in Chinese Dai Jian Zhi) is being prevailing in China’s public...
conference paper 2011
Searched for: +
(61 - 80 of 108)

Pages