Zinc Reduction/Vaporisation Behaviour from Metallurgical Wastes

The steelmaking industry produces large quantities of zinc-bearing wastes of varying forms that cannot be treated through integrated steelmaking processes. Simultaneously, by-products of the zinc industry containing great amounts of iron and zinc are stored or landfilled. The amount of zinc in these materials is generally below that which is...

Characterization and feasibility studies on complete recovery of rare earths from glass polishing waste

One of the main applications of ceria (CeO ₂ ) is its use in glass polishing. About 16,000 tonnes of rare earth oxides, which is about 10% of total rare earth production, are used for polishing applications. The waste generated in glass polishing contains rare earths, along with other impurities. In this study, two different glass...

Interaction of precipitation with austenite-to-ferrite phase transformation in vanadium micro-alloyed steels

The precipitation kinetics of vanadium carbides and its interaction with the austenite-to-ferrite phase transformation is studied in two micro-alloyed steels that differ in vanadium and carbon concentrations by a factor of two, but have the same vanadium-to-carbon atomic ratio of 1:1. Dilatometry is used for heat-treating the specimens and...

General introduction to critical materials

A growing world population and rising levels of prosperity are driving up the global demand for energy and materials and are increasing the negative impact on the environment. Challenges related to energy use, materials consumption, and climate change are closely intertwined. On the one hand, producing materials consumes about 21% of global...

Substitution case study: Replacing niobium by vanadium in nano-steels

The substitution of critical alloying elements in metals is a strategy to reduce the criticality of materials. Nano-steels are a novel grade of advanced highstrength steels that are suited for application in the chassis and suspension of cars and as fire-resistant steel in high-rise buildings. The high strength and ductility per unit mass make...

VC-precipitation kinetics studied by Small-Angle Neutron Scattering in nano-steels

Nanosteels are used in automotive applications to accomplish resource-efficiency while providing high-tech properties. Quantitative data and further understanding on the precipitation kinetics in Nanosteels can contribute to fulfil this goal. Small-Angle Neutron Scattering measurements are performed on a Fe-C-Mn-V steel, previously heat-treated...

Recovery of cerium from glass polishing waste: A critical review

Ceria is the main component in glass polishing powders due to its special physico-chemical properties. Glass polishing powder loses its polishing ability gradually during usage due to the accumulation of other compounds on the polishing powder or due to changes in the particle size distribution. The recovery of cerium from the glass polishing...

Characterisation of glass polishing waste samples

The present work describes the characterisation of the two different polishing waste samples. The samples were analysed with laser particle size analyser, XRD, XRF, TGA, and SEM. In the sample A, a large amount of calcite (CaCO3) together with silica and aluminosilicates were observed with SEM. In the minerology, only CaCO3, CeO2 and LnO0.65F1.7...

A comparison between ultra-high-strength and conventional high-strength fastener steels: Mechanical properties at elevated temperature and microstructural mechanisms

A comparison is made between the mechanical properties of the ultra-high-strength steel KNDS4 of fastener grade 14.9 and of conventional, high-strength steels 34Cr4 of fastener grade 12.9 and 33B2 of grade 10.9. The results show that the ratio of the yield strength at elevated temperatures to the yield strength at room temperature is higher for...

Preferential nucleation during polymorphic transformations

Polymorphism is the ability of a solid material to exist in more than one phase or crystal structure. Polymorphism may occur in metals, alloys, ceramics, minerals, polymers, and pharmaceutical substances. Unresolved are the conditions for preferential nucleation during polymorphic transformations in which structural relationships or special...

Total variation minimization approach in in-line x-ray phase-contrast tomography

The reconstruction problem in in-line X-ray Phase-Contrast Tomography is usually approached by solving two independent linearized sub-problems: phase retrieval and tomographic reconstruction. Both problems are often ill-posed and require the use of regularization techniques that lead to artifacts in the reconstructed image. We present a novel...

Phase retrieval in in-line x-ray phase contrast imaging based on total variation minimization

State-of-the-art techniques for phase retrieval in propagation based X-ray phase-contrast imaging are aiming to solve an underdetermined linear system of equations. They commonly employ Tikhonov regularization – an L2-norm regularized deconvolution scheme – despite some of its limitations. We present a novel approach to phase retrieval based on...

In-line x-ray phase-contrast tomography and diffraction-contrast tomography study of the ferrite-cementite microstructure in steel

This work presents the development of a non-destructive imaging technique for the investigation of the microstructure of cementite grains embedded in a ferrite matrix of medium-carbon steel. The measurements were carried out at the material science beamline of the European Synchrotron Radiation Facility (ESRF) ID11. It was shown that in-line X...

Austenite nucleation and growth observed on the level of individual grains by three-dimensional X-ray diffraction microscopy

Austenite nucleation and growth is studied during continuous heating using three-dimensional X-ray diffraction (3-D XRD) microscopy at the European Synchrotron Radiation Facility (ESRF) (Grenoble, France). Unique in-situ observations of austenite nucleation and growth kinetics were made for two commercial medium-carbon low-alloy steels (0.21 and...

Multipurpose furnace for in situ studies of polycrystalline materials using synchrotron radiation

We report a multipurpose furnace designed for studies using synchrotron radiation on polycrystalline materials, namely, metals, ceramics, and (semi)crystalline polymers. The furnace has been designed to carry out three-dimensional (3D) x-ray diffraction measurements but can also be used for other types of synchrotron radiation research. The...

Evolving Microstructures in Carbon Steel: A Neutron and Synchrotron Radiation Study