Searched for: %2520
(41 - 60 of 207)

Pages

document
Wüthrich, D. (author), Shi, Rui (author), Chanson, Hubert (author)
journal article 2023
document
Liu, Zhengke (author), Ma, Xiaolei (author), Liu, Xiaohan (author), Correia, Gonçalo (author), Shi, Ruifeng (author), Shang, Wenlong (author)
Optimizing battery swapping station (BSS) configuration is essential to enhance BSS’s energy savings and economic feasibility, thereby facilitating energy refueling efficiency of electric taxis (ETs). This study proposes a novel modular battery swapping mode (BSM) that allows ET drivers to choose the number of battery blocks to rent according...
journal article 2023
document
Cheng, Gang (author), Wu, S. (author), Shi, M. (author), Dong, W. (author), Zhu, H. (author), Alonso-Mora, J. (author)
Autonomous navigation of Micro Aerial Vehicles (MAVs) in dynamic and unknown environments is a complex and challenging task. Current works rely on assumptions to solve the problem. The MAV's pose is precisely known, the dynamic obstacles can be explicitly segmented from static ones, their number is known and fixed, or they can be modeled with...
journal article 2023
document
Wang, Xiangyang (author), Shi, Chen (author), Hao, Xiaodi (author), van Loosdrecht, Mark C.M. (author), Wu, Yuanyuan (author)
Wet-chemical approach is widely applied for phosphate recovery from incinerated ash of waste activated sludge (WAS), along with metals removed/recovered. The high contents of both aluminum (Al) and iron (Fe) in WAS-incinerated ash should be suitable for producing coagulants with some waste anions like Cl<sup>−</sup> and SO<sub>4</sub><sup>2−<...
journal article 2023
document
Shi, S. (author), Cheng, Xiaodong (author), Van den Hof, Paul M.J. (author)
Identifiability of a single module in a network of transfer functions is determined by whether a particular transfer function in the network can be uniquely distinguished within a network model set, on the basis of data. Whereas previous research has focused on the situations that all network signals are either excited or measured, we develop...
journal article 2023
document
Ma, Yuanxing (author), Shi, Baobin (author), Ali, Liaqat (author), Bai, Yong (author), Fang, P. (author)
Wire ropes are widely observed in many industries such as marine engineering and civil engineering, as a type of structure that can bear huge axial force. There are various kinds of wire ropes in practical engineering, corresponding to different usage scenarios. This paper focuses on 6 × 36SW + 1WR with a diameter of 16 mm. The axial...
journal article 2023
document
Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)
Continuing from the part 1 (Shi et al., 2022) this paper presents an experimental investigation of transient void fraction and bubble statistics in a highly turbulent breaking bore with Fr<sub>1</sub>=2.4. The measurements were conducted using a combination of dual-tip phase-detection probes and an ultra-high-speed video camera. The enclosed...
journal article 2023
document
Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)
Transient motion, turbulence and bubble dynamics make any velocity quantification extremely difficult in unsteady gas–liquid flows. In the present study, novel Eulerian and Lagrangian techniques of velocimetry were developed, using both intrusive and non-intrusive measurements. The selected unsteady gas–liquid flow was a breaking bore,...
journal article 2023
document
Lyu, X. (author), Negenborn, R.R. (author), Shi, Xiaoning (author), Schulte, F. (author)
Traditionally, terminal operators create an initial berthing plan before the arrival of incoming vessels. This plan involves decisions on when and where to load or discharge containers for the calling vessels. However, disruptive unforeseen events (i.e., arrival delays, equipment breakdowns, tides, or extreme weather) interfere with the...
journal article 2022
document
Shi, Z. (author), Su, Qingtian (author), Veljkovic, M. (author)
In recent years, ultra-high performance concrete (UHPC) has been introduced in the design of orthotropic steel decks (OSD) to reduce the risk of fatigue cracking. To investigate the fatigue behaviour and fatigue damage process of the orthotropic steel-UHPC composite bridge deck, a fullscale specimen was designed and tested under cyclic loading....
conference paper 2022
document
Shi, Qianqian (author), Wang, Ziyuan (author), LI, Boya (author), Hertogh, M.J.C.M. (author), Wang, Shuyi (author)
In the context of carbon peak and carbon neutral policies, low-carbon construction has been the focus of most countries worldwide. As one of the most effective ways to achieve green construction, many countries have launched low-carbon policies to promote the development of prefabrication. However, the effectiveness and influencing factors of...
journal article 2022
document
Zhang, Z. (author), Wu, Chenming (author), Dai, C. (author), Shi, Qingqing (author), Fang, G. (author), Xie, Dongfang (author), Zhao, Xiangjie (author), Liu, Yong Jin (author), Wang, C.C. (author), Wang, Xiu Jie (author)
Despite the recent advances in artificial tissue and organ engineering, how to generate large size viable and functional complex organs still remains as a grand challenge for regenerative medicine. Three-dimensional bioprinting has demonstrated its advantages as one of the major methods in fabricating simple tissues, yet it still faces...
journal article 2022
document
Shi, Ruo yang (author), Chen, Bing hua (author), Wu, Chong wen (author), Wesemann, Luke (author), Hu, Jiani (author), Xu, Jian rong (author), Zhou, Yan (author), Tao, Q. (author), Wu, Lian ming (author)
Left ventricular thrombus (LVT) after acute ST-segment elevation myocardial infarction (STEMI) are generally associated with poorer outcomes for patients at long-term follow-up. We hypothesis that tissue characteristics and strain parameters by cardiac magnetic resonance (CMR) imaging may indicate the interactions of LVT with ventricular...
journal article 2022
document
Nina, Yvan Arosquipa (author), Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)
At hydraulic structures, some strong interactions may develop between fast flowing waters and the air adjacent to the water in motion that enhance the air-water transfer of atmospheric and volatile gases in the flow. In turn, in-stream structures may contribute to the aeration and re-oxygenation during overflow. The present study aims to...
journal article 2022
document
Shi, S. (author), Mazhar, Othmane (author), De Schutter, B.H.K. (author)
For the identification of switched systems with measured states and a measured switching signal, this work aims to analyze the effect of switching strategies on the estimation error. The data is assumed to be collected from globally asymptotically or marginally stable switched systems under switches that are arbitrary or subject to an average...
journal article 2022
document
Hao, Xiaodi (author), Wang, Xiangyang (author), Shi, Chen (author), van Loosdrecht, Mark C.M. (author), Wu, Yuanyuan (author)
Sludge incineration and seawater desalination are two approaches that can be used in the disposal of waste activated sludge (WAS) and for obtaining fresh water. As resource recovery from wastewater treatment and water purification is a topic of particular interest in these times, “water mining” has become a focus of research, with phosphate/P...
journal article 2022
document
Wüthrich, D. (author), Shi, Rui (author), Chanson, Hubert (author)
Breaking bores are commonly observed in a number of natural processes, often associated with the presence of a transient mixture of air and water, with intense recirculation, air bubble entrainment, and splashing. Two-phase flow measurements in such highly unsteady flows cannot be based on long-duration measurements and require novel ensemble...
journal article 2022
document
Guo, Y. (author), Shi, Can (author), Zhao, Chunfa (author), Markine, V.L. (author), Jing, Guoqing (author)
Crumb rubber (CR) has been proposed to apply in the ballast or sub-ballast layer for ballast degradation mitigation and vibration (noise) reduction. The CR can change the ballast layer stiffness, which can affect the train-track-subgrade dynamic performance and cause travel comfort and safety issues. Towards this, this study aims at...
journal article 2022
document
Yang, Zhengxian (author), Shi, Peng (author), Zhang, Yong (author), Li, Z. (author)
Internal curing by superabsorbent polymer (SAP) has been applied in alkali-activated slag (AAS) systems by a few previous studies with the purpose to mitigate the autogenous shrinkage. However, the effects of SAP on other properties of AAS have been rarely studied. In this paper, the workability, strength, permeability, and frost resistance...
journal article 2022
document
Arosquipa Nina, Yvan (author), Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)
On a stepped spillway, the staircase invert profile generates some intense turbulent dissipation during the spill, associated with a significant reduction of kinetic energy, as well as strong self-aeration. The present study focused on the effects of inclined downward steps on the air-water flow properties, flow resistance, and head losses...
journal article 2022
Searched for: %2520
(41 - 60 of 207)

Pages