Bio-safe drinking water with or without chlorine: a review

Drinking water biosafety has become an increasing concern for public health. Chlorination is widely used as the main disinfection strategy worldwide but has clear and well-known byproduct issues. The Netherlands has successfully demonstrated unchlorinated approach for almost 20 years but has not been widely adopted by other countries. To...

Analysis of the microcharacteristics of different kinds of asphalt based on different aging conditions

Asphalt aging often leads to rapid degradation of road performance, which seriously affects the service life of asphalt pavement. Exploring the influence of asphalt oil sources, asphalt grades, and filler types on asphalt microcharacteristics in the asphalt aging process can provide an essential reference to guide asphalt pavement maintenance...

Wave Breaking Induced by Opposing Currents in Submerged Vegetation Canopies

Wave height attenuation in vegetation canopies is often all attributed to the drag force exerted by vegetation, whereas other potential dissipation process is often neglected. Previous studies without vegetation have found that opposing currents can induce wave breaking and greatly increase dissipation. It is not clear if similar process may...

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging....

Effects of onshore and offshore environmental parameters on the leading edge erosion of wind turbine blades: A comparative study

The presence of rain-induced leading edge erosion of wind turbine blades (WTBs) necessitates the development of erosion models. One of the essential parameters for erosion modeling is the relative impact velocity between rain droplets and the rotating blade. Based on this parameter, the erosion damage rate of a WTB is calculated to estimate...

Beam and phase distributions of a terahertz quantum cascade wire laser

We report on both measurements and simulations of the beam profile and wavefront of a single-mode, 3.5?THz quantum cascade wire laser, incorporating a lateral corrugated metal-metal waveguide, 3rd-order distributed feedback grating. The intrinsic wavefront was measured by using a Hartmann wavefront sensor (HWS) without any optical components...

Hot electron bolometer heterodyne receiver with a 4.7-THz quantum cascade laser as a local oscillator

We report on a heterodyne receiver designed to observe the astrophysically important neutral atomic oxygen [OI] line at 4.7448?THz. The local oscillator is a third-order distributed feedback quantum cascade laser operating in continuous wave mode at 4.741?THz. A quasi-optical, superconducting NbN hot electron bolometer is used as the mixer. We...

Frequency and amplitude stabilized terahertz quantum cascade laser as local oscillator

We demonstrate an experimental scheme to simultaneously stabilize the frequency and amplitude of a 3.5 THz third-order distributed feedback quantum cascade laser as a local oscillator. The frequency stabilization has been realized using a methanol absorption line, a power detector, and a proportional-integral-derivative (PID) loop. The amplitude...

Frequency locking of single-mode 3.5-THz quantum cascade lasers using a gas cell

We report frequency locking of two 3.5-THz third-order distributed feedback (DFB) quantum cascade lasers (QCLs) by using methanol molecular absorption lines, a proportional-integral-derivative controller, and a NbN bolometer. We show that the free-running linewidths of the QCLs are dependent on the electrical and temperature tuning coefficients....

High-resolution heterodyne spectroscopy using a tunable quantum cascade laser around 3.5 THz

A frequency tunable terahertz heterodyne spectrometer, based on a third-order distributed feedback quantum cascade laser as a local oscillator, has been demonstrated by measuring molecular spectral lines of methanol (CH3OH) gas at 3.5 THz. By varying the bias voltage of the laser, we achieved a tuning range of ? 1?GHz of the lasing frequency,...

Terahertz heterodyne spectrometer using a quantum cascade laser

A terahertz (THz) heterodyne spectrometer is demonstrated based on a quantum cascade laser (QCL) as a local oscillator (LO) and an NbN hot electron bolometer as a mixer, and it is used to measure high-resolution molecular spectral lines of methanol (CH3OH) between 2.913–2.918 THz. The spectral lines are taken from a gas cell containing methanol...