Searched for: +
(81 - 100 of 356)

Pages

document
Sun, B. (author), Wang, Xuerui (author), van Kampen, E. (author)
In this paper, we establish an event-triggered intelligent control scheme with a single critic network, to cope with the optimal stabilization problem of nonlinear aeroelastic systems. The main contribution lies in the design of a novel triggering condition with input constraints, avoiding the Lipschitz assumption on the inverse hyperbolic...
journal article 2022
document
Yang, Yapin (author), Sun, Ying (author), Chen, Mingsi (author), Zhou, Yuekuan (author), Wang, Ran (author), Liu, Zhengxuan (author)
Fire at a construction site usually results in serious accidents. Therefore, fire management at the construction site is critical to decreasing possible accidents. However, conventional fire safety management can be problematic in many aspects, such as visualization, multi-stage alarm systems, and dynamic escape route optimization. To solve...
journal article 2022
document
Sun, Junzi (author)
Trajectory optimization has been an active area of research for air transport studies for several decades. But almost all flight optimizers proposed in the literature remain close-sourced, which presents a major disadvantage for the advancement of scientific research. This optimization depends on aircraft performance models, emission models, and...
journal article 2022
document
Marinescu, Marius (author), Olivares, Alberto (author), Staffetti, Ernesto (author), Sun, Junzi (author)
Wind velocity field knowledge is crucial for the future air traffic management paradigm and is key in many applications, such as aircraft performance studies. This paper addresses the problem of spatio-temporal windc velocity field estimation. The north and east wind components within a given air space are estimated as a function of time. Both...
journal article 2022
document
Liu, Xinxin (author), Li, Shuoshuo (author), Liu, Liang (author), He, Chao (author), Sun, Zhuang (author), Özdemir, F. (author), Aziz, Muhammad (author), Kuo, Po-Chih (author)
Because of their compact structure, ease of processing and higher heat transfer coefficient, curved-tube heat exchangers are widely applied in various industry applications, such as nuclear power systems, solar-powered engineering, aircraft engine cooling systems and refrigeration and cryogenic systems. Accurate knowledge about the heat transfer...
journal article 2022
document
Ji, C. (author), Hu, Jiqiang (author), Sadighi, M. (author), Alderliesten, R.C. (author), Wang, Bing (author), Sun, Yuguo (author)
Fiber metal laminates (FMLs) provide a reliable approach for achieving lightweight in high-speed aerospace vehicles. However, the weak interfacial properties between metals and composites could significantly affect the deformation and failure modes of FMLs. In this paper, the low-velocity impact responses and damage mechanisms of CF/PEEK-Ti...
journal article 2022
document
Strohmeier, Martin (author), Olive, Xavier (author), Sun, Junzi (author)
The usage of large private and business jets, from those owned by Elon Musk to Kylie Jenner and Bernard Arnault, has recently attracted considerable attention in many countries. Enabled by open and crowdsourced aircraft tracking systems based on the automatic dependent surveillance–broadcast protocol, the aircraft and their owners have been...
journal article 2022
document
Sun, Junzi (author), Olive, Xavier (author), Strohmeier, Martin (author)
Civil aviation contributes to rising global greenhouse gas emissions. Flights carried out by private and business jets are only a very small fraction of commercial passenger flights. However, these private flights are extremely environmentally inefficient and account for the most emissions per passenger in the aviation sector. While the...
journal article 2022
document
Cheng, Long (author), Zhang, Lei (author), Liu, X. (author), Yuan, Fang (author), Ma, Yang (author), Sun, Yinqing (author)
Reliable assessment of the fatigue resistance of asphalt pavement with a long-term service is critically crucial for the rational formulation of original pavement utilization strategies in reconstruction and expansion projects. Currently, the pavement performance evaluation indicators are mainly used to guide pavement preventive maintenance,...
journal article 2022
document
Sun, Beibei (author), Sun, Yubo (author), Ye, G. (author), De Schutter, Geert (author)
In this paper, a series of experiments were conducted to systematically and quantitively explore the effects of control factors on the early age properties, i.e., workability and strength of slag and fly ash-based alkali-activated paste (BFS/FA-AAP). The control factors on the workability (flowability and setting time) of BFS/FA-AAP include...
journal article 2022
document
Sun, Yubo (author), Ghorbani, Saeid (author), Dai, Xiaodi (author), Ye, G. (author), De Schutter, Geert (author)
This study provides a detailed investigation on the reproducibility of two groups of alkali-activated slag (AAS) mixtures, from both fresh properties and strength development perspectives. Three different commercial sodium silicate solutions and one lab-produced silicate activator (made of silica fume and sodium hydroxide) were used to...
journal article 2022
document
Wang, Kai (author), Xue, Yu (author), Xu, Hao (author), Huang, Lianzhong (author), Ma, Ranqi (author), Zhang, Peng (author), Jiang, X. (author), Yuan, Yupeng (author), Negenborn, R.R. (author), Sun, Peiting (author)
Wing-diesel engine-powered hybrid ships can effectively reduce fuel consumption and CO<sub>2</sub> emissions by using wind energy as the auxiliary driving power. The energy optimization management of the hybrid system can further improve the ship's energy efficiency. To achieve this purpose, it is significant to establish an effective energy...
journal article 2022
document
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)
This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...
journal article 2022
document
Lai, F. (author), Liu, Songyu (author), Li, Yaoliang (author), Sun, Yanxiao (author)
The development of installation technologies of open caissons has been lagging behind increasingly complex construction conditions. For such purpose, a new installation technology of large diameter deeply-buried (LDDB) open caissons has been developed and then used for construction of twin LDDB caissons into undrained ground with stiff soils...
journal article 2022
document
Xing, Chao (author), Liu, Bo (author), Sun, Zhiqi (author), Tan, Yiqiu (author), Liu, X. (author), Zhou, Changhong (author)
Asphalt mixture is a skeleton filling system consisting of aggregate, asphalt, and mineral powder. High performance asphalt mixture design is directly affected by internal stress transmission of skeleton filling system. In this paper, the discrete element method based on digital image was employed to study the stress transmission. By...
journal article 2022
document
Zhang, Hongzhi (author), Shao, Yingxuan (author), Zhang, Ning (author), Tawfek, Abdullah M. (author), Guan, Yanhua (author), Sun, Renjuan (author), Tian, Changjin (author), Šavija, B. (author)
Engineered cementitious composites (ECCs) belong to a broad class of fibre-reinforced concrete. They incorporate synthetic polyvinyl alcohol (PVA) fibres, cement, fly ash and fine aggregates, and are designed to have a tensile strain capacity typically beyond 3%. This paper presents an investigation on the carbonation behaviour of engineered...
journal article 2022
document
Sun, H. (author), Wang, Haiqing (author), Yang, M. (author), Reniers, G.L.L.M.E. (author)
Chemical process systems involve complex dynamic processes, and the state of the system often fluctuates during the production process. To ensure the continuation of production, these fluctuations are often ignored or processed online instead of shutting down the unit. However, the interdependence between components in the system is strong, and...
journal article 2022
document
Xu, H. (author), Tian, Zhan (author), Sun, Laixiang (author), Ye, Qinghua (author), Ragno, E. (author), Bricker, J.D. (author), Tan, Jinkai (author), Ke, Q. (author), Wang, Shuai (author)
Compound flooding is generated when two or more flood drivers occur simultaneously or in close succession. Multiple drivers can amplify each other and lead to greater impacts than when they occur in isolation. A better understanding of the interdependence between flood drivers would facilitate a more accurate assessment of compound flood risk...
journal article 2022
document
Sun, Yubo (author), Tao, Yaxin (author), Rahul, A. V. (author), Ye, G. (author), De Schutter, Geert (author)
The rapid workability loss of alkali-activated materials (AAM) has been a major obstacle limiting its onsite application. In this study, two conventional SPs (made of polynaphthalene sulfonate (PNS) and lignosulfonate (LS) salts), which have been reported to be effective in some specific AAM mixtures were separately applied in alkali...
journal article 2022
document
Gan, Naifeng (author), Sun, S.Z. (author), Zhang, Zhaosheng (author), Xu, Shiqi (author), Liu, Peng (author), Qin, Z. (author)
The overdischarge can significantly degrade a lithium-ion (Li-ion) battery's lifetime. Therefore, it is important to detect the overdischarge and prevent severe damage of the Li-ion battery. Depending on the battery technology, there is a minimum voltage (cutoff voltage) that the battery is allowed to be discharged in common practice. Once the...
journal article 2022
Searched for: +
(81 - 100 of 356)

Pages