Microstructure Study of Pulsed Laser Beam Welded Oxide Dispersion-Strengthened (ODS) Eurofer Steel

Oxide dispersion-strengthened (ODS) Eurofer steel was laser welded using a short pulse duration and a designed pattern to minimise local heat accumulation. With a laser power of 2500 W and a duration of more than 3 ms, a full penetration can be obtained in a 1 mm thick plate. Material loss was observed in the fusion zone due to metal...

Characterisation of the influence of vanadium and tantalum on yttrium-based nano-oxides in ODS Eurofer steel

Oxide dispersion strengthened (ODS) steels are leading candidates for structural materials in nuclear fission and fusion power plants. Understanding the nature of nano-oxide particles in ODS steels is vital for a better control of the microstructure and mechanical properties to further their applications. In this study, electron microscopy...

Applicability study of pulsed laser beam welding on ferritic–martensitic ODS eurofer steel

Pulsed laser beam welding was used successfully to join the oxide dispersion-strengthened (ODS) Eurofer steel. The joining was conducted with a laser power of 2500 W and a pulsed duration of 4 ms. With the filler material being used, a minor material loss and microvoids were observed in the joint. The microstructure of the fusion zone...

Microstructure characterisation and mechanical properties of ODS Eurofer steel subject to designed heat treatments

The present work deals with oxide dispersion strengthened (ODS) Eurofer steel fabricated by powder metallurgy involving mechanical alloying and spark plasma sintering. A heat treatment route including normalising and tempering was applied to the as-produced steel, based on differential scanning calorimetry (DSC) measurement. The...

Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering

Oxide dispersion strengthened (ODS) steels are considered to be one of the candidate structural materials for advanced nuclear applications due to their high elevated-temperature strength, corrosion resistance, and radiation tolerance. Joining of ODS steels by traditional fusion joining techniques is not applicable, because the melting...

Effect of mechanical alloying and spark plasma sintering on the microstructure and mechanical properties of ODS Eurofer

Oxide dispersion strengthened (ODS)Eurofer steel was prepared via mechanical alloying (MA)and spark plasma sintering (SPS). Different combinations of MA and SPS parameters were adopted in order to optimise the fabrication process. The experimental results show that the sample milled for 30 h, sintered at 1373 K at a pressure of 60 MPa has...