Searched for: %2520
(21 - 40 of 196)

Pages

document
Chen, Qinyu (author), Chang, Yaoxing (author), Kim, Kwantae (author), Gao, C. (author), Liu, Shih Chii (author)
Keyword spotting (KWS) is an important task on edge low-power audio devices. A typical edge KWS system consists of a front-end feature extractor which outputs mel-scale frequency cepstral coefficients (MFCC) features followed by a back-end neural network classifier. KWS edge designs aim for the best power-performance-area metrics. This work...
conference paper 2023
document
Guo, P. (author), Chang, Z.Y. (author), Noothout, E.C. (author), Vos, H.J. (author), Bosch, J. G. (author), de Jong, N. (author), Verweij, M.D. (author), Pertijs, M.A.P. (author)
This paper presents a pitch-matched transceiver ASIC integrated with a 2-D transducer array for a wearable ultrasound device for transfontanelle ultrasonography. The ASIC combines 8-fold multiplexing, 4-channel micro-beamforming (μ BF) and sub-array-level digitization to achieve a 128-fold channel-count reduction. The μ BF is based on passive...
conference paper 2023
document
Hummel, Thomas (author), Widhalm, Alex (author), Höpker, Jan Philipp (author), Jöns, Klaus D. (author), Chang, J. (author), Fognini, Andreas (author), Steinhauer, Stephan (author), Zwiller, Val (author), Zrenner, Artur (author), Bartley, Tim J. (author)
Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active de-latching for higher dynamic range counting or temporal filtering for pump-probe spectroscopy or LiDAR....
journal article 2023
document
Ji, W. (author), Chang, J. (author), Xu, He Xiu (author), Gao, J.R. (author), Groeblacher, S. (author), Urbach, Paul (author), Adam, A.J.L. (author)
As a two-dimensional planar material with low depth profile, a metasurface can generate non-classical phase distributions for the transmitted and reflected electromagnetic waves at its interface. Thus, it offers more flexibility to control the wave front. A traditional metasurface design process mainly adopts the forward prediction algorithm,...
review 2023
document
Chang, Chang Yu (author), Bajic, D. (author), Vila, Jean C.C. (author), Estrela, Sylvie (author), Sanchez, Alvaro (author)
Understanding the mechanisms that maintain microbial biodiversity is a critical aspiration in ecology. Past work on microbial coexistence has largely focused on species pairs, but it is unclear whether pairwise coexistence in isolation is required for coexistence in a multispecies community. To address this question, we conducted hundreds of...
journal article 2023
document
Guo, J. (author), Chang, J. (author), Yao, X. (author), Groeblacher, S. (author)
Preparing a massive mechanical resonator in a state with quantum limited motional energy provides a promising platform for studying fundamental physics with macroscopic systems and allows to realize a variety of applications, including precise sensing. While several demonstrations of such ground-state cooled systems have been achieved, in...
journal article 2023
document
He, S. (author), Mustafa, S. (author), Chang, Z. (author), Liang, M. (author), Schlangen, E. (author), Lukovic, M. (author)
In the current study, experiments and numerical simulations were carried out to investigate the cracking behavior of reinforced concrete beams consisting of a very thin layer (i.e., 1 cm in thickness) of SHCC in the concrete cover, tension zone. A novel type of SHCC/concrete interface that features a weakened chemical adhesion but an enhanced...
journal article 2023
document
Schildkamp, R.R.M. (author), Chang, J. (author), Sodja, J. (author), De Breuker, R. (author), Wang, Xuerui (author)
This paper proposes an incremental nonlinear control method for an aeroelastic system’s gust load alleviation and active flutter suppression. These two control objectives can be achieved without modifying the control architecture or the control parameters. The proposed method has guaranteed stability in the Lyapunov sense and also has...
journal article 2023
document
Chang, Z. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Herein, different kinds of methods for buildability quantification of 3D concrete printing are reviewed, including experimental approaches, analytical modelling, and numerical simulations. A brief introduction on printing process is first given. This discusses the material properties in different stages. Material printability, which...
journal article 2023
document
Sayadi, Sina (author), Chang, Z. (author), He, S. (author), Schlangen, E. (author), Mihai, I.C. (author), Jefferson, Anthony (author)
This paper describes the development of a discrete lattice model for simulating structures formed from self-healing cementitious materials. In particular, a new approach is presented for simulating time dependent mechanical healing in lattice elements. The proposed formulation is designed to simulate the transient damage and healing behaviour...
journal article 2023
document
Chang, Guobin (author), Qian, N. (author), Bian, Shaofeng (author)
Point-mass inversion is widely employed in GRACE level-2 data processing. Conventionally, the spherical harmonic (SH) coefficients are used indirectly: a set of pseudo measurements is generated first using the SH coefficients through SH synthesis; then the point-mass inversion is done with these pseudo measurements. To be statistically optimal,...
journal article 2023
document
Xiao, Yue (author), Mr. Wu, R.W. (author), Chang, Xi Wen (author), Liu, X. (author), Leng, Zhen (author)
Polycyclic Aromatic Hydrocarbons (PAHs) in asphalt materials is a type of serious environmental hazard, and the main pollution resource in road engineering. Aiming at the requirement of PAHs rapid detection method in asphalt pavement construction for low environmental hazard, this research concentrated in experiments about PAHs content,...
journal article 2023
document
Wan, Z. (author), Chang, Z. (author), Xu, Y. (author), Šavija, B. (author)
In this paper, optimization of vascular structure of self-healing concrete is performed with deep neural network (DNN). An input representation method is proposed to effectively represent the concrete beams with 6 round pores in the middle span as well as benefit the optimization process. To investigate the feasibility of using DNN for...
journal article 2023
document
Liang, M. (author), Liu, C. (author), Liang, X. (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)
This paper investigates the influence of temperature on autogenous deformation and early-age stress (EAS) evolution in ordinary Portland cement paste using a recently developed Mini Temperature Stress Testing Machine (Mini-TSTM) and Mini Autogenous Deformation Testing Machine (Mini-ADTM). In the Mini-TSTM/ ADTM, CEM I 42.5 N paste with a...
journal article 2023
document
Qiu, Xiujiao (author), Chang, Z. (author), Chen, J. (author), Schlangen, E. (author), Ye, G. (author), Schutter, Geert De (author)
In our former paper, based on a published 3D reactive transport model at microscale with the capability of simulating the chemical reactions involved in ASR, the location of expansive ASR gel related to the reactivity of aggregate, temperature, aggregate porosity and silica content in aggregate, is clarified. Based on the simulation results,...
journal article 2023
document
Chang, J. (author), Esmaeil Zadeh, I.Z. (author)
journal article 2023
document
Liang, M. (author), Chang, Z. (author), Zhang, Y. (author), Cheng, H. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)
This study aims to experimentally investigate the autogenous deformation and the stress evolution in restrained high-volume ground granulated blast furnace slag (GGBFS) concrete. The Temperature Stress Testing Machine (TSTM) and Autogenous Deformation Testing Machine (ADTM) were used to study the macro-scale autogenous deformation and stress...
journal article 2023
document
Chang, Xiwen (author), Long, Yongshuang (author), Wang, C. (author), Xiao, Yue (author)
Asphalt material is an irreplaceable material in road construction. However, it releases VOCs (Volatile Organic Compounds), which do cause pollution to the surrounding environment, during its full life cycle, especially in high-temperature paving stage and summer service time. Asphalt VOCs release mechanism and effective emission reduction...
journal article 2023
document
Chang, Z. (author), Liang, M. (author), Xu, Y. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)
In this study, an experimental setup to characterize the early-age creep of 3D printable mortar was proposed. The testing protocol comprises quasi-static compressive loading-unloading cycles, with 180-s holding periods in between. An analytical model based on a double power law was used to predict creep compliance with hardening time and...
journal article 2023
document
Chang, J. (author), Gao, Jun (author), Esmaeil Zadeh, I.Z. (author), Elshaari, Ali W. (author), Zwiller, Val (author)
At the core of quantum photonic information processing and sensing, two major building pillars are single-photon emitters and single-photon detectors. In this review, we systematically summarize the working theory, material platform, fabrication process, and game-changing applications enabled by state-of-the-art quantum dots in nanowire...
review 2023
Searched for: %2520
(21 - 40 of 196)

Pages