Searched for: +
(1 - 20 of 77)

Pages

document
Sobera, M.P. (author), Kleijn, C.R. (author)
We study flow and heat transfer to a cylinder in cross flow at Re = 3,900–80,000 by means of three-dimensional transient RANS (T-RANS) simulations, employing an RNG k???? turbulence model. Both the case of a bare solid cylinder and that of a solid cylinder surrounded at some fixed distance by a thin porous layer have been studied. The latter...
journal article 2008
document
Merci, B. (author), Naud, B. (author), Roekaerts, D. (author), Maas, U. (author)
Two transported PDF strategies, joint velocity-scalar PDF (JVSPDF) and joint scalar PDF (JSPDF), are investigated for bluff-body stabilized jet-type turbulent diffusion flames with a variable degree of turbulence–chemistry interaction. Chemistry is modeled by means of the novel reaction-diffusion manifold (REDIM) technique. A detailed chemistry...
journal article 2008
document
Pál, Botond (author), Roekaerts, D.J.E.M. (author), Zandbergen, B.T.C. (author)
This study investigates the potential of a newly released multi-phase solver to simulate atomisation in an air-blast type atomiser. The 'VOF-to-DPM' solver was used to simulate primary and secondary atomisation in an atomiser with a coaxial injector-like geometry. The solver uses a hybrid Eulerian/Eulerian-Lagrangian formulation with...
journal article 2021
document
Hosseini, A. (author), Dhiman, Vinod (author), Meijer, Koen (author), Zeilstra, Christiaan (author), Hage, Johannes (author), Peeters, Tim (author), Offerman, S.E. (author), Yang, Y. (author)
A three-dimensional computational fluid dynamics (CFD) model for the HIsarna off-gas system is set up and validated by real plant data. In the model detailed reaction mechanism and kinetic data for post-combustion of CO-H2 mixture and carbon particles are incorporated. The results are presented and discussed in another study (Part 1) by the...
journal article 2022
document
Haringa, C. (author), Tang, W. (author), Noorman, H.J. (author)
The compartment model (CM) is a well-known approach for computationally affordable, spatially resolved hydrodynamic modeling of unit operations. Recent implementations use flow profiles based on Computational Fluid Dynamics (CFD) simulations, and several authors included microbial kinetics to simulate gradients in bioreactors. However, these...
journal article 2022
document
Lovato, S. (author), Kirichek, Alex (author), Toxopeus, S.L. (author), Settels, J.W. (author), Keetels, G.H. (author)
When investigating the effect of muddy seabeds on marine vessels using Computational Fluid Dynamics (CFD) software, one challenge is to adequately describe the complex non-Newtonian fluid behaviour of mud. Although a number of rheological models have been proposed in the past, mud sediments are often simply regarded either as highly viscous...
journal article 2022
document
Schouten, T.D. (author), van Rhee, C. (author), Keetels, G.H. (author)
In dredging applications, deep sea mining and land reclamation projects typically large amounts of sediments are transported through pipes in the form of hyper concentrated (40% sediment or more) sediment-water mixtures or slurries. In this paper it is investigated how well a generic Euler-Euler CFD-model is capable to model velocity,...
journal article 2021
document
Hur, C. (author), Ferreira, Carlos (author), Schepers, Gerard (author)
Horizontal axis wind turbines (HAWTs) experience yaw misalignments due to the physical limitations of yaw controllers and various novel active yaw controls. Moreover, the motion of floating offshore wind turbines (FOWTs) accelerates yaw misalignment. The blade element momentum (BEM) method is widely used due to its computational efficiency for...
journal article 2022
document
Rijkens, A.A.K. (author), Mikelic, A. (author)
The seakeeping behaviour of naval ships is an important factor for its operational effectiveness, as vessels with good seakeeping abilities are able to go to sea and successfully execute their missions despite possible adverse weather conditions. Hence, it is not surprising that the hydrodynamic assessment of a new frigate type hull forms is...
journal article 2022
document
Perinajová, R. (author), van Ooij, Pim (author), Kenjeres, S. (author)
A long-time exposure to lack of oxygen (hypoxia) in some regions of the cerebrovascular system is believed to be one of the causes of cerebral neurological diseases. In the present study, we show how a combination of magnetic resonance imaging (MRI) and computational fluid dynamics (CFD) can provide a noninvasive alternative for studying...
journal article 2023
document
Dutta, Debasish (author), Afzal, Mohammad Saud (author), Alhaddad, S.M.S. (author)
This study utilizes three-dimensional simulations to investigate scour in combined wave–current flows around rectangular piles with various aspect ratios. The simulation model solves the Reynolds-averaged Navier–Stokes (RANS) equations using the k–ω turbulence model, and couples the Exner equation to compute bed elevation changes. The model also...
journal article 2023
document
Kenjeres, S. (author)
This work presents an application of a RANS/LES hybrid approach in simulating flows and turbulent dispersion in complex urban areas. It is demonstrated that the<br/>hybrid approach correctly captures the time-dependent behavior of the wake regions behind buildings, resulting in improvements of the total turbulent kinetic energy and, consequently...
journal article 2019
document
Hogervorst, T.A. (author), Nane, R. (author), Marchiori, Giacomo (author), Qiu, Tong Dong (author), Blatt, Markus (author), Rustad, Alf Birger (author)
Scientific computing is at the core of many High-Performance Computing applications, including computational flow dynamics. Because of the utmost importance to simulate increasingly larger computational models, hardware acceleration is receiving increased attention due to its potential to maximize the performance of scientific computing....
journal article 2022
document
Lancelot, P.M.G.J. (author), De Breuker, R. (author)
In this paper, we present a data-driven method to model the unsteady non-linear response of aircraft control surfaces. This method relies on aerodynamic reduced-order models (ROM) derived from computational fluid dynamics with Reynolds averaged Navier-Stokes (CFD-RANS) analysis in the transonic domain. The ROM consists of a combination of look...
journal article 2021
document
Lovato, S. (author), Keetels, G.H. (author), Toxopeus, S. L. (author), Settels, J. W. (author)
This article presents a new turbulence closure based on the k-ω SST model for predicting turbulent flows of Herschel–Bulkley fluids, including Bingham and power-law fluids. The model has been calibrated with direct numerical simulations (DNS) data for fully-developed pipe flow of shear-thinning and viscoplastic fluids. The new model shows...
journal article 2022
document
Zou, P. (author), Bricker, J.D. (author), Chen, L. Z. (author), Uijttewaal, W.S.J. (author), Ferreira, Carlos (author)
In order to assess the dynamic performance of a submerged floating tunnel (SFT) subject to flow-induced vibration (FIV) conditions in a practical engineering application, a one-way fluid–structure interaction (FSI) model consisting of multi-scale hydrodynamic solvers combined with the finite element method (FEM) is established. A typical long...
journal article 2022
document
Perinajová, R. (author), Juffermans, Joe F. (author), Westenberg, Jos J.M. (author), van der Palen, Roel L.F. (author), van den Boogaard, Pieter J. (author), Lamb, Hildo J. (author), Kenjeres, S. (author)
Aortic aneurysm is associated with aberrant blood flow and wall shear stress (WSS). This can be studied by coupling magnetic resonance imaging (MRI) with computational fluid dynamics (CFD). For patient-specific simulations, extra attention should be given to the variation in segmentation of the MRI data-set and its effect on WSS. We performed...
journal article 2021
document
Lidtke, Artur K. (author), Klapwijk, M.D. (author), Lloyd, Thomas (author)
Inflow turbulence is relevant for many engineering applications relating to noise generation, including aircraft wings, landing gears, and non-cavitating marine propellers. While modelling of this phenomenon is well-established for higher Mach number aerospace problems, lower Mach number applications, which include marine propellers, still...
journal article 2021
document
Qian, Yi’Nan (author), Wang, Yuanshun (author), Fang, Zhenlong (author), Chen, X. (author), Miedema, S.A. (author)
A jet pump is used to transport a variety of working media and is especially suitable for dredged soil transporting. In this study, a three-dimensional numerical study of a jet pump that is used for slurry delivery was carried out. The characteristics of the internal flow field of the mixing chamber with different working parameters were...
journal article 2021
document
Zou, P. (author), Bricker, J.D. (author), Uijttewaal, W.S.J. (author)
The interaction between an oceanic internal solitary wave (ISW) and a prototype submerged floating tunnel (SFT) is numerically investigated. Effect of oceanic internal solitary wave amplitude, the relative distance of the SFT to the pycnocline, cross-sectional geometry of the SFT, and the density ratio of the two fluid layers are analyzed. At...
journal article 2021
Searched for: +
(1 - 20 of 77)

Pages