- document
-
Chang, J. (author), Guo, Zongyi (author), De Breuker, R. (author), Wang, Xuerui (author)The sensor-based Incremental Nonlinear Dynamic Inversion (INDI) control has shown promising robustness in the aerospace research field. This control framework only requires a partial knowledge of plant (control effectiveness) because of its usage of angular accelerations and actuator output measurements. However, there are still un-negligible...journal article 2022
- document
-
Chen, Y. (author), Chang, Z. (author), He, S. (author), Copuroglu, Oguzhan (author), Šavija, B. (author), Schlangen, E. (author)A good bond between the layers of 3D printed cementitious materials is a prerequisite for having high structural rigidity for the printed elements. However, the influence of printing process on an interlayer bond is still not well understood. This study investigates the influence of curing methods (i.e., air curing, plastic film covering, wet...journal article 2022
- document
-
Schildkamp, R.R.M. (author), Wang, Xuerui (author), Chang, J. (author), De Breuker, R. (author), Sodja, J. (author)This paper presents the development and initial characterization of an active, para- metric wing section with aileron and spoiler control surfaces. This wing section is intended to replace the currently used passive wing section setup and facilitate research in active con- trol techniques of aeroelastic phenomena such as flutter, gust load...conference paper 2022
- document
-
Schildkamp, R.R.M. (author), Chang, J. (author), Sodja, J. (author), De Breuker, R. (author), Wang, Xuerui (author)This paper proposes an incremental nonlinear control method for aeroelastic sys- tem gust load alleviation and active flutter suppression. These two control objectives can be achieved without modifying the control architecture or the control parameters. The proposed method has guaranteed stability in the Lyapunov sense and also has robustness...conference paper 2022
- document
-
Chang, Haoliang (author), Li, L. (author), Huang, Jianxiang (author), Zhang, Qingpeng (author), Chin, Kwai Sang (author)Traffic congestion and accidents take a toll on commuters' daily experiences and society. Locating the venues prone to congestion and accidents and capturing their perception by public members is invaluable for transport policy-makers. However, few previous methods consider user perception toward the accidents and congestion in finding and...journal article 2022
- document
-
Liang, M. (author), Chang, Z. (author), He, S. (author), Chen, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)Early-age stress (EAS) is an important index for evaluating the early-age cracking risk of concrete. This paper encompasses a thermo-chemo-mechanical (TCM) model and active ensemble learning (AEL) for predicting the EAS evolution. The TCM model provides the data for the AEL model. First, based on Fourier's law, Arrhenius’ equation, and rate...journal article 2022
- document
-
Jia, Jinhao (author), Li, Cong (author), Chen, Qiang (author), Bai, Shuxin (author), Chang, J. (author), Xiong, Degan (author), Gao, Mingqi (author), Li, Shun (author), Xiao, Jin (author)3D C<sub>f</sub>/SiC–Al composites were achieved through the pressure infiltration of liquid Al–Si alloy into porous 3D C<sub>f</sub>/SiC preform, which was produced by different cycles of precursor infiltration and pyrolysis. The effect of silicon carbide volume fraction on the microstructure, anisotropic mechanical response, and...journal article 2022
- document
-
Hopf, Y.M. (author), Ossenkoppele, B.W. (author), Noothout, E.C. (author), Chang, Z.Y. (author), Chen, C. (author), Vos, H.J. (author), Verweij, M.D. (author), de Jong, N. (author), Pertijs, M.A.P. (author)This work describes an ASIC design for high-frame-rate 3D intracardiac echocardiography probes. The chip is the first to combine element-level high-voltage pulsers and time-gain-compensation analog frontends as well as subarray beamformers and in-probe digitization in a pitch-matched fashion. The integration challenge is met by a shared hybrid...poster 2022
- document
-
Hopf, Y.M. (author), Ossenkoppele, B.W. (author), Soozande, M. (author), Noothout, E.C. (author), Chang, Z.Y. (author), Vos, H.J. (author), Bosch, Johan G. (author), Verweij, M.D. (author), de Jong, N. (author), Pertijs, M.A.P. (author)In this letter, a compact high-voltage (HV) transmit circuit for dense 2-D transducer arrays used in 3-D ultrasonic imaging systems is presented. Stringent area requirements are addressed by a unipolar pulser with embedded transmit/receive switch. Combined with a capacitive HV level shifter, it forms the ultrasonic HV...journal article 2022
- document
-
Liang, M. (author), Chang, Z. (author), Wan, Z. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)This study aims to provide an efficient and accurate machine learning (ML) approach for predicting the creep behavior of concrete. Three ensemble machine learning (EML) models are selected in this study: Random Forest (RF), Extreme Gradient Boosting Machine (XGBoost) and Light Gradient Boosting Machine (LGBM). Firstly, the creep data in...journal article 2022
- document
-
Liang, M. (author), Gan, Y. (author), Chang, Z. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)This study aims to provide an efficient alternative for predicting creep modulus of cement paste based on Deep Convolutional Neural Network (DCNN). First, a microscale lattice model for short-term creep is adopted to build a database that contains 18,920 samples. Then, 3 DCNNs with different consecutive convolutional layers are built to learn...journal article 2022
- document
-
Chang, J. (author), De Breuker, R. (author), Wang, Xuerui (author)Incremental control, including incremental nonlinear dynamic inversion (INDI) and incremental backstepping (IBS), is a sensor-based control framework that enhances the control robustness by exploiting sensor measurements. Although its effectiveness has been demonstrated on various aerospace systems, the explicit and quantifiable expression for...conference paper 2022
- document
-
Xin, Jianjian (author), Shi, Fulong (author), Fan, Shi (author), Jin, Qiu (author), Chang, X. (author)The water impact of one and twin free-falling wedges is numerically investigated by a Cartesian grid multiphase flow model. The effects of the drop velocity and the gap distance on the hydrodynamic behaviors are parametrically investigated. The numerical model involves a radial basis function ghost cell method (RBFGCM) for treating moving...journal article 2022
- document
-
Chang, Z. (author), Wan, Z. (author), Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)Extrusion-based 3D concrete printing (3DCP) results in deposited materials with complex microstructures that have high porosity and distinct anisotropy. Due to the material heterogeneity and rapid growth of cracks, fracture analysis in these air-void structures is often complex, resulting in a high computational cost. This study proposes a...journal article 2022
- document
- Chang, J. (author), De Breuker, R. (author), Wang, Xuerui (author) journal article 2022
- document
-
Chang, Weiwei (author), Li, Yangyang (author), Li, Z. (author), Lou, Yuntian (author), Cui, Tianyu (author), Qian, Hongchang (author), Mol, J.M.C. (author), Zhang, Dawei (author)The microbiologically influenced corrosion of pure iron was investigated in the presence of Shewanella oneidensis MR-1 with various levels of exogenous riboflavin (RF) serving as electron shuttles for extracellular electron transfer (EET). With more RF available, a larger and denser phosphate layer was formed on the surface of pure iron by...journal article 2022
- document
-
Chang, Z. (author), Zhang, Hongzhi (author), Liang, M. (author), Schlangen, E. (author), Šavija, B. (author)This paper explores buildability quantification of randomly meshed 3D printed concrete objects by considering structural failure by elastic buckling. The newly proposed model considers the most relevant printing parameters, including time-dependent material behaviors, printing velocity, localized damage and influence of sequential printing...journal article 2022
- document
-
Xu, Y. (author), Gan, Y. (author), Chang, Z. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)Tailoring lattice structures is a commonly used method to develop lattice materials with desired mechanical properties. However, for cementitious lattice materials, besides the macroscopic lattice structure, the multi-phase microstructure of cement paste may have substantial impact on the mechanical responses. Therefore, this work proposes a...journal article 2022
- document
-
Hopf, Y.M. (author), Ossenkoppele, Boudewine W. (author), Soozande, Mehdi (author), Noothout, E.C. (author), Chang, Z.Y. (author), Chen, Chao (author), Vos, H.J. (author), Bosch, Johan G. (author), Verweij, M.D. (author), de Jong, N. (author), Pertijs, M.A.P. (author)In this article, an application-specific integrated circuit (ASIC) for 3-D, high-frame-rate ultrasound imaging probes is presented. The design is the first to combine element-level, high-voltage (HV) transmitters and analog front-ends, subarray beamforming, and in-probe digitization in a scalable fashion for catheter-based probes. The...journal article 2022
- document
-
Hu, F. (author), van Leijen, F.J. (author), Chang, L. (author), Wu, Jicang (author), Hanssen, R.F. (author)Synthetic aperture radar (SAR) missions with short repeat times enable opportunities for near real-time deformation monitoring. Traditional multitemporal interferometric SAR (MT-InSAR) is able to monitor long-term and periodic deformation with high precision by time-series analysis. However, as time series lengthen, it is time-consuming to...journal article 2022