Detection of Rail Surface Defects based on Axle Box Acceleration Measurements: A Measurement Campaign in Sweden

This work presents the results of a measurement campaign to demonstrate the effectiveness of the axle box acceleration (ABA) technology for detecting rail defects. The measurements were conducted along the Iron Ore line between Sweden and Norway for the IN2TRACK3 project. This line is mostly single-track with passenger-freight mixed traffic and...

Condition monitoring of railway transition zones using acceleration measurements on multiple axle boxes: Case studies in the Netherlands, Sweden, and Norway

Railway transition zones connecting conventional embankments and rigid struc-tures, such as bridges and tunnels, usually degrade much faster than other railway sections. Efficient health condition monitoring of transition zones is important for preventative track maintenance. In this paper, a methodology for monitoring rail-way transition zones...

A multiple spiking neural network architecture based on fuzzy intervals for anomaly detection: a case study of rail defects

In this paper, a fuzzy interval-based method is proposed for solving the problem of rail defect detection relying on an on-board measurement system and a multiple spiking neural network architecture. Instead of outputting binary values (defect or not defect), all data will belong to both classes with different spreads that are given by two fuzzy...

An experimental study on the effects of friction modifiers on wheel–rail dynamic interactions with various angles of attack

By modifying friction to the desired level, the application of friction modifiers (FMs) has been considered as a promising emerging tool in the railway engineering for increasing braking/traction force in poor adhesion conditions and mitigating wheel/rail interface deterioration, energy consumption, vibration and noise. Understanding the...

Design, calibration and validation of a wheel-rail contact force measurement system in V-Track

An innovative downscale test rig called V-Track has been constructed for wheel-rail contact experiments under impact loading conditions. In this paper, a force measurement system termed a dynamometer was developed in V-Track to measure the wheel-rail contact forces. The dynamometer consists of four 3-component piezoelectric force sensors and...

Smart technology solutions for the NeTIRail-INFRA case study lines: Axle box acceleration and ultra-low cost smartphones

In this paper, we present preliminary results on the development of smart technology solutions for lower density railway lines. The goal is to reach a cost effective inspection and asset management to minimize maintenance<br/>interventions time/cost without dedicated inspection vehicles. The proposed methods include axle box acceleration...

Smart technology solutions for the NeTIRail-INFRA case study lines: Axle box acceleration and ultra-low cost smartphones

Results on the development of smart technology solutions for lower density<br/>railway lines are presented. The goal is to reach a cost effective inspection and<br/>asset management to minimize maintenance interventions time/cost without<br/>dedicated inspection vehicles. The proposed methods in this paper include: 1) axle box acceleration...

Rail Condition Monitoring using Axle Box Acceleration Measurements: Defect detection in the Netherlands and Romania

In this paper we discuss rail condition monitoring based on axle box acceleration (ABA) measurements. We present three case studies. The first one in The Netherlands, the detection of local defects with different severity levels (squat A, squat B and squat C) is analysed. The second case from the Faurei testing ring in Romania, the detection of...

A condition-based maintenance methodology for rails in regional railway networks using evolutionary multiobjective optimization: Case study line Braşov to Zărneşti in Romania

In this paper, we propose a methodology based on signal processing and evolutionary multiobjective optimization to facilitate the maintenance decision making of infra-managers in regional railways. Using a train in operation (with passengers onboard), we capture the condition of the rails using Axle Box Acceleration measurements. Then, using...

A 3D finite element modeling of hammer test for track parameter identification

In railway tracks, short wave rail surface defects give rise to high wheel-rail dynamic forces and noise. Having a better insight into short wave defect occurrence could lead to development of adapted maintenance methods or track design to delay or avoid defect, so that the high short wave defect related maintenance costs may be reduced. As part...

Cracking in asphalt concrete

Fatigue resistance of asphalt concrete is usually evaluated by means of fatigue tests, like repeated load four point bending tests. These tests are rather time consuming and, therefore, not suited for performance based specifications. In this article a new, faster procedure to determine the fatigue characteristics is introduced. The procedure is...

Measuring the steering performance of ships during full-scale trials and model tests

Vergelijkende comfortmetingen aan boord van twee schepen

Bridge design on Dutch merchant vessels; an ergonomic study. Part II: First results of a questionnaire completed by captains, navigating officers and pilots. Part IV: Evaluation of standards and recommendations by Means of a static mock-up