- document
-
Li, Xinhong (author), Khan, Faisal (author), Yang, M. (author), Chen, C. (author), Chen, Guoming (author)Subsea gas release is an industrial hazard that can impose fire hazards on offshore facilities near the gas surfacing area. However, risk assessment of the fire caused by subsea gas release is challenged due to inadequate recognition of the knowledge of subsea gas release mechanism and resulting hazards. At present, minimal researches...journal article 2021
- document
-
Zhang, Hua (author), Yu, Li (author), Liu, Tao (author), Ni, Hongwei (author), Li, Y. (author), Chen, Z. (author), Yang, Y. (author)Decreasing the preheating temperature is an effective step to control the energy consumption in the hot rolling process. In order to obtain the lowest preheating temperature to prepare enough thickness of oxide scale in the hot rolling process, the oxidation resistance of commercial steel samples with different Al and Si contents were...journal article 2020
- document
-
Pang, Xiongqi (author), Jia, Chengzao (author), Zhang, Kun (author), Li, Maowen (author), Wang, Y. (author), Peng, Junwen (author), Li, Boyuan (author), Chen, Junqing (author)Fossil fuel resources are invaluable to economic growth and social development. Understanding the formation and distribution of fossil fuel resources is critical for the search and exploration of them. Until now, the vertical distribution depth of fossil fuel resources has not been confirmed due to different understandings of their origins...journal article 2020
- document
-
Chen, Zhiyang (author), Dong, Xichao (author), Li, Y. (author), Hu, Cheng (author)The single-pass geosynchronous synthetic aperture radar interferometry (GEO InSAR) adopts the formation of a slave satellite accompanying the master satellite, which can reduce the temporal decorrelation caused by atmospheric disturbance and observation time gap between repeated tracks. Current formation design methods for spaceborne SAR are...journal article 2020
- document
-
Zou, Sheng (author), Xiao, Hanbin (author), Ye, Fangping (author), Li, Z. (author), Tang, Wenzhi (author), Zhu, Feng (author), Chen, Chentong (author), Zhu, Chao (author)The inevitably formed residual stress in the Selective Laser Melting (SLM) process leads to distortion, crack and even delamination of the workpiece. Single laser is commonly applied during SLM processing. However, its productivity is much lower than multiple lasers. In addition, the research of residual stress with multi-laser condition...journal article 2020
- document
-
Chen, Zhuo Yi (author), Li, Chuan Xi (author), He, Jun (author), Xin, H. (author)Diaphragm cutouts are set to release redundant constraints and hence reduce weld fatigue at the connection of U-ribs to diaphragms in orthotropic steel decks. However, most fatigue cracks which originate from the edge of cutouts are in fact detected in the diaphragms. Therefore, a retrofit technology on cracked cutouts at the diaphragm is...journal article 2020
- document
-
Chen, Y. (author), Chaves Figueiredo, S. (author), Li, Z. (author), Chang, Z. (author), Jansen, K. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author)In 3D concrete printing (3DCP), it is necessary to meet contradicting rheological requirements: high fluidity during pumping and extrusion, and high stability and viscosity at rest to build the layered structure. In this paper, the impact of the hydroxypropyl methylcellulose (HPMC)-based viscosity-modifying admixture (VMA) on the 3D printability...journal article 2020
- document
-
Chen, Y. (author), Romero Rodriguez, C. (author), Li, Z. (author), Chen, B. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author)This study aims to investigate the influences of different grades of calcined clay on 3D printability, compressive strength (7 days), and hydration of limestone and calcined clay-based cementitious materials. Calcined clays that contained various amounts of metakaolin were achieved by blending low-grade calcined clay (LGCC) and high-grade...journal article 2020
- document
-
Fan, Guangpeng (author), Nan, L. (author), Chen, Feixiang (author), Dong, Yanqi (author), Wang, Zhiming (author), Li, Hao (author), Chen, Danyu (author)Tree-level information can be estimated based on light detection and ranging (LiDAR) point clouds. We propose to develop a quantitative structural model based on terrestrial laser scanning (TLS) point clouds to automatically and accurately estimate tree attributes and to detect real trees for the first time. This model is suitable for forest...journal article 2020
- document
-
Wang, L. (author), Wang, Ping (author), Chen, Rong (author), Li, S. (author), Li, Z. (author)Embedded rail system (ERS) is a new type of track structure with many advantages due to its continuous rail support. The rapid development of urban rail transit all over the world renders its application prospect broad. However, the cracks and debonds in ERS present a threat to the traffic safety and a possibility for high maintenance costs....journal article 2020
- document
-
Xiong, Yongming (author), Li, Chuanxi (author), Chen, Zhuoyi (author), He, Jun (author), Xin, H. (author)Residual stresses change the stress ratio of fluctuating stresses, hence seriously affect the fatigue life of orthotropic steel decks (OSDs) under traffic loading. Residual stress distributions near the U rib-diaphragm joints are very complicated and need to be investigated further. In this paper, a systematic method has been proposed for...journal article 2020
- document
-
Yu, Chengpu (author), Chen, Jie (author), Li, Shukai (author), Verhaegen, M.H.G. (author)The identification of affinely parameterized state–space system models is quite popular to model practical physical systems or networked systems, and the traditional identification methods require the measurements of both the input and output data. However, in the presence of partial unknown input, the corresponding system identification...journal article 2020
- document
-
Li, Z. (author), Yao, X. (author), Chen, Y. (author), Lu, T. (author), Ye, G. (author)Alkali-activated slag and fly ash (AASF) materials are emerging as promising alternatives to conventional Portland cement. Despite the superior mechanical properties of AASF materials, they are known to show large autogenous shrinkage, which hinders the wide application of these eco-friendly materials in infrastructure. To mitigate the...journal article 2020
- document
-
Shen, X. J. (author), Li, D. Z. (author), Tang, S. (author), Chen, J. (author), Fang, H. (author), Wang, G. D. (author)It is still a big challenge to obtain excellent low-temperature toughness for bulk steel materials. Delamination is an effective method to improve low-temperature toughness. In the present study, delamination toughening in a low carbon microalloyed steel plate with elongated and ultrafine-grained microstructure rolled in the dual-phase region...journal article 2019
- document
-
Han, Rui (author), Liu, Chi Harold (author), Li, Shilin (author), Chen, Lydia Y. (author), Wang, Guoren (author), Tang, Jian (author), Ye, Jieping (author)The core of many large-scale machine learning (ML) applications, such as neural networks (NN), support vector machine (SVM), and convolutional neural network (CNN), is the training algorithm that iteratively updates model parameters by processing massive datasets. From a plethora of studies aiming at accelerating ML, being data...journal article 2019
- document
-
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...journal article 2019
- document
-
Chen, Y. (author), Li, Z. (author), Chaves Figueiredo, S. (author), Copuroglu, Oguzhan (author), Veer, F.A. (author), Schlangen, E. (author)The goal of this study is to investigate the effects of different grades of calcined clay on the extrudability and early-age strength development under ambient conditions. Four mix designs were proposed. Three of them contained high, medium, and low grades of calcined clay, respectively, and one was the reference without calcined clay. In terms...journal article 2019
- document
-
Li, Z. (author), Nedeljković, Marija (author), Chen, B. (author), Ye, G. (author)This study investigates the effectiveness of metakaolin (MK)in mitigating the autogenous shrinkage of alkali-activated slag (AAS). It is found that the autogenous shrinkage of AAS paste can be reduced by 40% and 50% when replacing 10% and 20% slag with MK, respectively. By providing additional Si and Al, and decreasing the pH of the pore...journal article 2019
- document
-
Li, Z. (author), Zhang, Shizhe (author), Zuo, Y. (author), Chen, Wei (author), Ye, G. (author)Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....journal article 2019
- document
-
Chen, Z. (author), Wang, Li jun (author), Du, Xiao jia (author), Sun, Zai hong (author), Li, Fu shen (author), Chou, Kuo Chih (author)A commercial solid oxide fuel cell with a Ni/YSZ anode was characterized under a pure methane atmosphere. The amount of deposited carbon increased with an increase in temperature but decreased when the temperature exceeded 700°C. The reactivity of carbon decreased with increasing deposition temperature. Filamentous carbon was deposited from...journal article 2019