Searched for: %2520
(1 - 20 of 32)

Pages

document
Vahidi, A. (author), Gebremariam, A.T. (author), Di Maio, F. (author), Meister, K.R. (author), Koulaeian, T. (author), Rem, P.C. (author)
The construction industry urgently requires a resilient information system for effective coordination of data transmission among various stakeholders, including both the public and private sectors. Such an advanced digital solution would not only enhance transparency along the value chain but also improve both the quality of and confidence in...
journal article 2024
document
Kumar, Anand (author), Singh, Karan (author), Shariq, Mohd (author), Lal, C. (author), Conti, M. (author), Amin, Ruhul (author), Chaudhry, Shehzad Ashraf (author)
In the era of the Internet of Communication Technologies (ICT), the Internet is becoming more popular and widely used across the world. Radio Frequency IDentification (RFID) has become a prominent technology in healthcare systems for identifying tagged objects. The RFID tags are attached to the billions of different healthcare devices or...
journal article 2023
document
Shariq, Mohd (author), Singh, Karan (author), Lal, C. (author), Conti, M. (author), Khan, Tayyab (author)
Internet of Things (IoT) technologies rapidly evolve and are used in many real-life applications. One of the core technologies used in various IoT applications is Radio Frequency IDentification (RFID) technology. RFID wirelessly and uniquely identifies the tagged objects without a direct line of sight. However, the research community had...
journal article 2022
document
van Adrichem, Romeo (author)
Due to the short shelf-life of flowers (circa 7 days) good inventory management is required to minimize disposals. The trade-off between supplying enough to meet demand yet not too much to prevent expiration is a delicate matter. However, in the current situation uncertainty about inventory levels due to inadequate information and conventional...
master thesis 2021
document
Meister, Kozmo (author)
The use of concrete, the world’s most applied construction material, has significant environmental impact in its sourcing and end-of-life stages. Closing the concrete loop prevents devalorization of concrete (aggregates) and has environmental benefits. In the European Union, the recently published Green Deal provides additional stimulus to the...
master thesis 2020
document
Hengst, Staffan (author)
Hospitals are facing enormous financial pressure over the last years. To achieve lower costs, hospitals should invest in smart ways of working to make optimal use of the scarce capacities. A solution can be digitising processes in the hospital to prevent it from making more costs. In line with this founding, planning and scheduling of the...
master thesis 2019
document
Ketel, Thijmen (author)
RFID technology is slowly replacing traditional bar codes as a way to identify and track objects and individuals. However, consumer-oriented market penetration has been limited as dedicated RFID readers carry a high start-up cost. Furthermore, interactions with individual tags require special-purpose RFID readers. We present a novel RFID tag...
master thesis 2019
document
Kraaijeveld, Michael (author), de Gruijl, David (author), Postma, Marco (author), Roos, Stefano (author), de Groot, Daan (author), van der Meijs, Emiel (author)
In this thesis, the implementation of a passive, chipless, frequency coded Radio-Frequency Identification (RFID) tag for bedload transport studies is proposed. The proposed tag will be deployed in the semi-arid Río Colorado river, Bolivia with the aim to develop quantitative sediment transport models that relate transport to grain size. The...
bachelor thesis 2019
document
Haring, Marielle (author)
In hospitals, the duration of surgical procedures vary even when the same procedure is performed.<br/>Surgical end-time of the procedure is currently predicted using historical data about similar procedures,<br/>the procedure time and sometimes an indication of the operating surgeon is also taken into account.<br/>After the start of the...
master thesis 2018
document
de Boer, Daan (author)
The retail market is changing rapidly. Many new offline, as well as online competitors, arrived. As a result, customers became more demanding. One of the critical elements is that customers expect a high variety of products that are always available. Out of Stocks (OoSs) in apparel stores result in lost sales in the short term and a declining...
master thesis 2018
document
Sabur, M. (author)
This thesis provides a rationale to introduce the concept of labelled electronics in the European Union. This concept entails the improvement of e-waste recycling by equipping electronic products with labels for identification purposes. The common view in literature as well as the view of producers and recyclers regarding labelled electronics...
master thesis 2016
document
Moschos, G. (author)
The transformation of a new technological principle into a marketable product usually signifies a long and risky route for organizations engaged in the commercialization of radically new high-tech products. New products often fail to make it to the market, are delayed for their market introduction, or are withdrawn shortly after their market...
master thesis 2016
document
Hassan, A.M. (author)
Characterization of fluid properties is significant in the petroleum engineering practice, especially in solvent-based enhanced oil recovery (SEOR) where the use of injected chemicals should ideally be reduced to the bare minimum in order to minimize the costs and environmental impact of SEOR. However, current techniques for measurement inside...
master thesis 2015
document
Van Blijswijk, M.L. (author)
The Central Sterile Supply Department (CSSD) of the Leiden University Medical Center (LUMC) is part of the sterilization cycle and provides sterile surgical instruments to the Operation Room (OR). The coming years several changes are imposed on this department such as the requirement of Unique Device Identification (UDI) of all instruments and...
master thesis 2015
document
Tan, J. (author)
Computational RFID (CRFID) devices are emerging platforms that can enable perennial computation and sensing by eliminating the need for batteries. Although much research has been devoted to improving upstream (CRFID to RFID reader) communication rates, the opposite direction has so far been neglected, presumably due to the difficulty of...
master thesis 2015
document
Fondse, S.L.J. (author)
In a world of improving health care, some diseases are still very hard to diagnose. The most common reasons for this problem is the fact that those diseases are non-symptomatic. To gain better diagnoses of such illnesses long term ExG by using bio-medical implants is a good option. These implants have to be powered by a wireless power link. This...
master thesis 2015
document
Miller, Seirgei (author), Bijleverld, Frank (author), Erkens, S. (author), Anupam, K. (author)
Governments, regulatory bodies and road authorities all push for and promote sustainability. Contractors respond with strategies to reduce their carbon footprints. Besides optimising their asphalt production and logistics processes, companies are investing in the development of low energy asphalt mixes. Warm Mix Asphalt (WMA) is such an asphalt...
journal article 2015
document
Van der Laan, E.B. (author)
Indoor localization is a hot topic since the demand for Location Based Services (LBS) has increased, especially (semi) public places like museums, office buildings and congress halls would benefit from LBS. Outdoor localization and its applications like navigation systems are well implemented in society and used by many on a daily basis....
master thesis 2014
document
Toussaint, R.A.J. (author)
The TickID group is a Rotterdam based company founded in 2010. It provides festivals and events with services that render the use of entrance tickets and cash unnecessary using RFID (Radio frequency identification) systems. One of their products is a registration beacon, used to register visitors and grant access to the right people at the right...
master thesis 2014
document
Schoof, W.W.A. (author), Van der Spree, S. (author)
Dit onderzoek is tot stand gekomen in nauwe samenwerking met het bacheloreindproject van mevrouw Ferouge en de heren de Andrade en Yntema. Het onderzoek richt zich op het fabriceren van een passieve sensor op een plastic substraat. Momenteel worden er op het Delft Institute of Microsystems and Nanoelectronics (DIMES) Technology Center nieuwe...
bachelor thesis 2013
Searched for: %2520
(1 - 20 of 32)

Pages