- document
-
Li, Jiayu (author), Xu, Yunbo (author), Jing, Yi (author), Gao, Yijing (author), Liu, Hongliang (author), Yu, Yongmei (author), Banis, Alexandros (author), Kestens, L.A.I. (author), Petrov, R.H. (author)The phase transformations, microstructure and properties of two Medium-Mn processed via quenching and partitioning steels were compared in this contribution and a new strategy for controlling mechanical properties by introducing and controlling cold-worked ferrite prior to heat treatment is proposed. It was found that during heating, the...journal article 2023
- document
-
Kirchhof, Jan N. (author), Yu, Yuefeng (author), Yagodkin, Denis (author), Stetzuhn, Nele (author), de Araújo, Daniel B. (author), Kanellopulos, Kostas (author), Mañas Valero, S. (author), Coronado, Eugenio (author), van der Zant, H.S.J. (author)Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane resonator vs. the photon energy of incoming light. This method is a direct measurement of absorption, which has...journal article 2023
- document
-
Hao, R. (author), Zhang, Yuxiao (author), Ma, Wanjing (author), Yu, Chunhui (author), Sun, Tuo (author), van Arem, B. (author)With the development of internet of vehicles and automated driving, individual-based trajectory control at intersections becomes possible. Trajectory planning and coordination for connected and automated vehicles (CAVs) have been studied at isolated “signal-free” intersections and in “signal-free” corridors under the fully CAV environment in...journal article 2023
- document
-
Pan, S. (author), An, Xiaomeng (author), Yu, Zheru (author), Jiang, H. (author), Makinwa, K.A.A. (author)This article presents the design and implementation of a compact CMOS RC frequency reference. It consists of a frequency-locked loop (FLL) that locks the period of a voltage-controlled oscillator (VCO) to the time an RC network takes to charge to a reference voltage. Conventionally, an RC time constant with a near-zero temperature coefficient...journal article 2023
- document
-
Chen, Bei (author), Yu, Xin (author), Dong, Fuqiang (author), Wu, Wenxiu (author), Zu, Yuanzhe (author), Ren, S. (author)High-viscosity modified asphalt (HVMA) is the most commonly applied method in drainage asphalt pavements. However, some disadvantages of hot-mix HVMA, including high energy consumption and unavoidable environmental pollution, should be improved. Therefore, warm-mix additive (WMA) was introduced. In this paper, the effects of WMA on the...journal article 2023
- document
-
Dong, Fuqiang (author), Wang, Jincheng (author), Yu, Xin (author), Jiang, Mengmeng (author), Guo, Yongjia (author), Wang, Shiyu (author), Zu, Yuanzhe (author), Ren, S. (author)In this study, the environmentally friendly rejuvenators with waste thermal conductive oil, polymer, and the interfacial reinforcing agent were prepared. And the influence of the different rejuvenators on the rejuvenation mechanisms of aged SBS modified asphalt was characterized by different scales including the molecule structure, morphology...journal article 2023
- document
-
You, Kairui (author), Yu, Yanhui (author), Cai, Weiguang (author), Liu, Zhengxuan (author)The CO<sub>2</sub> emission mitigation of the commercial and public building sector (P&C) is critical for achieving China's carbon peak and carbon neutrality. Analyzing changes in CO<sub>2</sub> emissions and their driving factors from temporal and spatial perspective provides insights for developing equitable and effective...journal article 2023
- document
-
Wang, L. (author), Li, Erlei (author), Zhou, Zongyan (author), Zhang, Baicheng (author), Yu, Aibing (author)Powder bed fusion additive manufacturing has been applied to the fabrication of functionally graded materials. A new design that allows the material composition to change along the direction perpendicular to the powder spreading has been reported in the literature. Based on this design, this work examines the quality of the graded spread...journal article 2023
- document
-
Huang, R. (author), Zhao, Xuan (author), Yuan, Y. (author), Yu, Qiang (author), Liu, Chengqing (author), Daamen, W. (author)Pedestrian tactical choices and operational movement in evacuations essentially pertain to decision-making under risk and uncertainty. However, in microscopic evacuation models, this attribute has been greatly overlooked, even lacking a methodology to delineate the related decision characteristics (bounded rationality and risk attitudes), let...journal article 2023
- document
-
Dai, Pengcheng (author), Yu, Wenwu (author), Wang, He (author), Baldi, S. (author)Actor-critic (AC) cooperative multiagent reinforcement learning (MARL) over directed graphs is studied in this article. The goal of the agents in MARL is to maximize the globally averaged return in a distributed way, i.e., each agent can only exchange information with its neighboring agents. AC methods proposed in the literature require the...journal article 2023
- document
-
Yu, David J. (author), Haeffner, Melissa (author), Jeong, Hanseok (author), Pande, S. (author), Dame, Juliane (author), Di Baldassarre, Giuliano (author), Garcia-Santos, Glenda (author), Hermans, L.M. (author), Muneepeerakul, Rachata (author)Socio-hydrology has expanded and been effective in exposing the hydrological community to ideas and approaches from other scientific disciplines, and social sciences in particular. Yet it still has much to explore regarding how to capture human agency and how to combine different methods and disciplinary views from both the hydrological and...journal article 2022
- document
-
Zhang, Xinglong (author), Pan, W. (author), Scattolini, Riccardo (author), Yu, Shuyou (author), Xu, Xin (author)Koopman operators are of infinite dimension and capture the characteristics of nonlinear dynamics in a lifted global linear manner. The finite data-driven approximation of Koopman operators results in a class of linear predictors, useful for formulating linear model predictive control (MPC) of nonlinear dynamical systems with reduced...journal article 2022
- document
-
Zhao, Pengjun (author), Zeng, Liangen (author), Li, Peilin (author), Lu, Haiyan (author), Hu, Haoyu (author), Li, Chengming (author), Zheng, Mengyuan (author), Li, Haitao (author), Yu, Zhao (author), Qi, Y. (author)The threat of global climate change has caused the international community to pay close attention to atmospheric levels of greenhouse gases such as carbon dioxide. Transportation sector carbon dioxide emissions efficiency (TSCDEE) is a key indicator used to prioritize sustainable development in the transportation sector. In this paper, the...journal article 2022
- document
-
Hou, L. G. (author), Yu, H. (author), Wang, Y. W. (author), You, L. (author), He, Z. B. (author), Wu, C. M. (author), Eskin, D. G. (author), Katgerman, L. (author), Zhuang, L. Z. (author), Zhang, J. S. (author)The retrogression and re-aging (RRA) processes, aimed mainly at tailoring intergranular precipitates, could significantly improve the corrosion resistance (i.e., stress corrosion cracking resistance) without considerably decreasing the strength, which signifies that an efficient control of the size, distribution and evolution of intergranular...journal article 2022
- document
-
Wang, Yawen (author), Hou, Longgang (author), Su, Hui (author), Tian, Qingkun (author), Yu, Kangcai (author), Eskin, Dmitry (author), Katgerman, L. (author), Zhuang, Linzhong (author)The alloy design and homogenization processes are intimately associated with the microstructure, phase composition and performance for Al-Zn-Mg-Cu alloys. The microstructures and phase composition of a series of Al-Zn-Mg-Cu alloys before and after the homogenization treatments were investigated along with thermodynamic calculation to...journal article 2022
- document
-
Gao, Peng (author), Ye, G. (author), Huang, Haoliang (author), Qian, Zhiwei (author), Schlangen, E. (author), Wei, Jiangxiong (author), Yu, Qijun (author)A structure-based modelling framework was established to simulate the three-dimensional autogenous shrinkage of cement paste. A cement hydration model, HYMOSTRUC3D-E, was used to obtain the microstructures and ionic concentrations of the cement paste. A lattice fracture model based on the effective stress and effective modulus was used to...journal article 2022
- document
-
Gebregiorgis, A.B. (author), Du Nguyen, H.A. (author), Yu, J. (author), Bishnoi, R.K. (author), Taouil, M. (author), Franky, Catthoor (author), Hamdioui, S. (author)Faster and cheaper computers have been constantly demanding technological and architectural improvements. However, current technology is suffering from three technology walls: leakage wall, reliability wall, and cost wall. Meanwhile, existing architecture performance is also saturating due to three well-known architecture walls: memory wall,...journal article 2022
- document
-
Yu, G. (author), Rossen, W.R. (author)Foam injection is a promising means of reducing the relative mobility of gas, and hence improving the sweep efficiency of gas, in CO<sub>2</sub> and H<sub>2</sub> storage, soil-contaminant removal in aquifer remediation, enhanced oil recovery, and matrix-acid well stimulation. Theory (Rossen and Gauglitz, 1990; Ashoori et al., 2012) and...journal article 2022
- document
-
Pan, Tanbo (author), Zheng, Yonglai (author), Zhou, Yujue (author), Liu, Yongcheng (author), Yu, Kunlong (author), Zhou, Y. (author)This paper presents the results of an experimental study on the flexural behavior of carbon fibre reinforced polymer (CFRP) anchorage system strengthened reinforced concrete (RC) beams under the coupled effects of corrosion damage and sustained loading. The test beams were subjected to combined accelerated corrosion in 5% NaCl solution and...journal article 2022
- document
-
Yu, Taoyi (author), Khaloian, Ani (author), van de Kuilen, J.W.G. (author)Timber is one of the most widely applied engineering materials due to its favorable physical and mechanical characteristics. Nevertheless, over the service life, the combination of mechanical load and varying environmental conditions can have a critical influence on the mechanical response of timber structures, considering especially the...journal article 2022