Online Laboratory Sessions for the Education of Electrical Machines and Drives

This paper presents a method to implement online laboratory sessions for education in Electrical Engineering on subjects related to electrical machines and drives. The assignments for the laboratory sessions consist of: the preparation homework, where students have to study relevant theories; the development of circuit simulations; and the...

Decentralized plug-and-play protection scheme for low voltage DC grids

Since the voltages and currents in dc grids do not have a natural zero-crossing, the protection of these grids is more challenging than the protection of conventional ac grids. Literature presents several unit and non-unit protection schemes that rely on communication, or knowledge about the system's topology and parameters in order to...

Offline Reconfigurability Based Substation Converter Sizing for Hybrid AC-DC Distribution Links

Hybrid ac-dc distribution systems with multiple parallel operating ac and dc links are being developed to maximize system capacity during (n-1) contingencies. This paper shows that offline reconfigurability between such ac and dc links post-fault clearance allows an additional design flexibility of reducing the required substation converter...

Carrier-Based Modulated Model Predictive Control for Vienna Rectifiers

The implementation of traditional finite-control-set model predictive control (FCS-MPC) with variable switching frequency in voltage source rectifiers (VSRs) can make the system suffer from poor current harmonics performance. In fact, the resulting wide-spread voltage harmonic generated at the AC terminals makes the design of the typical multi...

LCL Filter Design for Three Phase AC-DC Converters Considering Semiconductor Modules and Magnetics Components Performance

LCL filters are commonly adopted to attenuate the current harmonics produced by Pulse Width Modulation (PWM) Voltage Source Converters (VSC). Due to the nature of LCL filters, several combinations of L and C can deliver the attenuation required by the standards. The optimal configuration is generally evaluated, considering power density, costs,...

Model Predictive Control for the Reduction of DC-link Current Ripple in Two-level Three-phase Voltage Source Inverters

In the applications of three-phase two-level voltage source inverters (VSIs) relatively large energy storage capacitors are used to absorb the high DC-link current ripples mainly caused by the circulating reactive power, the switched AC phase current flowing to the DC-link, and other dynamic and/or asymmetric operating conditions. Especially for...

Detection of Metallic Foreign Objects and Electric Vehicles Using Auxiliary Coil Sets for Dynamic Inductive Power Transfer Systems

This paper proposes a new method of electric vehicles detection (EVD) and foreign objects detection (FOD) for dynamic inductive power transfer (DIPT) systems. The proposed detection method applies both passive coil sets (PCSs) and active coil sets (ACSs) to achieve both EVD and FOD with a high detection sensitivity. The operation mechanisms...

Advantages and Tuning of Zero Voltage Switching in a Wireless Power Transfer System

In charging applications, wireless power transfer (WPT) is mostly used in the form of inductive power transfer with magnetic resonant coupling. Therefore, both the transmitter and the receiver coils are combined with capacitors, such that only active power is transferred. To evaluate the operation of the WPT charging system, its equivalent...

Voltage Source Converter Control under Distorted Grid Voltage for Hybrid AC-DC Distribution Links

Back-To-Back (B2B) Voltage Source Converter (VSC) with AC-side LCL filters can be adopted for parallel AC-DC distribution links. In this paper, Grid-side Current Control (GCC) for the inner/fast control loops of the front- and backend power electronics are implemented in order to enhance the system performance against grid disturbances. Herein,...

Comparative Study of Foreign Object and Misalignment in Inductive Power Transfer Systems

This paper aims to identify the difference between foreign object (FO) and misalignment in terms of their influence on inductive power transfer (IPT) systems. This is performed through magnetic and equivalent circuit analysis of the mutual inductance, primary input impedance, charging pad terminal impedance and current harmonics. Experiment...

Zero Sequence Currents Externally Circulating between the Back to Back Modular Multilevel Converters in Parallel AC-DC Distribution Links

During the operation of a three line ac link in parallel with a ac-dc-ac link system that employs Back-to-Back (B2B)Medium Voltage Modular Multilevel Converters (MMC), a path for the low frequency zero sequence currents is shown to exist. Apart from causing additional losses, these currents can result in limitations on power capacity. A...

Number of Levels, Arm Inductance and Modulation Trade-offs for High Power Medium Voltage Grid-Connected Modular Multilevel Converters

There is an increasing focus on integrating flexible dc links for bulk power routing in medium voltage distribution grids. In such applications, the ac-dc Modular Multilevel Converter (MMC) devised for medium voltage and high-power ratings can be an interesting choice. This paper highlights some less explored design trade-offs arising due to...

Survey on Standards and Regulations for Wireless Charging of Electric Vehicles

In the next decades, the number of electric vehicles (EVs) for private use is predicted to increase considerably. Charging the EVs through wireless power transfer (WPT), i.e. wireless charging, has the potential to shorten charging duration of EVs batteries through dynamic charging and it would also improve the safety of static charging in case...

Suitable Submodule Switch Rating for Medium Voltage Modular Multilevel Converter Design

An important step in Voltage-Source Modular Multilevel Converter (MMC) design is the selection of adequate semiconductor blocking voltage class. This paper highlights that particularly for grid connected medium voltage applications, the choice of suitable switch blocking voltage class is not so straightforward. The market available switch...