Searched for: +
(101 - 120 of 474)

Pages

document
Bakker, J.H. (author), Washington, Adam L. (author), Parnell, S.R. (author), van Well, A.A. (author), Pappas, C. (author), Bouwman, W.G. (author)
SESANS data analysis has been implemented in the SasView software package, allowing SESANS experiments to be analyzed using a numerical Hankel transformation of isotropic small-angle scattering (SAS) models. The error of the numerical approximation is three orders of magnitude below typical experimental errors. All advanced data fitting...
journal article 2020
document
Pozo Arcos, B. (author), Bakker, C.A. (author), Flipsen, Bas (author), Balkenende, R. (author)
Fault diagnosis is the process of identifying and characterising a fault when a failure occurs. It is, therefore, an essential step to take before product-repair. In this study, we ask how conventional users diagnose faults in household appliances and how the design of these appliances facilitates or hampers the process of fault diagnosis.To...
journal article 2020
document
Fockaert, L.I. (author), Ganzinga-Jurg, Deborah (author), Versluis, Jan (author), Boelen, Berend (author), Bakker, Huib J. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
The molecular configuration and chemistry at the zinc/zinc oxide-polyester interface were studied by using two complementary spectroscopic techniques: attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and sum-frequency generation (SFG) spectroscopy. It was shown that ATR-FTIR should be considered as a (3D)...
journal article 2020
document
Urgilez Vinueza, A.R. (author), Robles, Jessica (author), Bakker, M. (author), Guzman, Pablo (author), Bogaard, T.A. (author)
The high landslide risk potential along the steep hillslopes of the Eastern Andes in Ecuador provides challenges for hazard mitigation, especially in areas with hydropower dams and reservoirs. The objective of this study was to characterize, understand, and quantify the mechanisms driving the motions of the Guarumales landslide. This 1.5 km...
journal article 2020
document
van Dam, Eliane P. (author), Giubertoni, Giulia (author), Burla, Federica (author), Koenderink, G.H. (author), Bakker, Huib J. (author)
We study the relation between the macroscopic viscoelastic properties of aqueous hyaluronan polymer solutions and the molecular-scale dynamics of water using rheology measurements, differential dynamic microscopy, and polarization-resolved infrared pump-probe spectroscopy. We observe that the addition of hyaluronan to water leads to a slowing...
journal article 2020
document
James, Rebecca K. (author), Christianen, Marjolijn J.A. (author), van Katwijk, Marieke M. (author), de Smit, Jaco C. (author), Bakker, Elisabeth S. (author), Herman, P.M.J. (author), Bouma, T.J. (author)
Seagrasses provide an important ecosystem service by creating a stable erosion-resistant seabed that contributes to effective coastal protection. Variable morphologies and life-history strategies, however, are likely to impact the sediment stabilization capacity of different seagrass species. We question how opportunistic invasive species and...
journal article 2020
document
Lepillier, B.P. (author), Yoshioka, Keita (author), Parisio, Francesco (author), Bakker, R.R. (author), Bruhn, D.F. (author)
In every tight formation reservoir, natural fractures play an important role for mass and energy transport and stress distribution. Enhanced Geothermal Systems (EGS) make no exception, and stimulation aims at increasing the reservoir permeability to enhance fluid circulation and heat transport. EGS development relies upon the complex task of...
journal article 2020
document
van Altena, V.P. (author), Krans, Jan (author), Bakker, Henk (author), Stoter, J.E. (author)
The appearance of ουδα » αν in the table of nations (Acts 2:9-11) has troubled interpreters for centuries. Several scholars have proposed to emendate the text. The argumentations for such conjectures vary in elaboration and support. This article gives a diachronic overview of the conjectured emendations. It concludes with an evaluation of the...
review 2020
document
Boorsma, Nina (author), Balkenende, R. (author), Bakker, C.A. (author), Tsui, T.P.Y. (author), Peck, David (author)
Adopting design approaches that allow products to last multiple use-cycles supports European Commission objectives to reduce greenhouse gas emissions and reduce primary material impacts. Remanufacturing is an example of an appropriate circular strategy and it can be applied in a variety of industries that are intensive materials users....
journal article 2020
document
van Altena, V.P. (author), Krans, Jan (author), Bakker, Henk (author), Stoter, J.E. (author)
Building on a plethora of conjectured emendations for IOÏ'ΔAIAN, this article approaches the issue once again to test the viability of a quantitative tool and to establish the possibility of palaeographical confusion of IOÏ'ΔAIAN with an alternative topo- or demonym. The article starts with an experiment using Greek topo- and demonyms derived...
journal article 2020
document
van den Boomen, M. (author), Bakker, H.L.M. (author), Schraven, D.F.J. (author), Hertogh, M.J.C.M. (author)
In the Netherlands, probabilistic life cycle cash flow forecasting for infrastructures has gained attention in the past decennium. Frequencies, volume and unit prices of life cycle activities are treated as uncertainty variables for which an expert-based triangular distribution is assumed. The current research observes the absence of time...
journal article 2020
document
Sauerwein, M. (author), Zlopasa, J. (author), Doubrovski, E.L. (author), Bakker, C.A. (author), Balkenende, R. (author)
The circular economy requires high-value material recovery to enable multiple product lifecycles. This implies the need for additive manufacturing to focus on the development and use of low-impact materials that, after product use, can be reconstituted to their original properties in terms of printability and functionality. We therefore...
journal article 2020
document
Chen, L. (author), Ling, Fangqiong (author), Bakker, Geo (author), Liu, Wen Tso (author), Medema, G.J. (author), van der Meer, W.G.J. (author), Liu, G. (author)
Worldwide, it is common that the drinking water distribution systems (DWDSs) may be subjected to changes of supply water quality due to the needs of upgrading the treatment processes or switching the source water. However, the potential impacts of quality changed supply water on the stabilized ecological niches within DWDSs and the associated...
journal article 2020
document
Bakker, N.J. (author), Weeber, A.W. (author), Theelen, Mirjam (author)
Partial shading of Cu(In,Ga)(Se,S)2 (CIGS) photovoltaic (PV) modules is getting more attention, as is witnessed by the increase in publications on this topic in recent years. This review will give an overview of shading tests executed on CIGS modules and focuses on the more fundamental aspects that are often studied on cells. Generally, CIGS...
review 2019
document
Barnhoorn, A. (author), Bakker, R.R. (author), Douma, L.A.N.R. (author), Pluymakers, Anne (author), Bertotti, G. (author)
poster 2019
document
van Dam, S.S. (author), Bakker, C.A. (author), Hazenoot, Thomas (author), Mihelič, Aleš (author)
This paper presents the result of a co-creation and context mapping study amongst seventeen washing machines users. The users had widely varying experiences with products offered through alternative ownership models, including three who were active users of a washing machine with pay-per-use or monthly subscription model. Through the co-creation...
conference paper 2019
document
Jacobsen, Niels G. (author), Bakker, Wout (author), Uijttewaal, W.S.J. (author), Uittenbogaard, Rob (author)
The work presents an experimental investigation into the motion of and hydrodynamic forces along a single flexible stem in regular waves. The experiment covers a large range in relevant non-dimensional parameters: the drag-to-stiffness ratio, the inertia-to-stiffness ratio, the Keulegan-Carpenter number and the Reynolds number. The two first...
journal article 2019
document
Nicolay, Johan (author), de Langen, Gilles (author), Stöver, Jos (author), Aalbersberg, Gerard (author), Bahlen, Gregory (author), Bakker, Marco (author), Huisman, Hans (author), Mantel, Stephan (author), Ngan-Tillard, D.J.M. (author)
book chapter 2019
document
Molaei, M. (author), Bosch-Rekveldt, M.G.C. (author), Bakker, H.L.M. (author)
The main aim of this study is to gain insights into project management professionals’ perception of how project success can be achieved. The Q-methodology was followed in this research. Based on an extensive literature review and validation through expert judgment, a framework consisting of 33 factors increasing the likelihood of success was...
journal article 2019
document
Lepillier, B.P. (author), Bruhn, D.F. (author), Daniilidis, Alexandros (author), Bruna, P.B.R. (author), Bakker, R.R. (author), Bastesen, Eivind (author), Wheeler, Walter (author), Torabi, Anita (author), Garcia, Oscar (author)
poster 2019
Searched for: +
(101 - 120 of 474)

Pages