Searched for: %2520
(1 - 20 of 20)
document
Sun, Y. (author), Chen, B. (author), Zhang, Shizhe (author), Blom, C.B.M. (author), Lukovic, M. (author), Ye, G. (author)
With the development of waste recovery techniques, previous research has revealed that coarse fractions of municipal solid waste incineration (MSWI) bottom ash (BA) after proper treatment could be applied in the construction sector, while the fines are seldom recovered in practice and normally landfilled. This study explores the potential...
journal article 2024
document
Zhang, Shizhe (author), Ye, G. (author), Lukovic, M. (author), Hendrik, H. (author), Scharringa, A. (author)
In Nederland wordt veel aandacht besteed aan geopolymeerbeton als een van de mogelijkheden om de CO₂-voetafdruk van beton te verlagen. Hoewel dit materiaal op laboratoriumschaal uitgebreid is onderzocht, zijn praktische toepassingen en ervaringen nog maar beperkt beschikbaar. Bovendien bestaan er voor een brede en grootschalige constructieve...
journal article 2022
document
Sun, Yubo (author), Chen, B. (author), Zhang, Shizhe (author), Blom, Kees (author), Lukovic, M. (author), Ye, G. (author)
In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...
conference paper 2021
document
Lukovic, M. (author), Ye, G. (author), Schlangen, E. (author), van Breugel, K. (author)
Infrastructure is ageing and we are facing a serious challenge on how to deal with it. One possible solution is to repair it, but the life of current concrete repairs, including all types of repairs and application of different materials, is not satisfactory and there is an urgent need for improvement. Understanding the damage development in a...
conference paper 2019
document
Chen, B. (author), Sun, Yubo (author), Jacquemin, Loic (author), Zhang, Shizhe (author), Blom, Kees (author), Lukovic, M. (author), Ye, G. (author)
At present, most municipal solid waste incineration (MSWI) bottom ash, as being disposed of as waste, is directly landfilled, raising concern about the environmental issue and potential loss of resources. Given that the natural raw materials used for cement production are being depleted, the recycling of MSWI bottom ash for the application as...
conference paper 2019
document
Prinsse, S. (author), Hordijk, D.A. (author), Ye, G. (author), Lagendijk, P. (author), Lukovic, M. (author)
This paper presents an experimental study on the development of material properties over time (up to around 2 years) and the structural behavior of reinforced beams, for two types of alkali-activated concrete (AAC). Compressive strength, flexural strength, tensile splitting strength, elastic modulus, and flexural behavior of reinforced beams...
journal article 2019
document
Ye, G. (author), Lukovic, M. (author), Ghiassi, B. (author), Aldin, Zainab (author), Prinsse, Silke (author), Liu, Jonh (author), Nedeljković, Marija (author), Hordijk, D.A. (author), Lagendijk, P. (author), Bosman, A. (author), Blom, T.A. (author), van Leeuwen, M. (author), Huang, Zhekang (author), Celada, Ulric (author), Du, C. (author), van den Berg, J.A.M. (author), Thijssen, A. (author), Wijte, Simon (author)
The sustainability of infrastructure projects is becoming increasingly important issue in engineering practice. This means that in the future the construction materials will be selected on the basis of the contribution they can make to reach sustainability requirements. Geopolymers are materials based on by-products from industries. By using...
journal article 2019
document
Nedeljković, Marija (author), Lukovic, M. (author), van Breugel, K. (author), Hordijk, D.A. (author), Ye, G. (author)
This paper presents a development of a ductile alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) based composite as an environmentally friendly material for structural concrete application. For this purpose, polyvinyl alcohol (PVA) fibres and sand aggregate were combined with alkali-activated paste. Workability,...
journal article 2018
document
Nedeljković, Marija (author), Šavija, B. (author), Zuo, Y. (author), Lukovic, M. (author), Ye, G. (author)
The aim of this paper was to investigate the effect of natural carbonation on the pore structure, and elastic modulus (E<sub>m</sub>) of alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) pastes after one year of exposure in the natural laboratory conditions. The chemical changes due to carbonation were examined by...
journal article 2018
document
Aldin, Zainab (author), Nedeljković, Marija (author), Lukovic, M. (author), Liu, Jiahua (author), Blom, Kees (author), Ye, G. (author)
conference paper 2017
document
Lukovic, M. (author), Ye, G. (author), Schlangen, E. (author), van Breugel, K. (author)
In concrete repair systems, material properties in the repair material and interface are greatly influenced by the initial moisture content of the concrete (or mortar) substrate. In order to quantify moisture profiles inside the repair system, X-ray absorption was used. Preliminary studies are performed first to determine the absorption rate of...
journal article 2017
document
Lukovic, M. (author), Šavija, B. (author), Ye, G. (author), Schlangen, E. (author), van Breugel, K. (author)
Corrosion of steel reinforcement is the main cause of deterioration in reinforced concrete structures. It can result in cracking and spalling of the concrete cover. After the damaged cover is repaired, reinforcement corrosion might continue and even accelerate. While the development of the corrosion cell is difficult to control, the damage can...
journal article 2017
document
Zheng, Kunpeng (author), Lukovic, M. (author), de Schutter, Geert (author), Ye, G. (author), Taerwe, Luc (author)
This work aims at providing a better understanding of the mechanical properties of the reaction rim in the alkali-silica reaction. The elastic modulus of the calcium alkali silicate constituting the reaction rim, which is formed at the interface between alkali silicate and Ca(OH)2 in a chemically-idealized system of the alkali-silica reaction...
journal article 2016
document
Lukovic, M. (author), Šavija, B. (author), Schlangen, E. (author), Ye, G. (author), van Breugel, K. (author)
Differential shrinkage between repair material and concrete substrate is considered to be the main cause of premature failure of repair systems. The magnitude of induced stresses depends on many factors, for example the degree of restraint, moisture gradients caused by curing and drying conditions, type of repair material, etc. Numerical...
journal article 2016
document
Lukovic, M. (author), Ye, G. (author)
In concrete repair systems, material properties of the repair material and the interface are greatly influenced by the moisture exchange between the repair material and the substrate. If the substrate is dry, it can absorb water from the repair material and reduce its effective water-to-cement ratio (w/c). This further affects the hydration rate...
journal article 2015
document
Lukovic, M. (author), Schlangen, E. (author), Savija, B. (author), Ye, G. (author), Copuroglu, O. (author)
Simulation of mechanical behaviour of heterogeneous materials is only possible if the local properties of the components are known. In recent years nano-indentation is being applied on different levels to obtain local mechanical properties. The aim of this paper is to explore various ways to obtain these properties by combining nano-indentation...
conference paper 2015
document
Lukovic, M. (author), Savija, B. (author), Dong, H. (author), Schlangen, E. (author), Ye, G. (author)
journal article 2014
document
Lukovic, M. (author), Savija, B. (author), Schlangen, E. (author), Ye, G. (author), van Breugel, K. (author)
Differential shrinkage between repair material and concrete substrate is considered to be the main cause of premature failure of repair systems (Martinola, Sadouki et al. 2001, Beushausen and Alexander 2007). Magnitude of induced stresses depends on many factors, for example the amount of restraint, moisture gradients caused by different curing...
conference paper 2014
document
Lukovic, M. (author), Schlangen, H.E.J.G. (author), Ye, G. (author), Savija, B. (author)
Surface roughness of the existing concrete substrate was considered to have the greatest impact on the bond strength in repair systems. However, the influence of this parameter has been subject for debates in recent years. The effect of concrete surface roughness is not quite clear, nor there exist a clear relation between the surface roughness...
conference paper 2013
document
Lukovic, M. (author), Ye, G. (author), Van Breugel, K. (author)
This paper highlights the importance of achieving durable and long-term predictable repair of reinforced concrete structures. The performance of concrete repair in past and current engineering practice, including all types of repair and application of different materials, is often unsatisfactory. One of the reasons for this lays in the fact that...
conference paper 2012
Searched for: %2520
(1 - 20 of 20)