- document
-
Chang, Z. (author), Liang, M. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)Cementitious materials may exhibit significant creep at very early age. This is potentially important for concrete 3D printing, where the material is progressively loaded even before it sets. However, does creep actually affect the buildability of 3D printed concrete? Herein, the influence of early-age creep on the buildability of 3D printed...journal article 2023
- document
-
Liang, M. (author), Schlangen, E. (author), Šavija, B. (author)Stress evolution of restrained concrete is directly related to early-age cracking (EAC) potential of concrete, which is a tricky problem that often happens in engineering practice. Due to the global objective of carbon reduction, Ground granulated blast furnace slag (GGBFS) concrete has become a more promising binder comparing with Ordinary...book chapter 2023
- document
-
He, S. (author), Liang, M. (author), Yang, En-hua (author), Schlangen, E. (author)The properties of the interfacial transition zone (ITZ) between microfiber and cement-based matrix are of primary significance for the overall behavior of strain hardening cementitious composites (SHCCs). However, due to the relatively small diameter of polymeric microfibers (e.g., PVA fiber), it is technically difficult to obtain...book chapter 2023
- document
-
Eslamlou, A.D. (author), Ghaderiaram, A. (author), Fotouhi, M. (author), Schlangen, E. (author)The growing demand towards life cycle sustainability has created a tremendous interest in non-destructive evaluation (NDE) to minimize manufacturing defects and waste, and to improve maintenance and extend service life. Applications of Magnetic Sensors (MSs) in NDE of civil engineering structures have become of great interest in recent years...conference paper 2023
- document
-
Kamat, Ameya (author), Lubelli, B. (author), Schlangen, E. (author)Sodium chloride (NaCl) is one of the most commonly occurring weathering agents, responsible for a progressive damage in mortar. Current solutions to mitigate salt damage in mortar, such as the use of mixed-in water repellent additives, have often exhibited low compatibility with the existing building fabric. In the last years, research has...book chapter 2023
- document
-
Huang, Y. (author), Schlangen, E. (author), Lukovic, M. (author)Ultra-high performance fiber-reinforced concrete (UHPFRC) exhibits high compressive and tensile strength together with outstanding durability. Due to these superior properties, UHPFRC is promising for retrofitting existing reinforced concrete (RC) bridges. While research and on-site applications show the significant improvement of RC structures...conference paper 2023
- document
-
He, S. (author), Lukovic, M. (author), Schlangen, E. (author)In the current study, experiments were carried out to investigate the cracking behaviour of reinforced concrete beams consisting of 1-cm-thick layer of Strain Hardening Cementitious Composite (SHCC) in the concrete cover zone. The hybrid SHCC/concrete beams with different types of interfaces were tested and compared with control reinforced...conference paper 2023
- document
-
Eslamlou, Armin Dadras (author), Ghaderiaram, A. (author), Schlangen, E. (author), Fotouhi, M. (author)The growing demand towards life cycle sustainability has created a tremendous interest in non-destructive evaluation (NDE) to minimize manufacturing defects and waste, and to improve maintenance and extend service life. Applications of Magnetic Sensors (MSs) in NDE of civil Construction Materials to detect damage and deficiencies have become...review 2023
- document
-
Zhang, H. (author), Jin, Zuquan (author), Jiang, Nengdong (author), Ge, Zhi (author), Schlangen, E. (author), Ling, Yifeng (author), Šavija, B. (author), Wang, Zheng (author)The classically lattice model assumes the local elements behave elastic brittle, neglecting the ductility of the mortar matrix. This leads to the simulated load⁃displacement response more brittle than the realistic. To solve the aforementioned issue, a piece⁃wise approach was introduced to describe the elastic⁃plastic constitutive relation of...journal article 2023
- document
-
He, S. (author), Chen, Y. (author), Liang, M. (author), Yang, En-Hua (author), Schlangen, E. (author)This study investigates the microstructural changes of cement paste due to the inclusion of polymeric microfiber at different water-to-cement (w/c) ratios. A procedure to quantify the porosity of epoxy impregnated interfacial transition zone (ITZ) is also presented. Results show that the microstructures of the ITZ beneath and above a...journal article 2023
- document
-
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, X. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)In 3D concrete printing, fast structuration is a prerequisite for ideal buildability. This paper aims to study the impact of inorganic additives, i.e., CaCl<sub>2</sub> and gypsum, on structural build-up and very early-age hydration of limestone-calcined clay-cement (LC3) pastes within the first 70–80 min. Results show that, increasing the...journal article 2023
- document
-
He, S. (author), Mustafa, S. (author), Chang, Z. (author), Liang, M. (author), Schlangen, E. (author), Lukovic, M. (author)In the current study, experiments and numerical simulations were carried out to investigate the cracking behavior of reinforced concrete beams consisting of a very thin layer (i.e., 1 cm in thickness) of SHCC in the concrete cover, tension zone. A novel type of SHCC/concrete interface that features a weakened chemical adhesion but an enhanced...journal article 2023
- document
-
Liang, M. (author), Zhang, Y. (author), He, S. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)This study investigated the evolution process of high-volume slag cement (HVSC) paste from a chemo-mechanical standpoint. HVSC specimens with a 70 w.t. % slag replacement rate were studied at various ages. Evolution of phase assemblage, microstructure development, and micromechanical properties were analyzed using TGA/XRD/MIP/SEM-EDS and nano...journal article 2023
- document
-
van Overmeir, A.L. (author), Šavija, B. (author), Bos, F. P. (author), Schlangen, E. (author)With the introduction of 3D concrete printing, research started on how to include reinforcement in 3D printed structures. Initial studies on the implementation of strain hardening cementitious composites (SHCC) as self-reinforcing printable mortars have shown promising results. The development of this new type of SHCC comes with additional...journal article 2023
- document
-
Schlangen, Miek (author), Schlangen, E. (author), van der Goot, Atze Jan (author)Mechanical properties of food products are regularly analysed by tensile tests. The aim of this study was to demonstrate the potential of using advanced tensile testing techniques to better understand the mechanical properties of anisotropic food products, such as meat analogues and certain dairy products. The effects of various tensile...journal article 2023
- document
-
Chang, Z. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)Herein, different kinds of methods for buildability quantification of 3D concrete printing are reviewed, including experimental approaches, analytical modelling, and numerical simulations. A brief introduction on printing process is first given. This discusses the material properties in different stages. Material printability, which...journal article 2023
- document
-
Sayadi, Sina (author), Chang, Z. (author), He, S. (author), Schlangen, E. (author), Mihai, I.C. (author), Jefferson, Anthony (author)This paper describes the development of a discrete lattice model for simulating structures formed from self-healing cementitious materials. In particular, a new approach is presented for simulating time dependent mechanical healing in lattice elements. The proposed formulation is designed to simulate the transient damage and healing behaviour...journal article 2023
- document
-
He, S. (author), Wan, Z. (author), Chen, Y. (author), Jonkers, H.M. (author), Schlangen, E. (author)The current study investigates short-term and long-term crack-healing behaviour of mortars embedded with bacteria-based poly-lactic acid (PLA) capsules under both ideal and realistic environmental conditions. Two sets of specimens were prepared and subjected to different healing regimes, with the first set kept in a mist room for varying...journal article 2023
- document
-
Kamat, Ameya (author), Lubelli, B. (author), Schlangen, E. (author)This paper investigates the leaching behaviour of sodium ferrocyanide, a known crystallisation inhibitor of sodium chloride, which is added to mortars for mitigation of salt decay. Leaching and depletion of the inhibitor is a practical performance related issue that might over time, make the inhibitor less effective against salt decay. In...journal article 2023
- document
-
Xie, J. (author), Xu, Y. (author), Wan, Z. (author), Ghaderiaram, A. (author), Schlangen, E. (author), Šavija, B. (author)The high deformation capacity of auxetic cementitious cellular composites (ACCCs) makes them promising for strain-based energy harvesting applications in infrastructure. In this study, a novel piezoelectric energy harvester (PEH) with ACCCs and surface-mounted PVDF film based on strain-induced piezoelectric mechanisms has been designed,...journal article 2023