document

USING FLOCCULANTS TO ENCLOSE SILT PARTICLES IN THE PORE VOLUME OF SAND

Mol, J.N. (author)

conference paper 2009

document

Zinc Composite Layers, Incorporating Polymeric Nano-aggregates: Surface Analysis and Electrochemical Behavior

Koleva, D.A. (author), Zhang, X. (author), Petrov, P. (author), Boshkov, N. (author), Van Breugel, K. (author), De Wit, J.H.W. (author), Mol, J.M.C. (author), Tsvetkova, N. (author)

This study reports on a comparative investigation of the corrosion behavior of zinc (Zn) and nano-composite zinc (ZnC) galvanic layers in 5% NaCl solution. The metallic matrix of the ZnC layers incorporates nano-sized, stabilized polymeric aggregates, formed from the amphiphilic tri-block co-polymer: poly(2-hydroxyethyl methacrylate) - poly ...

journal article 2008

document

A Pull-in Based Test Mechanism for Device Diagnostic and Process Characterization

Rocha, L.A. (author), Mol, L. (author), Cretu, E. (author), Wolffenbuttel, R.F. (author), Machado da Silva, J. (author)

A test technique for capacitive MEMS accelerometers and electrostatic microactuators, based on the measurement of pull-in voltages and resonance frequency, is described. Using this combination of measurements, one can estimate process-induced variations in the device layout dimensions as well as deviations from nominal value in material...

journal article 2008

document

Syntheserapport Compartimenteringstudie

Mol, R. (author), Meulepas, G.J. (author)

report 2008

document

Give-to-Get: Free-riding-resilient Video-on-Demand in P2P Systems

Mol, J.J.D. (author), Pouwelse, J.A. (author), Meulpolder, M. (author), Epema, D.H.J. (author), Sips, H.J. (author)

Centralised solutions for Video-on-Demand (VoD) services, which stream pre-recorded video content to multiple clients who start watching at the moments of their own choosing, are not scalable because of the high bandwidth requirements of the central video servers. Peer-to-peer (P2P) techniques which let the clients distribute the video content...

conference paper 2008

document

Read-out calibration of a SOI capacitive transducer using the pull-in voltage

Mol, L. (author), Rocha, L.A. (author), Cretu, E. (author), Wolffenbuttel, R.F. (author)

journal article 2008

document

Analytical model for mesh-based P2PVoD

Lu, Y (author), Mol, JJD (author), Kuipers, F.A. (author), Van Mieghem, P.F.A. (author)

conference paper 2008

document

A Combined Electrochemical and Microstructural Analysis of Model AlMgSi(Cu) Alloys

Zhan, H. (author), Mol, J.M.C. (author), Terryn, H.A. (author), De Wit, J.H.W. (author)

Application prospects in automotive and aerospace industry have led to extensive studies on AA6xxx alloys in recent years because of their attractive combinations of properties. The benefits include formability, weldability, high strength to weight ratio and low cost. The main alloying elements in the commercial AA6xxx are Mg, Si, Fe and Cu. Mg...

journal article 2007

document

Numeriek modelonderzoek naar de reductie van de neer in de monding van de voorhaven van IJmuiden

Bijlsma, A.C. (author), Mol, A.C.S. (author), Winterwerp, J.C. (author)

report 2007

document

Logistics of empty marine containers. A research on strategies for port planning, concerning the storage and flow of empty marine containers in the port of Rotterdam (summary)

Mol, S.J. (author)

master thesis 2007

document

Logistics of empty marine containers. A research on strategies for port planning, concerning the storage and flow of empty marine containers in the port of Rotterdam

Mol, S.J. (author)

master thesis 2007

document

Localized Corrosion of Chromium Coated Steel

Zhang, X. (author), Beentjes, P. (author), Mol, A. (author), Terryn, H. (author)

In this paper, we report on the studies of the local corrosion behaviour of chromium-coated ultra low carbon steel in NaCl solution using polarization, electrochemical impedance spectroscopy (EIS) and SVET.

journal article 2006

document

Pre-distorted sinewave-driven parallel-plate electrostatic actuator for harmonic displacement

De Graaf, G. (author), Mol, L. (author), Rocha, L.A. (author), Cretu, E. (author), Wolffenbuttel, R.F. (author)

journal article 2005

document

Wave attenuation by vegetation

Mol, A.C.S. (author)

Measurements have been carried out at the Paulinaschor, a salt marsh in the Westerschelde, to obtain information of the effect of vegetation on wave attenuation. The data have been analyzed. It appears that wave height is strongly reduced by the vegetation, especially for low water depths. Further analysis of the data has been done, to achieve...

report 2003

document

Filiform corrosion of aluminium alloys: The effect of microstructural variations in the substrate

Mol, J.M.C. (author)

doctoral thesis 2000

document

Omgevingskwaliteit van de binnenstad, waardering voor de winkelomgeving: De aantrekkingskracht van binnenstedelijk vastgoed

De Lange, R.B. (author), Mol, A.C. (author)

book 1999

document

Reducing cost of offshore removal transport: reducing platform abandonment transport costs by applying risk based, removal specific, transport design criteria (summary)

Mol, M.G. (author)

master thesis 1998

document

Reducing cost of offshore removal transport: reducing platform abandonment transport costs by applying risk based, removal specific, transport design criteria

Mol, M.G. (author)

master thesis 1998

document

Wind-, golf-, en stromingsgeïnduceerd sedimenttransport in kribvakken langs de Waal

Lenders, Roger (author), van Maren, Bas (author), Mol, Jan-Willem (author)

Kribvakmetingen Druten/Ochten juli 1996 tot april 1997. Onderzoek naar de sedimenthuishouding van een viertal kribvakken langs de Waal. Het onderzoek betreft een studie naar de hydrodynamische invloed van scheepvaart op de sedimenthuishouding en de invloed van eolisch zandtransport op de sedimenthuishouding in vier kribvakken langs de Waal. Het...

report 1998

document

Calculation of transport forces, jacket flexibility, forces during sagging / hogging waves and feasibility of jacket placement on the braces

Mol, M.G. (author)

report 1998