Microstructure evolution and micromechanical behavior of solvent-modified Cu–Ag composite sintered joints for power electronics packaging at high temperatures

With the increased deployment of power modules in demanding conditions, sintering materials, especially composite sintering materials, have raised growing interest due to their cost-effectiveness and suitability. Therefore, this study explores the viability of Cu–Ag composite sintering material, focusing on solvent influence through...

Effect of epoxy resin addition on properties and corrosion behavior of sintered joints in power modules serviced offshore

Power modules applied in offshore applications are facing risks of corrosion failures on die-attach materials due to high humidity and H₂S exposure. To investigate such corrosion behavior for sintered die-attach materials, we conducted a study with four groups of samples fabricated using copper and silver metal particles under...

Conductive Co-based metal organic framework nanostructures for excellent potassium- and lithium-ion storage: Kinetics and mechanism studies

Thanks to the low cost and earth's abundant potassium resources, potassium ion batteries (PIBs) have attracted much interest as alternative energy storage devices. However, there is still a great challenge to develop suitable anode materials for PIBs with high specific capacity, fast charge/discharge and stable ion storage. Nowadays,...

The continuous swelling-degradation behaviors and chemo-rheological properties of waste crumb rubber modified bitumen considering the effect of rubber size

The chemo-rheological properties of crumb rubber modified bitumen are always unstable due to the mutable and uncontrollable swelling-degradation degree of crumb rubber in bitumen matrix. The study aimed at exploring the continuous swelling and degradation behaviors of crumb rubber modified bitumen (CRMB) considering the influence of rubber size...

Evaluation of rheological behaviors and anti-aging properties of recycled asphalts using low-viscosity asphalt and polymers

Recycling technology is widely used in the asphalt road construction due to its environmental and economic effects. Many efforts have focused on the performance restoration of aged base asphalt by adding light oil, but the possibility of recycling the aged asphalt using low-viscosity asphalt and polymers has been few explored. Therefore, the...

Indentation hardness, plasticity and initial creep properties of nanosilver sintered joint

The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...

Effects of sintering pressure on the densification and mechanical properties of nanosilver double side sintered power module

Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...

Stress analysis of pressure-assisted sintering for the double-side assembly of power module

Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...

Rheological properties, compatibility, and storage stability of SBS latex-modified asphalt

A styrene-butadiene-styrene (SBS) latex modifier can be used for asphalt modification due to the fact of its energy-saving, construction convenience, and economic advantages. The objective of this study was to investigate the influence of asphalt type and SBS latex dosage on the rheological properties, compatibility, and storage stability of...

Effect of Sintering Pressure on the Porosity and the Shear Strength of the Pressure-Assisted Silver Sintering Bonding

The microstructure, thickness, porosity, and shear performance of the silver (Ag) sintering layers under different sintering pressures were investigated. Experimental results demonstrated that the thickness and the porosity of the sintering layer decreased when the sintering pressure varied from 5 MPa to 30 MPa. This densification phenomenon...

A new hermetic sealing method for ceramic package using nanosilver sintering technology

High reliable packaging materials are needed for electronics when they work at harsh environments. Among which, the nanosilver material has been widely studied and applied in power electronics due to its low processing temperature and high reliability. This paper investigates the bonding properties of nanosilver sintered hermetic cavity. There...