Searched for: %2520
(61 - 80 of 122)

Pages

document
Han, C. (author), Zhao, Y. (author), Mazzarella, L. (author), Santbergen, R. (author), Bento Montes, A.R. (author), Procel Moya, P.A. (author), Yang, G. (author), Zhang, Xiaodan (author), Zeman, M. (author), Isabella, O. (author)
The window layers limit the performance of silicon heterojunction (SHJ) solar cells with front and back contacts. Here, we optimized tungsten-doped indium oxide (IWO) film deposited by radio frequency magnetron sputtering at room temperature. The opto-electrical properties of the IWO were manipulated when deposited on top of thin-film silicon...
journal article 2021
document
Calcabrini, A. (author), Weegink, Raoul (author), Manganiello, P. (author), Zeman, M. (author), Isabella, O. (author)
Urban environments present a great potential to generate electricity with photovoltaic technology. However, this electricity cannot be fully harvested using conventional solar modules that have been designed for open landscapes. In urban environments, photovoltaic modules can often be subject to partial shading caused by trees and building...
journal article 2021
document
Calcabrini, A. (author), Muttillo, M. (author), Weegink, Raoul (author), Manganiello, P. (author), Zeman, M. (author), Isabella, O. (author)
Photovoltaic modules in the urban environment are very often exposed to uneven illumination conditions. The electrical interconnection between solar cells in a photovoltaic module limits the power that a solar module can generate under partial shading conditions. In this article, we introduce a PV module that is able to dynamically reconfigure...
journal article 2021
document
Procel Moya, P.A. (author), Xu, Haiyuan (author), Saez, Aurora (author), Ruiz Tobon, C.M. (author), Mazzarella, L. (author), Zhao, Y. (author), Han, C. (author), Yang, G. (author), Zeman, M. (author), Isabella, O. (author)
The contact resistivity is a key parameter to reach high conversion efficiency in solar cells, especially in architectures based on the so-called carrier-selective contacts. The importance of contact resistivity relies on the evaluation of the quality of charge collection from the absorber bulk through adjacent electrodes. The electrode...
journal article 2020
document
Zhao, Y. (author), Mazzarella, L. (author), Procel Moya, P.A. (author), Han, C. (author), Yang, G. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Hydrogenated nanocrystalline silicon oxide (nc-SiO<sub>x</sub>:H) layers exhibit promising optoelectrical properties for carrier-selective-contacts in silicon heterojunction (SHJ) solar cells. However, achieving high conductivity while preserving crystalline silicon (c-Si) passivation quality is technologically challenging for growing thin...
journal article 2020
document
Limodio, G. (author), Yang, G. (author), De Groot, Yvar (author), Procel, Paul (author), Mazzarella, L. (author), Weber, Arthur W. (author), Isabella, O. (author), Zeman, M. (author)
In this work, we develop SiO<sub>x</sub>/poly-Si carrier-selective contacts grown by low-pressure chemical vapor deposition and boron or phosphorus doped by ion implantation. We investigate their passivation properties on symmetric structures while varying the thickness of poly-Si in a wide range (20-250 nm). Dose and energy of implantation...
journal article 2020
document
Bento Montes, A.R. (author), Eijt, S.W.H. (author), Tian, Y. (author), Gram, R. (author), Schut, H. (author), Suemasu, T. (author), Usami, N. (author), Zeman, M. (author), Serra, J. (author), Isabella, O. (author)
Barium di-silicide (BaSi<sub>2</sub>) is a very promising absorber material for high-efficiency thin-film solar cells, due to its suitable bandgap, high light absorption coefficient, and long minority-carrier lifetime. In this study, we compare the nanostructure, layer composition, and point defects of BaSi<sub>2</sub> thin films deposited by...
journal article 2020
document
Singh, M. (author), Santbergen, R. (author), Mazzarella, L. (author), Madrampazakis, A. (author), Yang, G. (author), Vismara, R. (author), Remes, Z. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
The optical modelling for optimizing high-efficiency c-Si solar cells endowed with poly-SiO<sub>x</sub> or poly-SiC<sub>x</sub> carrier-selective passivating contacts (CSPCs) demands a thorough understanding of their optical properties, especially their absorption coefficient. Due to the mixed phase nature of these CSPCs, spectroscopic...
journal article 2020
document
Rezaei, N. (author), Procel Moya, P.A. (author), Simor, Marcel (author), Vroon, Zeger (author), Zeman, M. (author), Isabella, O. (author)
An interdigitated back-contacted (IBC) configuration is proposed for submicron copper indium gallium (di)selenide (CIGS). In a modelling platform, the structure was opto-electrically optimized for maximum efficiency. The results are compared with a reference front/back-contacted (FBC) solar cell with similar absorber thickness and exhibiting...
journal article 2020
document
Ziar, H. (author), Prudon, Bjorn (author), Lin, Fen Yu (author), Stark, Tim (author), Teurlincx, Sven (author), Goma, Elias Garcia (author), Alavez, Ignacio Narvaez (author), Santbergen, R. (author), Isabella, O. (author)
Photovoltaic (PV) technology has the potential to be integrated on many surfaces in various environments, even on water. Modeling, design, and realization of a floating PV system have more challenges than conventional rooftop or freestanding PV system. In this work, we introduce two innovative concepts for floating bifacial PV systems,...
journal article 2020
document
Tian, Y. (author), Bento Montes, A.R. (author), Vančo, Ľubomír (author), Čaplovičová, Mária (author), Vogrinčič, Peter (author), Šutta, Pavol (author), Satrapinskyy, Leonid (author), Zeman, M. (author), Isabella, O. (author)
The knowledge of the structural and compositional details of Si/BaSi<sub>2</sub>/Si heterostructure annealed at high temperature is a prerequisite for BaSi<sub>2</sub> application in heterojunction thin-film solar cells. For this purpose, Si/BaSi<sub>2</sub>/Si heterostructures deposited by magnetron sputtering with different Si layer...
journal article 2020
document
de Vries, Tim N.C. (author), Bronkhorst, Joris (author), Vermeer, Martijn (author), Donker, Jaap C.B. (author), Briels, Sven A. (author), Ziar, H. (author), Zeman, M. (author), Isabella, O. (author)
A quick-scan yield prediction method has been developed to assess rooftop photovoltaic (PV) potential. The method has three main parts. For each roof, first (i) virtual 3D roof segments were reconstructed using aerial imagery, then, (ii) PV modules were automatically fitted onto roof segments using a fitting algorithm and finally, (iii) expected...
journal article 2020
document
Scire, D. (author), Procel Moya, P.A. (author), Gulino, Antonino (author), Isabella, O. (author), Zeman, M. (author), Crupi, Isodiana (author)
The application of molybdenum oxide in the photovoltaic field is gaining traction as this material can be deployed in doping-free heterojunction solar cells in the role of hole selective contact. For modeling-based optimization of such contact, knowledge of the molybdenum oxide defect density of states (DOS) is crucial. In this paper, we...
journal article 2020
document
Pomaska, Manuel (author), Köhler, Malte (author), Procel Moya, P.A. (author), Zamchiy, Alexandr (author), Singh, Aryak (author), Kim, Do Yun (author), Isabella, O. (author), Zeman, M. (author), Li, Shenghao (author)
N-type microcrystalline silicon carbide (μc-SiC:H(n)) is a wide bandgap material that is very promising for the use on the front side of crystalline silicon (c-Si) solar cells. It offers a high optical transparency and a suitable refractive index that reduces parasitic absorption and reflection losses, respectively. In this work, we...
journal article 2020
document
Han, C. (author), Yang, G. (author), Montes, Ana (author), Procel Moya, P.A. (author), Mazzarella, L. (author), Zhao, Y. (author), Eijt, S.W.H. (author), Schut, H. (author), Zhang, Xiaodan (author), Zeman, M. (author), Isabella, O. (author)
In high-efficiency silicon solar cells featuring carrier-selective passivating contacts based on ultrathin SiOx/poly-Si, the appropriate implementation of transparent conductive oxide (TCO) layers is of vital importance. Considerable deterioration in passivation quality occurs for thin poly-Si-based devices owing to the sputtering damage...
journal article 2020
document
Mazzarella, L. (author), Alcañiz Moya, A. (author), Procel Moya, P.A. (author), Kawa, Eliora (author), Zhao, Y. (author), Tiringer, U. (author), Han, C. (author), Yang, G. (author), Taheri, P. (author), Zeman, M. (author), Isabella, O. (author)
Molybdenum oxide (MoO<sub>x</sub>) is attractive for applications as hole-selective contact in silicon heterojunction solar cells for its transparency and relatively high work function. However, the integration of MoO<sub>x</sub> stacked on intrinsic amorphous silicon (i)a-Si:H layer usually exhibits some issues that are still not fully...
journal article 2020
document
Chandra Mouli, G.R. (author), van Duijsen, P.J. (author), Grazian, F. (author), Jamodkar, Ajay (author), Bauer, P. (author), Isabella, O. (author)
If electric vehicles have to be truly sustainable, it is essential to charge them from sustainable sources of electricity, such as solar or wind energy. In this paper, the design of solar powered e-bike charging station that provides AC, DC and wireless charging of e-bikes is investigated. The charging station has integrated battery storage...
journal article 2020
document
Ortiz Lizcano, J.C. (author), Haghighi, Z. (author), Wapperom, Sander (author), Infante Ferreira, C.A. (author), Isabella, O. (author), van den Dobbelsteen, A.A.J.F. (author), Zeman, M. (author)
This work presents the concept of a photovoltaic (PV)-powered solar chimney. We modeled and experimentally studied the integration of a PV system within a naturally ventilated façade (NVF), attempting to use the inherent cavity as a ventilation channel to transfer heat. Thermodynamic models were created to study the thermal and, therefore,...
journal article 2019
document
Ahmadpanahi, S.H. (author), El Gawhary, O. (author), Vismara, R. (author), Isabella, O. (author), Zeman, M. (author)
Periodic texturing is one of the main techniques to enhance light absorption in thin-film solar cells. The presence of periodicity, such as grating, allows the excitation of guided modes in the structure, thus enhancing absorption. However, grating efficiency in exciting guided modes is highly dependent on the wavelength and incident angle of...
journal article 2019
document
Ahmadpanahi, S.H. (author), Vismara, R. (author), Isabella, O. (author), Zeman, M. (author)
Surface texturing is one of the main techniques to enhance light absorption in solar cells. In thin film devices, periodic texturing can be used to excite the guided resonances supported by the structure. Therefore, total absorption is enhanced largely due to the excitation of these resonances. Although the maximum absorption enhancement...
journal article 2019
Searched for: %2520
(61 - 80 of 122)

Pages