document

Additively manufactured biodegradable porous magnesium

Li, Y. (author), Zhou, J. (author), Pavanram, P. (author), Leeflang, M.A. (author), Fockaert, L.I. (author), Pouran, B. (author), Tümer, N. (author), Schröder, K. U. (author), Mol, J.M.C. (author), Weinans, Harrie (author), Jahr, H. (author), Zadpoor, A.A. (author)

An ideal bone substituting material should be bone-mimicking in terms of mechanical properties, present a precisely controlled and fully interconnected porous structure, and degrade in the human body to allow for full regeneration of large bony defects. However, simultaneously satisfying all these three requirements has so far been highly...

journal article 2017

document

Additively manufactured biodegradable porous iron

Li, Y. (author), Jahr, H. (author), Lietaert, K. (author), Pavanram, P. (author), Yilmaz, A. (author), Fockaert, L.I. (author), Leeflang, M.A. (author), Pouran, B. (author), Gonzalez Garcia, Y. (author), Weinans, Harrie (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)

Additively manufactured (AM) topologically ordered porous metallic biomaterials with the proper biodegradation profile offer a unique combination of properties ideal for bone regeneration. These include a fully interconnected porous structure, bone-mimicking mechanical properties, and the possibility of fully regenerating bony defects. Most...

journal article 2018

document

Corrosion fatigue behavior of additively manufactured biodegradable porous iron

Li, Y. (author), Lietaert, K. (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)

The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...

journal article 2019

document

Additively manufactured biodegradable porous metals

Li, Y. (author), Jahr, H. (author), Zhou, J. (author), Zadpoor, A.A. (author)

Partially due to the unavailability of ideal bone substitutes, the treatment of large bony defects remains one of the most important challenges of orthopedic surgery. Additively manufactured (AM) biodegradable porous metals that have emerged since 2018 provide unprecedented opportunities for fulfilling the requirements of an ideal bone...

review 2020

document

Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution

Putra, N.E. (author), Mirzaali, Mohammad J. (author), Apachitei, I. (author), Zhou, J. (author), Zadpoor, A.A. (author)

The growing interest in multi-functional metallic biomaterials for bone substitutes challenges the current additive manufacturing (AM, =3D printing) technologies. It is foreseeable that advances in multi-material AM for metallic biomaterials will not only allow for complex geometrical designs, but also improve their multi-functionalities by...

review 2020

document

Additively manufactured functionally graded biodegradable porous zinc

Li, Y. (author), Pavanram, P. (author), Zhou, J. (author), Lietaert, K. (author), Bobbert, F.S.L. (author), Kubo, Yusuke (author), Leeflang, M.A. (author), Jahr, H. (author), Zadpoor, A.A. (author)

Topological design provides additively manufactured (AM) biodegradable porous metallic biomaterials with a unique opportunity to adjust their biodegradation behavior and mechanical properties, thereby satisfying the requirements for ideal bone substitutes. However, no information is available yet concerning the effect of topological design on...

journal article 2020

document

Additively manufactured biodegradable porous zinc

Li, Y. (author), Pavanram, P. (author), Zhou, J. (author), Lietaert, K. (author), Taheri, P. (author), Li, W. (author), San, H. (author), Leeflang, M.A. (author), Mol, J.M.C. (author), Jahr, H. (author), Zadpoor, A.A. (author)

Additively manufacturing (AM) opens up the possibility for biodegradable metals to possess uniquely combined characteristics that are desired for bone substitution, including bone-mimicking mechanical properties, topologically ordered porous structure, pore interconnectivity and biodegradability. Zinc is considered to be one of the promising...

journal article 2020

document

Solvent-cast 3D printing of magnesium scaffolds

Dong, J. (author), Li, Y. (author), Lin, P. (author), Leeflang, M.A. (author), van Asperen, S. (author), Yu, K. (author), Tümer, N. (author), Norder, B. (author), Zadpoor, A.A. (author), Zhou, J. (author)

Biodegradable porous magnesium (Mg) scaffolds are promising for application in the regeneration of critical-sized bone defects. Although additive manufacturing (AM) carries the promise of offering unique opportunities to fabricate porous Mg scaffolds, current attempts to apply the AM approach to fabricating Mg scaffolds have encountered some...

journal article 2020

document

Improving the Mechanical Properties of Additively Manufactured Micro-Architected Biodegradable Metals

Li, Yageng (author), Shi, Jirong (author), Jahr, H. (author), Zhou, J. (author), Zadpoor, A.A. (author), Wang, Luning (author)

Additively manufactured (AM) micro-architected biodegradable metals offer a unique combination of properties that are ideal for bone regeneration including biocompatibility, a fully interconnected porous structure, and the possibility to fully regenerate bony defects with native tissue upon biodegradation. Currently, the mechanical properties...

review 2021

document

Additively Manufactured Absorbable Porous Metal Implants: Processing, Alloying and Corrosion Behavior

Jahr, H. (author), Li, Y. (author), Zhou, J. (author), Zadpoor, A.A. (author), Schröder, AKi-Uwe (author)

Treating large bone defects is still a clinical challenge without perfect solution, mainly due to the unavailability of suitable bone implants. Additively manufactured (AM) absorbable porous metals provide unparalleled opportunities to realize the challenging requirements for bone-mimetic implants. Firstly, multi-scale geometries of such...

review 2021

document

Extrusion-based 3D printed biodegradable porous iron

Putra, N.E. (author), Leeflang, M.A. (author), Minneboo, M.B. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)

Extrusion-based 3D printing followed by debinding and sintering is a powerful approach that allows for the fabrication of porous scaffolds from materials (or material combinations) that are otherwise very challenging to process using other additive manufacturing techniques. Iron is one of the materials that have been recently shown to be...

journal article 2021

document

Extrusion-based 3D printing of ex situ-alloyed highly biodegradable MRI-friendly porous iron-manganese scaffolds

Putra, N.E. (author), Leeflang, M.A. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)

Additively manufactured biodegradable porous iron has been only very recently demonstrated. Two major limitations of such a biomaterial are very low biodegradability and incompatibility with magnetic resonance imaging (MRI). Here, we present a novel biomaterial that resolves both of those limitations. We used extrusion-based 3D printing to...

journal article 2021

document

Comparison in clinical performance of surgical guides for mandibular surgery and temporomandibular joint implants fabricated by additive manufacturing techniques

Oldhoff, M. G.E. (author), Mirzaali, Mohammad J. (author), Tümer, N. (author), Zhou, J. (author), Zadpoor, A.A. (author)

Additive manufacturing (AM) offers great design freedom that enables objects with desired unique and complex geometry and topology to be readily and cost-effectively fabricated. The overall benefits of AM are well known, such as increased material and resource efficiency, enhanced design and production flexibility, the ability to create...

journal article 2021

document

Extrusion-based 3D printed magnesium scaffolds with multifunctional MgF₂and MgF₂-CaP coatings

Dong, J. (author), Tümer, N. (author), Putra, N.E. (author), Zhu, Jia-Ning (author), Li, Y. (author), Leeflang, M.A. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zadpoor, A.A. (author), Zhou, J. (author)

Additively manufactured (AM) biodegradable magnesium (Mg) scaffolds with precisely controlled and fully interconnected porous structures offer unprecedented potential as temporary bone substitutes and for bone regeneration in critical-sized bone defects. However, current attempts to apply AM techniques, mainly powder bed fusion AM, for the...

journal article 2021

document

Preventing Antibiotic-Resistant Infections: Additively Manufactured Porous Ti6Al4V Biofunctionalized with Ag and Fe Nanoparticles

Putra, N.E. (author), Leeflang, M.A. (author), Ducret, Verena (author), Patrulea, Viorica (author), Fratila-Apachitei, E.L. (author), Perron, Karl (author), Ye, Hua (author), Zhou, J. (author), Apachitei, I. (author), Zadpoor, A.A. (author)

Implant-associated infections are highly challenging to treat, particularly with the emergence of multidrug-resistant microbials. Effective preventive action is desired to be at the implant site. Surface biofunctionalization of implants through Ag-doping has demonstrated potent antibacterial results. However, it may adversely affect bone...

journal article 2022

document

Extrusion-based additive manufacturing of Mg-Zn alloy scaffolds

Dong, J. (author), Tümer, N. (author), Leeflang, M.A. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zadpoor, A.A. (author), Zhou, J. (author)

Porous biodegradable Mg and its alloys are considered to have a great potential to serve as ideal bone substitutes. The recent progress in additive manufacturing (AM) has prompted its application to fabricate Mg scaffolds with geometrically ordered porous structures. Extrusion-based AM, followed by debinding and sintering, has been recently...

journal article 2022

document

Poly(2-ethyl-2-oxazoline) coating of additively manufactured biodegradable porous iron

Putra, N.E. (author), Tigrine, A. (author), Aksakal, S. (author), de la Rosa, V. R. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)

Additively manufacturing of porous iron offers a unique opportunity to increase its biodegradation rate by taking advantage of arbitrarily complex porous structures. Nevertheless, achieving the required biodegradation profile remains challenging due to the natural passivation of iron that decrease the biodegradation rate. Moreover, the...

journal article 2022

document

Deep learning for the rare-event rational design of 3D printed multi-material mechanical metamaterials

Pahlavani, H. (author), Amani, M. (author), Cruz Saldivar, M. (author), Zhou, J. (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)

Emerging multi-material 3D printing techniques enables the rational design of metamaterials with not only complex geometries but also arbitrary distributions of multiple materials within those geometries, yielding unique combinations of elastic properties. However, discovering the rare designs that lead to highly unusual combinations of...

journal article 2022

document

Semi-automated digital workflow to design and evaluate patient-specific mandibular reconstruction implants

van Kootwijk, A. (author), Moosabeiki, Vahid (author), Cruz Saldivar, M. (author), Pahlavani, H. (author), Leeflang, M.A. (author), Kazemivand Niar, S. (author), Tümer, N. (author), Mirzaali, Mohammad J. (author), Zhou, J. (author), Zadpoor, A.A. (author)

The reconstruction of large mandibular defects with optimal aesthetic and functional outcomes remains a major challenge for maxillofacial surgeons. The aim of this study was to design patient-specific mandibular reconstruction implants through a semi-automated digital workflow and to assess the effects of topology optimization on the...

journal article 2022

document

Additive manufacturing of bioactive and biodegradable porous iron-akermanite composites for bone regeneration

Putra, N.E. (author), Borg, K. G.N. (author), Diaz Payno, P.J. (author), Leeflang, M.A. (author), Klimopoulou, M. (author), Taheri, P. (author), Mol, J.M.C. (author), Fratila-Apachitei, E.L. (author), Zhou, J. (author), Zadpoor, A.A. (author)

Advanced additive manufacturing techniques have been recently used to tackle the two fundamental challenges of biodegradable Fe-based bone-substituting materials, namely low rate of biodegradation and insufficient bioactivity. While additively manufactured porous iron has been somewhat successful in addressing the first challenge, the limited...

journal article 2022