Searched for: %2520
(1 - 20 of 143)

Pages

document
Xie, J. (author), Xu, Y. (author), Meng, Z. (author), Liang, M. (author), Wan, Z. (author), Šavija, B. (author)
Auxetic cementitious cellular composites (ACCCs) exhibit desirable mechanical properties (e.g., high fracture resistance and energy dissipation), due to their unique deformation characteristics. In this study, a new type of cementitious auxetic material, referred to as peanut shaped ACCC, has been designed and subsequently architected using...
journal article 2024
document
Wan, Z. (author), Xu, Y. (author), Chang, Z. (author), Liang, M. (author), Šavija, B. (author)
Vascular self-healing concrete (SHC) has great potential to mitigate the environmental impact of the construction industry by increasing the durability of structures. Designing concrete with high initial mechanical properties by searching a specific arrangement of vascular structure is of great importance. Herein, an automatic optimization...
journal article 2024
document
Liang, M. (author), Luzio, Giovanni Di (author), Schlangen, E. (author), Šavija, B. (author)
This study presents comprehensive numerical modeling methods for simulating early-age stress (EAS) relaxation in cementitious materials, based on the autogenous deformation (AD), elastic modulus, creep, and stress continuously tested by a mini temperature stress testing machine (Mini-TSTM) and a mini AD testing machine from a very early age ...
journal article 2024
document
Zhang, S. (author), Liang, Yaxin (author), Yang, Cai (author), Venema, Paul (author), Rietveld, L.C. (author), Heijman, Sebastiaan (author)
A large decrease in permeability is often observed during the filtration of nano-sized colloids, while fouling is widely regarded as the main explanation for this phenomenon. The osmotic pressure or concentration polarization (CP) of colloids can also contribute to the flux decline. However, the contribution of CP to flux loss cannot be...
journal article 2024
document
Adwani, Dheeraj (author), Pipintakos, Georgios (author), Mirwald, Johannes (author), Wang, Yudi (author), Hajj, Ramez (author), Guo, Meng (author), Liang, Meichen (author), Jing, R. (author), Varveri, Aikaterini (author)
Oxidative aging induces significant stiffening of asphalt binders that leads to a pronounced reduction in the overall durability of asphalt pavements. The strategic implementation of antioxidant additives provides a potential solution to alleviate this issue. This work presents results from the second phase of the global consortium for...
journal article 2024
document
Gan, Yidong (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)
This study employs a lattice fracture model to simulate static and fatigue fracture behaviour of Interfacial Transition Zone (ITZ) at microscale and mortar at mesoscale. The heterogeneous microstructure of ITZ and mesostructure of mortar are explicitly considered in the models. The initial step involves calibrating and validating the...
journal article 2024
document
Lu, T. (author), Wang, Ruizhi (author), Tang, Z. (author), Zou, Yiwei (author), Yue, X. (author), Liang, Yansong (author), Gong, Haoran (author), Liu, Shurui (author), Chen, Zhiyuan (author), Liu, Xun (author), Du, S. (author)
This article presents a 10mV-startup-voltage thermoelectric energy harvesting system, assisted by a piezoelectric generator (PEG) as a cold starter. It exploits the fact that when a thermoelectric energy harvesting system is implemented in a place where kinetic energy is also present, the PEG starter can provide a clock signal to start the...
journal article 2024
document
Shi, Zhanchong (author), Liang, M. (author), Su, Qingtian (author), Kanstad, Terje (author), Ferrara, Liberato (author)
Rebar-reinforced coarse aggregate ultra-high-performance concrete (R-CA-UHPC) has been used in the construction of new structures and strengthening of deteriorated aged infrastructures, and it inevitably sustains tension. To study the tensile behavior of R-CA-UHPC members, axial tensile tests for dog-bone-shaped specimens were designed and...
journal article 2024
document
Zhu, Qi (author), Guo, Huadong (author), Zhang, Lu (author), Liang, Dong (author), Wu, Zherong (author), de Roda Husman, S. (author), Du, Xiaobing (author)
Surface melt plays a vital role in impacting the polar mass balance and global sea level rise. Over the past decades, synthetic aperture radar (SAR) imagery has garnered considerable attention due to its capacity to provide high-precision and long-term information. However, the traditional SAR-based large-scale surface melt detection methods...
journal article 2024
document
Zhou, Y. (author), Liang, M. (author), Yue, X. (author)
Large errors can be introduced in traditional acoustic emission (AE) source localization methods using extracted signal features such as arrival time difference. This issue is obvious in the case of irregular structural geometries, complex composite structure types or presence of cracks in wave travel paths. In this study, based on a novel...
journal article 2023
document
Liang, M. (author), Liu, C. (author), Liang, X. (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)
This paper investigates the influence of temperature on autogenous deformation and early-age stress (EAS) evolution in ordinary Portland cement paste using a recently developed Mini Temperature Stress Testing Machine (Mini-TSTM) and Mini Autogenous Deformation Testing Machine (Mini-ADTM). In the Mini-TSTM/ ADTM, CEM I 42.5 N paste with a...
journal article 2023
document
Hou, Yueqi (author), Liang, Xiaolong (author), Lv, Maolong (author), Yang, Q. (author), Li, Y. (author)
Unmanned Aerial Vehicle (UAV) maneuver strategy learning remains a challenge when using Reinforcement Learning (RL) in this sparse reward task. In this paper, we propose Subtask-Masked curriculum learning for RL (SUBMAS-RL), an efficient RL paradigm that implements curriculum learning and knowledge transfer for UAV maneuver scenarios...
journal article 2023
document
Chang, Z. (author), Liang, M. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)
We propose a new numerical method to analyze the early-age creep of 3D printed segments with the consideration of stress history. The integral creep strain evaluation formula is first expressed in a summation form using superposition principle. The experimentally derived creep compliance surface is then employed to calculate the creep strain...
journal article 2023
document
Chang, Z. (author), Liang, M. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Cementitious materials may exhibit significant creep at very early age. This is potentially important for concrete 3D printing, where the material is progressively loaded even before it sets. However, does creep actually affect the buildability of 3D printed concrete? Herein, the influence of early-age creep on the buildability of 3D printed...
journal article 2023
document
Zhu, Hangyu (author), Wang, R. (author), Jin, Yaochu (author), Liang, K. (author)
Federated learning (FL) is an emerging privacy preserving machine learning protocol that allows multiple devices to collaboratively train a shared global model without revealing their private local data. Nonparametric models like gradient boosting decision trees (GBDTs) have been commonly used in FL for vertically partitioned data. However,...
journal article 2023
document
Liang, Hongping (author), Guo, Xin (author), Guo, Lanpeng (author), Liu, Siying (author), Zhan, Qiuqiang (author), Yang, Haihong (author), Li, Hao (author), de Rooij, Nicolaas Frans (author), Lee, Yi Kuen (author), French, P.J. (author), Wang, Yao (author), Zhou, Guofu (author)
Constructing near-infrared light (NIR) light-enhanced room temperature gas sensors is becoming more promising for practical application. In this study, learning from the structure and photosynthetic process of chlorophyll thylakoid membranes in plants, the first “Thylakoid membrane” structural formaldehyde (HCHO) sensor is constructed by...
journal article 2023
document
Liang, Y. (author), Yang, Jianan (author), Zhang, Lixian (author), Baldi, S. (author), De Schutter, B.H.K. (author)
journal article 2023
document
Liu, C. (author), Liang, X. (author), Chen, Y. (author), Li, Z. (author), Ye, G. (author)
In this study, the impacts of tap water immersion on the pore solution, phase assemblages, gel chemistry and structure, and pore structure of alkali-activated slag (AAS) pastes were studied. AAS degrades under such condition and the potential mechanisms can be concluded as lower reaction rates, gel decomposition and carbonation. The leaching...
journal article 2023
document
He, S. (author), Chen, Y. (author), Liang, M. (author), Yang, En-Hua (author), Schlangen, E. (author)
This study investigates the microstructural changes of cement paste due to the inclusion of polymeric microfiber at different water-to-cement (w/c) ratios. A procedure to quantify the porosity of epoxy impregnated interfacial transition zone (ITZ) is also presented. Results show that the microstructures of the ITZ beneath and above a...
journal article 2023
document
Li, Tiantian (author), Liang, Hongjing (author), Wu, Bin (author), Lan, Dongming (author), Ma, Yunjian (author), Hollmann, F. (author), Wang, Yonghua (author)
Unspecific peroxygenases (UPOs) represent an emerging class of catalysts for the selective oxyfunctionalisation of C–H- and C = C groups. Until now, only a few UPOs have been characterised. In this study, we report a new peroxygenase identified from the Unspecific Peroxygenase Database. The UPO from Agaricus bisporus var. bisporus (AbvbUPO)...
journal article 2023
Searched for: %2520
(1 - 20 of 143)

Pages