Analysis of the cohesion/adhesion proportion around bitumen-mineral failure interface under tensile loading

The occurrence of cohesive/adhesive hybrid failure at the bitumen-aggregate interface is widely acknowledged, however, the quantitative evaluation of the cohesion/adhesion proportion is relatively weak. This study explored cohesive/adhesive hybrid failure and provided a quantitative analysis of the proportion between cohesion and adhesion....

A Flow Graph-Based Scalable Critical Branch Identification Approach for AC State Estimation Under Load Redistribution Attacks

This article offers a novel perspective on identifying the critical branches under load redistribution (LR) attacks. Compared to the existing literature that is largely disruption-driven and based on dc state estimation, we propose to address the threat from LR attacks on a more fundamental level by modeling and analyzing the circulation of...

TOPS: Technology Options for Coupled Underground Coal Gasification and CO2 Capture and Storage

The TOPS project takes a radical and holistic approach to coupled UCG-CCS, and thus the site selection criteria for the coupled processes, considering both geological, reservoir and process engineering aspects and different end-uses of the produced synthetic gas in order to optimise the whole value chain. In particular, the experimental research...

Frequency and amplitude stabilized terahertz quantum cascade laser as local oscillator

We demonstrate an experimental scheme to simultaneously stabilize the frequency and amplitude of a 3.5 THz third-order distributed feedback quantum cascade laser as a local oscillator. The frequency stabilization has been realized using a methanol absorption line, a power detector, and a proportional-integral-derivative (PID) loop. The amplitude...

Frequency locking of single-mode 3.5-THz quantum cascade lasers using a gas cell

We report frequency locking of two 3.5-THz third-order distributed feedback (DFB) quantum cascade lasers (QCLs) by using methanol molecular absorption lines, a proportional-integral-derivative controller, and a NbN bolometer. We show that the free-running linewidths of the QCLs are dependent on the electrical and temperature tuning coefficients....

High-resolution heterodyne spectroscopy using a tunable quantum cascade laser around 3.5 THz

A frequency tunable terahertz heterodyne spectrometer, based on a third-order distributed feedback quantum cascade laser as a local oscillator, has been demonstrated by measuring molecular spectral lines of methanol (CH3OH) gas at 3.5 THz. By varying the bias voltage of the laser, we achieved a tuning range of ? 1?GHz of the lasing frequency,...

NbN hot electron bolometer mixer at 5.3 THz

We report the sensitivity of a superconducting NbN hot electron bolometer mixer integrated with a tight spiral antenna at 5.3 THz. Using a measurement setup with black body calibration sources and a beam splitter in vacuo, and an antireflection coated Si lens, we obtained a double sideband receiver noise temperature of 1150 K, which is 4.5 times...

Noise temperature and beam pattern of an NbN hot electron bolometer mixer at 5.25 THz

We report the measured sensitivities of a superconducting NbN hot electron bolometer (HEB) heterodyne receiver at 5.25 THz. Terahertz (THz) radiation is quasioptically coupled to a HEB mixer with a lens and a spiral antenna. Using a measurement setup with black body calibration sources and a beam splitter in vacuo, and an antireflection coated...

Terahertz heterodyne spectrometer using a quantum cascade laser

A terahertz (THz) heterodyne spectrometer is demonstrated based on a quantum cascade laser (QCL) as a local oscillator (LO) and an NbN hot electron bolometer as a mixer, and it is used to measure high-resolution molecular spectral lines of methanol (CH3OH) between 2.913–2.918 THz. The spectral lines are taken from a gas cell containing methanol...