- document
-
Boorsma, Nina (author), Balkenende, R. (author), Bakker, C.A. (author), Tsui, T.P.Y. (author), Peck, David (author)Adopting design approaches that allow products to last multiple use-cycles supports European Commission objectives to reduce greenhouse gas emissions and reduce primary material impacts. Remanufacturing is an example of an appropriate circular strategy and it can be applied in a variety of industries that are intensive materials users....journal article 2020
- document
-
van Altena, V.P. (author), Krans, Jan (author), Bakker, Henk (author), Stoter, J.E. (author)Building on a plethora of conjectured emendations for IOÏ'ΔAIAN, this article approaches the issue once again to test the viability of a quantitative tool and to establish the possibility of palaeographical confusion of IOÏ'ΔAIAN with an alternative topo- or demonym. The article starts with an experiment using Greek topo- and demonyms derived...journal article 2020
- document
-
van den Boomen, M. (author), Bakker, H.L.M. (author), Schraven, D.F.J. (author), Hertogh, M.J.C.M. (author)In the Netherlands, probabilistic life cycle cash flow forecasting for infrastructures has gained attention in the past decennium. Frequencies, volume and unit prices of life cycle activities are treated as uncertainty variables for which an expert-based triangular distribution is assumed. The current research observes the absence of time...journal article 2020
- document
-
Sauerwein, M. (author), Zlopasa, J. (author), Doubrovski, E.L. (author), Bakker, C.A. (author), Balkenende, R. (author)The circular economy requires high-value material recovery to enable multiple product lifecycles. This implies the need for additive manufacturing to focus on the development and use of low-impact materials that, after product use, can be reconstituted to their original properties in terms of printability and functionality. We therefore...journal article 2020
- document
-
Chen, L. (author), Ling, Fangqiong (author), Bakker, Geo (author), Liu, Wen Tso (author), Medema, G.J. (author), van der Meer, W.G.J. (author), Liu, G. (author)Worldwide, it is common that the drinking water distribution systems (DWDSs) may be subjected to changes of supply water quality due to the needs of upgrading the treatment processes or switching the source water. However, the potential impacts of quality changed supply water on the stabilized ecological niches within DWDSs and the associated...journal article 2020
- document
-
Jacobsen, Niels G. (author), Bakker, Wout (author), Uijttewaal, W.S.J. (author), Uittenbogaard, Rob (author)The work presents an experimental investigation into the motion of and hydrodynamic forces along a single flexible stem in regular waves. The experiment covers a large range in relevant non-dimensional parameters: the drag-to-stiffness ratio, the inertia-to-stiffness ratio, the Keulegan-Carpenter number and the Reynolds number. The two first...journal article 2019
- document
-
Molaei, M. (author), Bosch-Rekveldt, M.G.C. (author), Bakker, H.L.M. (author)The main aim of this study is to gain insights into project management professionals’ perception of how project success can be achieved. The Q-methodology was followed in this research. Based on an extensive literature review and validation through expert judgment, a framework consisting of 33 factors increasing the likelihood of success was...journal article 2019
- document
-
Bakker, N.J. (author), Åhman, Hanna Nilsson (author), Aantjes, Kees (author), Barreau, Nicolas (author), Weeber, A.W. (author), Theelen, Mirjam (author)Partial shading of Cu(In,Ga)Se<sub>2</sub> modules can lead to the formation of reverse bias induced wormlike defects. These wormlike defects act as local shunts and permanently decrease module output. A good understanding of the formation and propagation mechanisms of these defects is needed in order to mitigate the negative effects, or to...journal article 2019
- document
-
Bradley, C.E. (author), Randall, J.A.D. (author), Abobeih, M.H.M.A. (author), Berrevoets, R.C. (author), Degen, M.J. (author), Bakker, M. (author), Markham, M. (author), Twitchen, D. J. (author), Taminiau, T.H. (author)Spins associated with single defects in solids provide promising qubits for quantum-information processing and quantum networks. Recent experiments have demonstrated long coherence times, high-fidelity operations, and long-range entanglement. However, control has so far been limited to a few qubits, with entangled states of three spins...journal article 2019
- document
-
van Engelshoven, Y.D. (author), Wen, P. (author), Bakker, M.C.M. (author), Balkenende, R. (author), Rem, P.C. (author)An innovative route for plastics recycling is proposed, based on a combination of a logarithmic sorting process and colour plus high-resolution near-infrared (NIR) sensors. Although counterintuitive, it is shown that such a technology could sort clean flakes from rigid packaging waste into a very large number of different plastic grades with...journal article 2019
- document
-
des Tombe, B.F. (author), Bakker, M. (author), Smits, F.J.C. (author), Schaars, Frans (author), van der Made, Kees Jan (author)An approach is presented to determine groundwater flow in unconsolidated aquifers with a heat pulse response test using a heating cable and a fiber-optic cable. The cables are installed together using direct push so that the cables are in direct contact with the aquifer. The temperature response is measured for multiple days along the fiber...journal article 2019
- document
-
Sauerwein, M. (author), Doubrovski, E.L. (author), Balkenende, R. (author), Bakker, C.A. (author)Additive manufacturing, also known as 3D printing, is acknowledged for its potential to support sustainable design. In this paper, we explore whether the opportunities that additive manufacturing offers for sustainable design are also useful when designing for a circular economy, and to what extent additive manufacturing can support design...journal article 2019
- document
-
Bakker, M. (author)A new analytic solution is presented for tidal propagation in multilayer coastal aquifers consisting of an arbitrary number of layers. The solution is derived using matrix calculus and may be applied to simulate tidal propagation in systems where aquifer layers are separated by leaky layers of low permeability or in stratified aquifers. The head...journal article 2019
- document
-
Obergfell, C.C.A. (author), Bakker, M. (author), Maas, C. (author)A new method is presented to estimate average diffuse aquifer recharge of water table aquifers in temperate climates using time series analysis of water table level fluctuations. An accurate estimate of the recharge caused by rainfall requires an accurate estimate of the influence of evaporation. In temperate climates, evaporation imprints a...journal article 2019
- document
-
Obergfell, C.C.A. (author), Bakker, M. (author), Maas, C. (author)Time series analysis is applied to identify and analyze a transition in the groundwater regime in the aquifer below the sand ridge of Salland in the Netherlands, where groundwater regime refers to the range of head variations throughout the seasons. Standard time series analysis revealed a discrepancy between modeled and observed heads in...journal article 2019
- document
-
Klamer, Pim (author), Gruis, V.H. (author), Bakker, Cok (author)Purpose: Information verification is an important factor in commercial valuation practice. Valuers use their professional autonomy to decide on the level of verification required, thereby creating an opportunity for client-related judgement bias in valuation. The purpose of this paper is to assess the manifestation of client attachment risks...journal article 2019
- document
-
van Altena, V.P. (author), Krans, Jan (author), Bakker, Henk (author), Dukai, B. (author), Stoter, J.E. (author)Before the interpretation of any text can start, the original wording of the text itself must be critically established. Conventionally, this is done following qualitative criteria. This article, however, explores the application of spatial analyses to New Testament textual criticism by demonstrating how the Levenshtein edit distance could be...journal article 2019
- document
-
Bakker, R.R. (author), Barnhoorn, A. (author)We study the potential formation damage effects due to radial jet drilling on Bentheim sandstone, a homogeneous sandstone that is well established in terms of mechanical properties and widely used as reservoir analogue. We quantify how properties degrade with distance from a jetted hole on μm scale (porosity) and cm scale (compressive, tensile...journal article 2019
- document
-
Bakker, M. (author), Schaars, Frans (author)Time series analysis is a data-driven approach to analyze time series of heads measured in an observation well. Time series models are commonly much simpler and give much better fits than regular groundwater models. Time series analysis with response functions gives insight into why heads vary, while such insight is difficult to gain with black...journal article 2019
- document
-
Collenteur, R.A. (author), Bakker, M. (author), Caljé, Ruben (author), Klop, Stijn A. (author), Schaars, Frans (author)Time series analysis is an increasingly popular method to analyze heads measured in an observation well. Common applications include the quantification of the effect of different stresses (rainfall, pumping, etc.), and the detection of trends and outliers. Pastas is a new and open source Python package for the analysis of hydrogeological time...journal article 2019