- document
-
Li, Z. (author), Chang, Weiwei (author), Cui, Tianyu (author), Xu, Dake (author), Zhang, Dawei (author), Lou, Yuntian (author), Qian, Hongchang (author), Song, Hao (author), Mol, J.M.C. (author), Cao, Fahe (author), Gu, Tingyue (author), Li, Xiaogang (author)Microbiologically influenced corrosion of metals is prevalent in both natural and industrial environments, causing enormous structural damage and economic loss. Exactly how microbes influence corrosion remains controversial. Here, we show that the pitting corrosion of stainless steel is accelerated in the presence of Shewanella oneidensis MR...journal article 2021
- document
-
Cutz, L. (author), Tiringer, U. (author), Gilvari, H. (author), Schott, D.L. (author), Mol, J.M.C. (author), de Jong, W. (author)The use of biomass pellets as a source of renewable energy has increased in recent times. However, pellet storage during transportation can compromise their properties, due to fluctuating temperature and humid environments. Here, we show that extended storage of one month at 40 °C and 85% relative humidity causes significant biomass pellet...journal article 2021
- document
-
Mol, Riche (author)Van Iersel, Moulton, and Murakami (2020) proved that a level-2 binary phylogenetic network can be uniquely reconstructed based on the matrix of mulitsets of the distances of the leaves. Using a handful of lemma’s each<br/>describing the steps of identifying cherries, uncontained leaves and blobs in the network, I created an algorithm for...bachelor thesis 2020
- document
-
Mol, K.A.F. (author)The project site is called Hembrug and is located in between Zaandam and Amsterdam. Hembrug used to be a military production site that functioned as the logistic heart of the Stelling van Amsterdam (Dutch defence strategy) since 1895, but lost its original function in 2003 when the Eurometaal factory stopped the ammunition production. Since then...master thesis 2020
- document
-
Gilvari, H. (author), Cutz, L. (author), Tiringer, U. (author), Mol, J.M.C. (author), de Jong, W. (author), Schott, D.L. (author)Biomass pellets provide a pivotal opportunity in promising energy transition scenarios as a renewable source of energy. A large share of the current utilization of pellets is facilitated by intensive global trade operations. Considering the long distance between the production site and the end-user locations, pellets may face fluctuating storage...journal article 2020
- document
-
Visser, P.M. (author), Mol, M.A. (author)Context. A double planet system or planet binary undergoes eclipses that modify the reflective light curve. In the time domain, the eclipse events are fast and weak. This would make their signal difficult to find and recognize in the phase light curve, even for small inclinations when eclipses happen frequently. However, due to the quasiperiodic...journal article 2020
- document
-
Harzheim, Achim (author), Sowa, Jakub K. (author), Swett, Jacob L. (author), Briggs, G. Andrew D. (author), Mol, Jan A. (author), Gehring, P. (author)The power factor of a thermoelectric device is a measure of the heat-to-energy conversion efficiency in nanoscopic devices. Yet, even as interest in low-dimensional thermoelectric materials has increased, experimental research on what influences the power factor in these systems is scarce. Here, we present a detailed thermoelectric study of...journal article 2020
- document
-
Bosboom, J. (author), Mol, M. (author), Reniers, A.J.H.M. (author), Stive, M.J.F. (author), de Valk, C. F. (author)Although commonly used for the validation of morphological predictions, point-wise accuracy metrics, such as the root-mean-squared error (RMSE), are not well suited to demonstrate the quality of a high-variability prediction; in the presence of (often inevitable) location errors, the comparison of depth values per grid point tends to favour...journal article 2020
- document
-
Kosari, A. (author), Visser, P. (author), Tichelaar, F.D. (author), Eswara, S. (author), Audinot, J. N. (author), Wirtz, T. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)This work focuses on the cross-sectional characterization of the protective conversion layer formed on AA2024-T3 by lithium-leaching from a polyurethane coating in a corrosive environment. The layer shows a multi-layered arrangement comprising nanoscopic local phases. Transmission electron microscopy (TEM) and complementary high-resolution...journal article 2020
- document
-
Herrmann, A. (author), Erich, S. J.F. (author), van der Ven, L.G.J. (author), Huinink, H.P. (author), van Driel, W.D. (author), van Soestbergen, M (author), Mavinkurve, A (author), De Buyl, Francois (author), Mol, J.M.C. (author), Adan, O. C.G. (author)The reliability of LEDs decreases in moist environments. One potential gateway of moisture ingress, reducing the product lifetime is the lens. In white LEDs, phosphor particles are embedded into the optical silicone of the lens to convert the blue light emitted by the diode down in frequency and achieve a light output that appears white. In this...journal article 2020
- document
-
Fockaert, L.I. (author), Würger, T. (author), Unbehau, R. (author), Boelen, B. (author), Meißner, R. H. (author), Lamaka, S. V. (author), Zheludkevich, M. L. (author), Terryn, H.A. (author), Mol, J.M.C. (author)Integrated attenuated total reflection – Fourier transform infrared spectroscopy (ATR-FTIR) – Electrochemical impedance spectroscopy (EIS) measurements were used to simultaneously follow chemisorption mechanisms of organic inhibitors as well as their corrosion inhibition efficiency towards magnesium based substrates. Four carboxylic compounds...journal article 2020
- document
-
Fockaert, L.I. (author), Ganzinga-Jurg, Deborah (author), Versluis, Jan (author), Boelen, Berend (author), Bakker, Huib J. (author), Terryn, H.A. (author), Mol, J.M.C. (author)The molecular configuration and chemistry at the zinc/zinc oxide-polyester interface were studied by using two complementary spectroscopic techniques: attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and sum-frequency generation (SFG) spectroscopy. It was shown that ATR-FTIR should be considered as a (3D)...journal article 2020
- document
-
Verkens, Donovan (author), Revilla, Reynier I. (author), Kosari, A. (author), Günyüz, Mert (author), Işıksaçan, Cemil (author), Mol, J.M.C. (author), De Graeve, Iris (author), Terryn, H.A. (author)Aluminum alloy (AA) 3003 is widely used as fin and tube material in heat exchangers. In these heat exchangers, the tube and fin material are brazed together by means of an AA4xxx alloy. In this study, the effect of a simulated brazing step on the microstructure and corrosion behavior of a twin roll casted (TRC) AA3003 was studied. In particular,...journal article 2020
- document
-
Nakhaie, D. (author), Kosari, A. (author), Mol, J.M.C. (author), Asselin, E. (author)The soil corrosion of widely applied galvanized steel structures, such as power transmission towers, must be considered to prevent harm to their structural integrity and to mitigate the high costs associated with early failure. A full two-level factorial design was used to evaluate the relative significance of various influencing factors on the...journal article 2020
- document
-
Kosari, A. (author), Zandbergen, H.W. (author), Tichelaar, F.D. (author), Visser, P. (author), Terryn, H.A. (author), Mol, J.M.C. (author)Identifying corrosion initiation events in metals and alloys demands techniques that can provide temporal and spatial resolution simultaneously. Transmission electron microscopy (TEM) enables one to obtain microstructural and chemical descriptors of materials at atomic/nanoscopic level and has been used in corrosion studies of many metal...review 2020
- document
-
Stepniowski, W.J. (author), Paliwoda, Damian (author), Abrahami, S.T. (author), Michalska-Domańska, M.E. (author), Landskron, Kai (author), Buijnsters, J.G. (author), Mol, J.M.C. (author), Terryn, H.A. (author), Misiolek, Wojciech Z. (author)Self-organized anodization of copper in 0.1 M Na2CO3 electrolyte was studied in order to obtain nanostructured oxide surface on the metal substrate. Linear sweep voltammetry (LSV) revealed that the most suitable voltage range for anodic film formation is from 3 to 31 V. In this range (except between 3 and 7 V), the oxide is formed as nanorods,...journal article 2020
- document
-
Meeusen, M. (author), Zardet, L. (author), Homborg, A.M. (author), Lekka, M. (author), Andreatta, F (author), Fedrizzi, L. (author), Boelen, B (author), Mol, J.M.C. (author), Terryn, H.A. (author)In previous work, the importance of taking the time-domain into account when studying corrosion inhibitor-containing electrochemical systems was highlighted. In this work, odd random phase electrochemical impedance spectroscopy (ORP-EIS) is applied as the electrochemical tool to study the time-effect by the evaluation of the non...journal article 2020
- document
-
Fockaert, L.I. (author), Ankora, M.V.E. (author), van Dam, J.P.B. (author), Pletincx, S. (author), Yilmaz, A. (author), Boelen, B. (author), Hauffman, T. (author), Gonzalez Garcia, Y. (author), Terryn, H.A. (author), Mol, J.M.C. (author)The bonding properties of zirconium- and titanium-based conversion coatings were evaluated using model conversion solutions of H<sub>2</sub>ZrF<sub>6</sub> and H<sub>2</sub>TiF<sub>6</sub> with addition of various organic additives (PAA, PVA, PVP). Macroscopic testing techniques such as contact angle and pull-off adhesion measurements were...journal article 2020
- document
-
Pei, Zibo (author), Zhang, D. (author), Zhi, Yuanjie (author), Yang, Tao (author), Jin, Lulu (author), Fu, Dongmei (author), Cheng, Xuequn (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)The atmospheric corrosion of carbon steel was monitored by a Fe/Cu type galvanic corrosion sensor for 34 days. Using a random forest (RF)-based machine learning approach, the impacts of relative humidity, temperature and rainfall were identified to be higher than those of airborne particles, sulfur dioxide, nitrogen dioxide, carbon monoxide...journal article 2020
- document
-
Li, Y. (author), Pavanram, P. (author), Zhou, J. (author), Lietaert, K. (author), Taheri, P. (author), Li, W. (author), San, H. (author), Leeflang, M.A. (author), Mol, J.M.C. (author), Jahr, H. (author), Zadpoor, A.A. (author)Additively manufacturing (AM) opens up the possibility for biodegradable metals to possess uniquely combined characteristics that are desired for bone substitution, including bone-mimicking mechanical properties, topologically ordered porous structure, pore interconnectivity and biodegradability. Zinc is considered to be one of the promising...journal article 2020