Searched for: %2520
(61 - 80 of 268)

Pages

document
Gao, Jian (author), Jin, Peng (author), Zhang, Yuze (author), Dong, H. (author), Wang, Ruixing (author)
Due to low activity or long mineralization time, traditional mineral agents for self-healing concrete generally need a long time to achieve a desired repair efficiency. Inspired by epoxy resin AB glue which can consolidate in a short time when mixing the two components together, a novel type of fast-responsive capsules based on two soluble...
journal article 2022
document
Dong, Y. (author), Patil, Sandeep (author), van Arem, B. (author), Farah, H. (author)
Accurate and reliable lane detection is vital for the safe performance of lane-keeping assistance and lane departure warning systems. However, under certain challenging circumstances, it is difficult to get satisfactory performance in accurately detecting the lanes from one single image as mostly done in current literature. Since lane...
journal article 2022
document
Li, Wei (author), Yi, Liming (author), Jiang, Wen (author), Dong, H. (author), Zhang, Yong (author)
This paper presents experimental investigations into the effects of ultrafine blast furnace slag on microstructure improvements against chloride penetration in saturated and unsaturated cementitious systems exposed to cyclic drying–wetting conditions. The hydration kinetics of ultrafine slag powders and pore solution chemistry in slag-blended...
journal article 2022
document
Nejad, Amir R. (author), Keller, Jonathan (author), Guo, Yi (author), Sheng, Shawn (author), Polinder, H. (author), Watson, S.J. (author), Dong, J. (author), Qin, Z. (author), Ebrahimi, Amir (author)
This paper presents the state-of-the-art technologies and development trends of wind turbine drivetrains – the system that converts kinetic energy of the wind to electrical energy – in different stages of their life cycle: design, manufacturing, installation, operation, lifetime extension, decommissioning and recycling. Offshore development and...
review 2022
document
Dong, J. (author), Lin, P. (author), Putra, N.E. (author), Tümer, N. (author), Leeflang, M.A. (author), Huan, Z. (author), Fratila-Apachitei, E.L. (author), Chang, J. (author), Zadpoor, A.A. (author), Zhou, J. (author)
The treatment of femoral nonunion with large segmental bone defect is still challenging. Although magnesium alloys have been considered potential materials for such a treatment, their application is limited by their fast degradation. Adding bioceramic particles into magnesium to form Mg-matrix composites is a promising strategy to adjust...
journal article 2022
document
Yao, Yu (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author), Zhu, Zichong (author)
This letter proposes a general single-sensor active damping framework for LCL-equipped high-speed permanent magnet synchronous machines. By the proposed method, arbitrary damping assignment and stability for the LCL resonance within the Nyquist frequency are achieved with only the inverter-current feedback or motor-current feedback. Moreover,...
journal article 2022
document
Ning, Lingbin (author), Zhou, Min (author), Hou, Zhuopu (author), Goverde, R.M.P. (author), Wang, Fei Yue (author), Dong, Hairong (author)
This paper proposes a novel train trajectory optimization approach for high-speed railways. We restrict our attention to single train operation scenarios with different scheduled/rescheduled running times aiming at generating optimal train recommended trajectories in real time, which can ensure punctuality and energy efficiency of train...
journal article 2022
document
Raju, Narayana (author), Schakel, W.J. (author), Reddy, N. (author), Dong, Y. (author), Farah, H. (author)
Automated driving systems, which can take over certain dynamic driving tasks from the driver, are becoming increasingly available in commercial vehicles. One of these automated driving systems widely introduced in commercial vehicles is Adaptive Cruise Control (ACC). This system is designed to maintain certain desired driving speeds and time...
journal article 2022
document
He, K. (author), Dong, Chaoyang (author), Wang, Qing (author)
This paper deals with the problem of active disturbance rejection control (ADRC) design for a class of uncertain nonlinear systems with sporadic measurements. A novel extended state observer (ESO) is designed in a cascade form consisting of a continuous time estimator, a continuous observation error predictor, and a reset compensator. The...
journal article 2022
document
Li, Chen (author), Mogollón, José (author), Tukker, Arnold (author), Dong, J. (author), von Terzi, D.A. (author), Zhang, Chunbo (author), Steubing, Bernhard (author)
Offshore wind energy (OWE) is a cornerstone of future clean energy development. Yet, research into global OWE material demand has generally been limited to few materials and/or low technological resolution. In this study, we assess the primary raw material demand and secondary material supply of global OWE. It includes a wide assortment of...
journal article 2022
document
Wang, T. (author), Dong, Jianfei (author)
Anti-fungal blue light (ABL) therapies are based on the photochemical reaction of endogenous photosensitizer (PS) in fungal cells. Knowing the spectral sensitivity of these cells for the ability to generate singlet oxygen is thus important to determine the most effective wavelength of such light therapies, and thereby to design ABL...
journal article 2022
document
Wang, T. (author), Dong, Jianfei (author), Zhang, Kouchi (author)
Objective: The goal of this study is to investigate the efficacy, safety, and mechanism of ABL for inactivating Candida albicans (C. albicans), and to determine the best wavelength for treating candida infected disease, by experimental measurements and dynamic modeling. Methods: The changes in reactive oxygen species (ROS) in C. albicans and...
journal article 2022
document
Cao, Zhi (author), Huang, Yunkai (author), Guo, Baocheng (author), Peng, Fei (author), Dong, J. (author), Hemeida, Ahmed (author)
To facilitate the active magnetic bearing (AMB) design and analysis, an accurate and fast model that considers both rotor eccentricity and the saturation effect is necessary. In this article, a novel hybrid analytical model (HAM) for effective calculation of the magnetic field of the AMB is proposed. Eccentricity and local saturation are...
journal article 2022
document
Shi, W. (author), Dong, J. (author), Soeiro, Thiago B. (author), Deng, Junjun (author), Riekerk, C. (author), Bauer, P. (author)
Resonant circuits are commonly used in inductive power transfer (IPT) systems for the charging of electric vehicles because of the high power efficiency. Transient behaviors of the resonant circuits, which play a significant role in the design and analysis of IPT systems, are cumbersome to model analytically because of the high-order. This...
journal article 2022
document
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
When considering EV wireless charging that uses inductive power transfer with magnetic resonance, the coils’ current distortion must be minimized to guarantee compliance with the electromagnetic compatibility limits on the radiated magnetic field set by the relevant industrial standards. This paper analyzes the current distortion caused by...
conference paper 2022
document
Dong, J. (author), Becetti, Belkassem (author), Bauer, P. (author)
This paper investigates a high speed vacuum tube train system relying on wheels for suspension and a multi-mode linear electric machine for charging and propulsion: the machine will be configured as a doubly fed induction machine for charging at stationary, and as a permanent magnet synchronous machine for acceleration and deceleration. The...
conference paper 2022
document
Dong, Y. (author), Chen, Kejia (author), Peng, Yinxuan (author), Ma, Zhiyuan (author)
As the central nerve of the intelligent vehicle control system, the in-vehicle network bus is crucial to the security of vehicle driving. One of the best standards for the in-vehicle network is the Controller Area Network (CAN bus) protocol. However, the CAN bus is designed to be vulnerable to various attacks due to its lack of security...
conference paper 2022
document
Yu, G. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
This paper presents the semiconductor losses analytical equations in closed form for two-level voltage source converter, three-level neutral point clamped (NPC) and three-level T-Type PFC topologies in high power applications. The reverse parallel current conduction between the SiC MOSFETs channel and body diode is considered. A circuit...
conference paper 2022
document
Zhao, Zhendong (author), Chen, Xiaojun (author), Xuan, Yuexin (author), Dong, Ye (author), Wang, Dakui (author), Liang, K. (author)
Backdoor attack is a type of serious security threat to deep learning models. An adversary can provide users with a model trained on poisoned data to manipulate prediction behavior in test stage using a backdoor. The backdoored models behave normally on clean images, yet can be activated and output incorrect prediction if the input is stamped...
conference paper 2022
document
Dong, Thi Ngan (author), Mucke, Stefanie (author), Khosla, M. (author)
Growing evidence from recent studies implies that microRNAs or miRNAs could serve as biomarkers in various complex human diseases. Since wet-lab experiments for detecting miRNAs associated with a disease are expensive and time-consuming, machine learning techniques for miRNA-disease association prediction have attracted much attention in...
journal article 2022
Searched for: %2520
(61 - 80 of 268)

Pages