RILEM TC 247-DTA round robin test: carbonation and chloride penetration testing of alkali-activated concretes

Many standardised durability testing methods have been developed for Portland cement-based concretes, but require validation to determine whether they are also applicable to alkali-activated materials. To address this question, RILEM TC 247-DTA ‘Durability Testing of Alkali-Activated Materials’ carried out round robin testing of carbonation...

Waste glass as partial mineral precursor in alkali-activated slag/fly ash system

The feasibility of a waste glass powder residue (GP) from glass recycling as partial mineral precursor to produce alkali-activated materials is investigated. GP served as powder coal fly ash (PCFA) replacement within a reference system composed of 50% PCFA and 50% ground granulated blast furnace slag (GGBS). Compared with PCFA, GP was better...

A Review on the Durability of Alkali-Activated Fly Ash/Slag Systems: Advances, Issues, and Perspectives

Alkali-activated materials (AAMs) have high potential as alternative binder to ordinary portland cement (OPC), because of their high performance beside lower CO₂ emissions. While there is a general consensus about their strength advantages over OPC, there is a widespread debate regarding their durability. Some groups believe that...

Thermodynamic modeling and experimental study of alkali-activated slag paste

A newly developed thermodynamic approach was introduced from the literature to investigate the influence of NaOH content on the hydrate assemblage and chemistry of aqueous solution of activated slag paste (Na2O/slag=4%, 6% and 8%). The ICP-OES test was performed to obtain the aqueous species profiles such as Si, Ca, Al and Na etc. The elemental...

Microstructural and Mineralogical Analysis of Alkali Activated Fly Ash-Slag Pastes

The performances of alkali activated materials (AAM) are strongly related to their microstructures. The microstructure development is mainly affected by chemistry of the primary raw materials. In the present study the influence of different proportions of fly ash and slag (100:0, 70:30, 50:50, 30:70, 0:100 wt.%, named S0, S30, S50, S70, S100,...

Durability of alkali-activated fly ash and slag concrete

Alkali-activated materials (AAM) have received increasing interest during the past few decades due to their environmental and technological advantages. However the durability of these binders is still considered as an unproven issue that needs to be addressed before their commercial adoption and large-scale production. The present work is...