- document
-
Wenink, Robert (author)Surrogate modelling techniques such as Kriging are a popular means for cheaply emulating the response of expensive Computational Fluid Dynamics simulations. These surrogate models are often used for exploring a parameterised design space and identifying optimal designs. Multi-fidelity Kriging extends the methodology to incorporate data of...master thesis 2023
- document
-
Waling, Loulotte (author)In recent years, biotechnological processes have gained increased interest due to their potential for high-value compound production and waste recycling. This shift towards biotechnology is driven by global challenges such as food security, climate change, and the transition to renewable resources. To address the limitations of large-scale...master thesis 2023
- document
-
van Heest, Martijn (author)Placed block revetments on dikes are used for the protection of the structure against wave loading. The dimensions of the revetment are determined with empirical relations and design tools. The stability of the design solution needs to be checked by physical flume tests to ensure the safety of the structure. However, these tests can be costly...master thesis 2023
- document
-
Rengarajan, Sudharsan Bharatwaj (author)The hunt for new methods to harness wind energy is at an all-time high as wind energy quickly overtakes other renewable energy sources. Deep waters are promising alternatives with higher average wind speed (thus, higher yields) and also due to lesser availability of land on shore. Even though the design of the blades and rotor of a FOWT is...master thesis 2023
- document
-
Spyridonos, George (author)Due to its immense potential to harvest larger amounts of energy from the wind at a higher capacity factor, offshore wind energy is the key to reach the goal of a more sustainable future. The wind energy research community has been focusing all its efforts to bring the new concept of floating offshore wind turbines (FOWT) into the market. By...master thesis 2023
- document
-
Kaniewski, Tadeusz (author)The computational cost of high-fidelity engineering simulations, for example CFD, is prohibitive if the application requires frequent design iterations or even fully fledged optimization. A popular way to reduce the computational cost and enable fast iteration cycles is to use surrogate models that are trained to predict simulation results from...master thesis 2023
- document
-
Lokken, Thomas (author)With an increased demand for renewable energy wind farms, their efficiency receives growing attention from both the industry and academics. Mitigating wake interaction effects in wind farms is one of the ways wind farms could increase their efficiency. Control techniques to increase wake reenergizing are currently under development, however, are...master thesis 2023
- document
-
Bianchi, Francesco (author)In this report a master thesis work in support to the development of a water-based Vaporizing Liquid Microthruster (VLM) is presented. This device, which makes use of MEMS technology to offer a very high degree of miniaturization, is an extremely compact thruster which achieves an important performance (Isp > 100 s [64]) while utilizing water...master thesis 2023
- document
-
van Luijk, Nikki (author)The Flying V is a flying wing aircraft consisting of two pressurised passenger cabins placed in a V shape. Its longitudinal and lateral control is ensured via elevons and split flaps on the outboard wing, and rudders on the tip-mounted winglets. The goal of this study is to devise a design for the outboard wing of the Flying V through a...master thesis 2023
- document
-
Tallapragada, Bharadwaj (author)A popular class of methods for solving Fluid-Structure Interactions (FSI) problems computationally are the moving mesh deformation methods. These methods generally involve deforming the fluid domain so that it conforms to the structure as it undergoes changes. An efficient and robust moving mesh technique involves interpolation of displacements...master thesis 2023
- document
-
Trotta, Luca (author)High-frequency combustion instabilities represent the main technical risk faced by design engineers when developing new chemical rocket propulsion systems. Such instabilities are driven by the coupling between the flames’ heat release rate and the combustion chamber’s acoustic field. As such, they can only be assessed during detailed design...master thesis 2023
- document
-
Lovato, S. (author)The increasing size of today's ships is a major concern for navigation in confined waters. In order to ensure safe manoeuvres, port authorities prescribe, among others, a minimum under-keel clearance that must be maintained by the ships during navigation. However, the seabed of ports situated at the estuaries or along rivers is often covered by...doctoral thesis 2023
- document
-
van der Made, Daan (author)In this thesis, the influence of a combined drift angle, heeling angle and forward speed on the stability of a tug is researched. This is done to gain insight in the stability of tugs during escorting, where they operate at high drift angles, heeling angles and forward speed. The Damen RSD 2513 tug was simulated in steady CFD simulation using...master thesis 2023
- document
-
Eijsberg, Daan (author)Fermentation processes are considered to be essential to decrease our reliance on fossil fuel based products. However, the scale-up from lab-scale to industrial-scale has proven to be difficult. Computational Fluid Dynamics (CFD) has the potential to be a tool to optimize the scale-up and to help engineers understand the relevant hydrodynamics...master thesis 2023
- document
-
Martorelli, Luca (author)The use of CFD-based optimizations is becoming a standard for turbomachinery design. Although the use of such optimizations can lead to great improvements of the machine performances, there are still several shortcomings in the common design procedure of turbomachines. In fact, this entails the optimization of the component shape, and only a...master thesis 2023
- document
-
Perinajová, R. (author), van Ooij, Pim (author), Kenjeres, S. (author)A long-time exposure to lack of oxygen (hypoxia) in some regions of the cerebrovascular system is believed to be one of the causes of cerebral neurological diseases. In the present study, we show how a combination of magnetic resonance imaging (MRI) and computational fluid dynamics (CFD) can provide a noninvasive alternative for studying...journal article 2023
- document
-
Başkaya, A.O. (author), Hickel, S. (author)A conservative cut-cell immersed boundary (IB) method including gas-surface interactions (GSI) for the simulation of atmospheric entry flows under thermochemical nonequilibrium (TCNE) conditions is presented. The performance<br/>of the method is demonstrated for three test cases: a compression ramp, a cylinder, and a plasma wind tunnel ablator...conference paper 2023
- document
-
Dutta, Debasish (author), Afzal, Mohammad Saud (author), Alhaddad, S.M.S. (author)This study utilizes three-dimensional simulations to investigate scour in combined wave–current flows around rectangular piles with various aspect ratios. The simulation model solves the Reynolds-averaged Navier–Stokes (RANS) equations using the k–ω turbulence model, and couples the Exner equation to compute bed elevation changes. The model also...journal article 2023
- document
-
Hobeika, N. (author), Garcia Sanchez, C. (author), Bluyssen, P.M. (author)The corona pandemic accelerated a lot of studies about aerosol dispersion and different aerosol-generating tasks ranging in intensity from sneezing to breathing. Both measurements and numerical simulations were used to understand the behaviour of aerosols. For numerical simulations, Computational Fluid Dynamic (CFD) simulations were used;...conference paper 2023
- document
-
Raghavan, V. (author), Simonetti, Irene (author), Lavidas, G. (author), Metrikine, A. (author), Cappietti, Lorenzo (author)Utilization of Boundary Element Method (BEM) based on linear potential flow for modelling Oscillating Water Column (OWC) devices has gained popularity in the last two decades. The commercial BEM solver WAMIT has been used widely for modelling OWCs and validated using experimental modelling (Delauré et. al. 2003, Bingham et. al. 2015, Faÿ 2020)....conference paper 2023