Searched for: %2520
(1 - 20 of 124)

Pages

document
Gao, Ziyao (author), Zhao, C. (author), Zhou, Kai (author), Wu, Junru (author), Tian, Yao (author), Deng, Xianming (author), Zhang, Lihan (author), Lin, Kui (author), Wagemaker, M. (author)
Nickel-rich layered oxide cathodes promise ultrahigh energy density but is plagued by the mechanical failure of the secondary particle upon (de)lithiation. Existing approaches for alleviating the structural degradation could retard pulverization, yet fail to tune the stress distribution and root out the formation of cracks. Herein, we report...
journal article 2024
document
El Hajj, Marcel M. (author), Steele-Dunne, S.C. (author), Almashharawi, Samer K. (author), Tian, X. (author), Johansen, Kasper (author), Camargo, Omar A.Lopez (author), Amezaga-Sarries, Adria (author), Mas-Vinolas, Andreu (author), McCabe, Matthew F. (author)
Soil moisture (SM) is an important state variable in land surface models. Here, we investigate the potential of a ground-based global navigation satellite system receiver with two linearly polarized antennas that measure the interference power (IP) of direct and reflected signals in horizontal polarization (H-pol) and vertical polarization (V...
journal article 2024
document
Tang, Zhuorui (author), Zhao, Shibo (author), Li, Jian (author), Zuo, Yuanhui (author), Tian, Jing (author), Tang, Hongyu (author), Fan, J. (author), Zhang, Kouchi (author)
This work addresses a novel technique for selecting the best process parameters for the 4H–SiC epitaxial layer in a horizontal hot-wall chemical vapor reactor using a transient multi-physical (thermal-fluid-chemical) simulation model and combined with a machine-learning model. An experiment was performed to validate the feasibility of the...
journal article 2024
document
Zhang, Zhenya (author), Wei, Houyu (author), Xiao, Yanqiu (author), Cheng, Chuanxiao (author), Tian, Jiean (author), Li, Xinxin (author), Liu, Junrui (author), Liu, Zhengxuan (author)
This paper comprehensively investigates the purge mechanism of proton exchange membrane fuel cells during the shutdown process, which qualitatively examines the effect of purge parameters (including current density, stoichiometric ratio, and relative humidity) on water content variation, and further quantitatively investigates the remaining...
journal article 2024
document
Tian, X. (author), Volkov, Oleg (author), Voskov, D.V. (author)
In this study, we present an efficient and flexible adjoint-based framework for history matching and forecasting geothermal energy extraction at a large scale. In this framework, we applied the Principal Component Analysis to reduce the parameter space for representing the complex geological model. The adjoint method is implemented for...
journal article 2024
document
Tian, X. (author), Wapperom, M.B. (author), Gunning, James (author), Jackson, Samuel (author), Wilkins, Andy (author), Green, Chris (author), Ennis-King, Jonathan (author), Voskov, D.V. (author)
In this study, we conduct a comprehensive history matching study for the FluidFlower benchmark model. This benchmark was prepared and organized by the University of Bergen, the University of Stuttgart, and Massachusetts Institute of Technology, for promoting understanding of the complex physics of geological carbon storage (GCS) through in...
journal article 2024
document
Tian, X. (author)
This study investigates the application of inverse modeling in numerical geo-energy scenarios such as petroleum, geothermal, and CCS projects. The study aims to enhance model accuracy and predictive capabilities for real-world applications. The focus lies on the implementation of the inverse modeling framework within the open-source simulator...
doctoral thesis 2023
document
Setaki, F. (author), Tian, F. (author), Turrin, M. (author), Tenpierik, M.J. (author), Nijs, L. (author), van Timmeren, A. (author)
This paper discusses a novel, compact sound absorption solution with high performance at various frequencies, including low frequencies, achieved through the effective use of Computational Design and Additive Manufacturing (AM). Sound absorption is widely applied for reducing noise and improving room acoustics; however, it is often constrained...
journal article 2023
document
Zhang, Peng (author), Liu, Wei (author), Liu, Siming (author), Tian, Xu (author), Li, Yimiao (author), Huang, Y. (author)
Corrosion poses a significant risk to the safety of energy pipelines, while landslide disasters emerge as the primary threat responsible for triggering pipeline failures across mountainous areas. To date, there is limited research focused on the safety of energy pipelines considering the synergistic effect of corrosion and landslides. The...
journal article 2023
document
Li, Yonghao (author), Zhang, Ning (author), Sun, Renjuan (author), Guan, Yanhua (author), Liu, Lemin (author), Tian, Changjin (author), Ling, Yifeng (author), Zhang, Hongzhi (author), Šavija, B. (author)
The performance of engineered cementitious composites (ECCs) under coupled salt freezing and loaded conditions is important for its application on the transportation infrastructure. However, in most of the studies, the specimens were generally loaded prior to the freezing. The influence of sustained load was merely considered. To this end,...
journal article 2023
document
Tian, Yongding (author), Guo, Zhuoran (author), Zhang, Jiaxuan (author), Al-Ars, Z. (author)
Many researchers have proposed replacing the aggregation server in federated learning with a blockchain system to improve privacy, robustness, and scalability. In this approach, clients would upload their updated models to the blockchain ledger and use a smart contract to perform model averaging. However, the significant delay and limited...
journal article 2023
document
Zhu, Yifan (author), Lu, Huimin (author), Wang, Jianping (author), Yu, Tongjun (author), Li, Z.Z.L. (author), Tian, Yucheng (author)
In order to improve the light extraction of AlGaN-based short wavelength ultraviolet light emitting diodes (DUC-LEDs), a type of microstructure with high aspect ratio is introduced and optimized on the AlN substrate surface. And, particle swarm optimization (PSO) algorithm is used to inverse design of the surface microstructure to maximize...
journal article 2023
document
Su, Shuai (author), Goverde, R.M.P. (author), Tian, Zhongbei (author)
contribution to periodical 2023
document
Zhu, Man (author), Tian, Kang (author), Wen, Yuan Qiao (author), Cao, Ji Ning (author), Huang, L. (author)
This study contributes to addressing the challenge of quickly obtaining an effective and accurate nonparametric model for describing ship maneuvering motion in three degrees of freedom (3-DOF). To achieve this, an intelligent ship dynamics nonparametric modeling method named improved PER-DDPG is proposed. This method leverages the deep...
journal article 2023
document
Tan, Xiaotong (author), Xu, Heyong (author), Tian, R. (author)
Delayed detached eddy simulation (DDES) is used to simulate the flow field around the conformal optical window turret and the flat optical window turret. The aero-optical effect and the far-field diffraction result of the two optical windows at 0°, 90° and 180° angles are quantitatively analyzed based on the flow field around the turret....
journal article 2023
document
Zhang, Ying (author), Mao, Binbin (author), Yang, M. (author), Lu, Kaihua (author), Tian, Fuchao (author)
contribution to periodical 2023
document
Reukers, Matthijs A. (author), Tian, Y. (author), Al-Ars, Z. (author), Hofstee, H.P. (author), Brobbel, M. (author), Peltenburg, J.W. (author), van Straten, J. (author)
Tydi is an open specification for streaming dataflow designs in digital circuits, allowing designers to express how composite and variable-length data structures are transferred over streams using clear, data-centric types. These data types are extensively used in a many application domains, such as big data and SQL applications. This way,...
journal article 2023
document
Zhang, Bin (author), Gao, Xu (author), Xu, S. (author), Yang, Xinkui (author), Tian, Qin (author), Liu, Jiayi (author)
Microwave heating is an effective method to achieve autonomic crack healing in asphalt mixtures, and the use of microwave-absorbing materials can largely improve this healing efficiency. As a solid waste, coal gangue contains metal oxides, which shows the possibility of microwave heating. In order to further promote the application of coal...
journal article 2023
document
Flemisch, Bernd (author), Nordbotten, Jan M. (author), Geiger, S. (author), Hajibeygi, H. (author), Tian, X. (author), Voskov, D.V. (author), Wang, Y. (author), Wapperom, M.B. (author), Zhang, Z. (author)
Successful deployment of geological carbon storage (GCS) requires an extensive use of reservoir simulators for screening, ranking and optimization of storage sites. However, the time scales of GCS are such that no sufficient long-term data is available yet to validate the simulators against. As a consequence, there is currently no solid basis...
journal article 2023
document
Cromjongh, Casper (author), Tian, Y. (author), Hofstee, H.P. (author), Al-Ars, Z. (author)
In spite of progress on hardware design languages, the design of high-performance hardware accelerators forces many design decisions specializing the interfaces of these accelerators in ways that complicate the understanding of the design and hinder modularity and collaboration. In response to this challenge, Tydi is presented as an open...
conference paper 2023
Searched for: %2520
(1 - 20 of 124)

Pages