- document
-
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, X. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)In 3D concrete printing, fast structuration is a prerequisite for ideal buildability. This paper aims to study the impact of inorganic additives, i.e., CaCl<sub>2</sub> and gypsum, on structural build-up and very early-age hydration of limestone-calcined clay-cement (LC3) pastes within the first 70–80 min. Results show that, increasing the...journal article 2023
- document
-
He, S. (author), Mustafa, S. (author), Chang, Z. (author), Liang, M. (author), Schlangen, E. (author), Lukovic, M. (author)In the current study, experiments and numerical simulations were carried out to investigate the cracking behavior of reinforced concrete beams consisting of a very thin layer (i.e., 1 cm in thickness) of SHCC in the concrete cover, tension zone. A novel type of SHCC/concrete interface that features a weakened chemical adhesion but an enhanced...journal article 2023
- document
-
Liang, M. (author), Zhang, Y. (author), He, S. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)This study investigated the evolution process of high-volume slag cement (HVSC) paste from a chemo-mechanical standpoint. HVSC specimens with a 70 w.t. % slag replacement rate were studied at various ages. Evolution of phase assemblage, microstructure development, and micromechanical properties were analyzed using TGA/XRD/MIP/SEM-EDS and nano...journal article 2023
- document
-
van Overmeir, A.L. (author), Šavija, B. (author), Bos, F. P. (author), Schlangen, E. (author)With the introduction of 3D concrete printing, research started on how to include reinforcement in 3D printed structures. Initial studies on the implementation of strain hardening cementitious composites (SHCC) as self-reinforcing printable mortars have shown promising results. The development of this new type of SHCC comes with additional...journal article 2023
- document
-
Schlangen, Miek (author), Schlangen, E. (author), van der Goot, Atze Jan (author)Mechanical properties of food products are regularly analysed by tensile tests. The aim of this study was to demonstrate the potential of using advanced tensile testing techniques to better understand the mechanical properties of anisotropic food products, such as meat analogues and certain dairy products. The effects of various tensile...journal article 2023
- document
-
Chang, Z. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)Herein, different kinds of methods for buildability quantification of 3D concrete printing are reviewed, including experimental approaches, analytical modelling, and numerical simulations. A brief introduction on printing process is first given. This discusses the material properties in different stages. Material printability, which...journal article 2023
- document
-
Sayadi, Sina (author), Chang, Z. (author), He, S. (author), Schlangen, E. (author), Mihai, I.C. (author), Jefferson, Anthony (author)This paper describes the development of a discrete lattice model for simulating structures formed from self-healing cementitious materials. In particular, a new approach is presented for simulating time dependent mechanical healing in lattice elements. The proposed formulation is designed to simulate the transient damage and healing behaviour...journal article 2023
- document
-
He, S. (author), Wan, Z. (author), Chen, Y. (author), Jonkers, H.M. (author), Schlangen, E. (author)The current study investigates short-term and long-term crack-healing behaviour of mortars embedded with bacteria-based poly-lactic acid (PLA) capsules under both ideal and realistic environmental conditions. Two sets of specimens were prepared and subjected to different healing regimes, with the first set kept in a mist room for varying...journal article 2023
- document
-
Kamat, Ameya (author), Lubelli, B. (author), Schlangen, E. (author)This paper investigates the leaching behaviour of sodium ferrocyanide, a known crystallisation inhibitor of sodium chloride, which is added to mortars for mitigation of salt decay. Leaching and depletion of the inhibitor is a practical performance related issue that might over time, make the inhibitor less effective against salt decay. In...journal article 2023
- document
-
Xie, J. (author), Xu, Y. (author), Wan, Z. (author), Ghaderiaram, A. (author), Schlangen, E. (author), Šavija, B. (author)The high deformation capacity of auxetic cementitious cellular composites (ACCCs) makes them promising for strain-based energy harvesting applications in infrastructure. In this study, a novel piezoelectric energy harvester (PEH) with ACCCs and surface-mounted PVDF film based on strain-induced piezoelectric mechanisms has been designed,...journal article 2023
- document
-
Nedeljković, Marija (author), Kamat, Ameya (author), Holthuizen, Patrick (author), Tošić, Nikola (author), Schlangen, E. (author), Fennis, Sonja (author)This paper presents the measurement and analysis of energy consumption of a laboratory jaw crusher during concrete recycling. A method was developed to estimate the power requirements of a lab-scale jaw crusher. The impact of material properties on the crusher performance is studied. Eight concrete strength classes (C20/25–C80/95) were...journal article 2023
- document
-
He, S. (author), Lukovic, M. (author), Schlangen, E. (author)In the current study, experiments were carried out to investigate the cracking behaviour of reinforced concrete beams consisting of 1-cm-thick layer of Strain Hardening Cementitious Composite (SHCC) in the concrete cover zone. The hybrid SHCC/concrete beams with different types of interfaces were tested and compared with control reinforced...conference paper 2023
- document
-
Al-Obaidi, S.M.J. (author), He, S. (author), Schlangen, E. (author), Ferrara, Liberato (author)This study investigates the bond-slip behavior of micro steel fibers embedded into an Ultra-High-Performance Concrete (UHPC) matrix as affected by the self-healing of the same matrix in different exposure conditions. The UHPC matrix contains a crystalline admixture as a promoter of the autogenous self-healing specially added to enhance the...journal article 2023
- document
-
Liang, M. (author), He, S. (author), Gan, Yidong (author), Zhang, Hongzhi (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)This paper employs computer vision techniques to predict the micromechanical properties (i.e., elastic modulus and hardness) of cement paste based on an input of Backscattered Electron (BSE) images. A dataset comprising 40,000 nanoindentation tests and 40,000 BSE micrographs was built by express nanoindentation test and Scanning Electron...journal article 2023
- document
-
Liu, Qing feng (author), Shen, Xiao-han (author), Šavija, B. (author), Meng, Zhaozheng (author), Tsang, Daniel C.W. (author), Sepasgozar, Samad (author), Schlangen, E. (author)In circumstances with wastewater and seawater, the behavior of multi-ions including calcium, chloride and others in concrete attracts attention. The present study investigated the multiple mechanisms that could happen under the special field situation above, including calcium leaching, chloride transport and multi-ion coupling. To realize the...journal article 2023
- document
-
Lattice modelling of early-age creep of 3D printed segments with the consideration of stress historyChang, Z. (author), Liang, M. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)We propose a new numerical method to analyze the early-age creep of 3D printed segments with the consideration of stress history. The integral creep strain evaluation formula is first expressed in a summation form using superposition principle. The experimentally derived creep compliance surface is then employed to calculate the creep strain...journal article 2023
- document
-
Chang, Z. (author), Liang, M. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)Cementitious materials may exhibit significant creep at very early age. This is potentially important for concrete 3D printing, where the material is progressively loaded even before it sets. However, does creep actually affect the buildability of 3D printed concrete? Herein, the influence of early-age creep on the buildability of 3D printed...journal article 2023
- document
-
Liang, M. (author), Chang, Z. (author), Zhang, Y. (author), Cheng, H. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)This study aims to experimentally investigate the autogenous deformation and the stress evolution in restrained high-volume ground granulated blast furnace slag (GGBFS) concrete. The Temperature Stress Testing Machine (TSTM) and Autogenous Deformation Testing Machine (ADTM) were used to study the macro-scale autogenous deformation and stress...journal article 2023
- document
-
Chen, Y. (author), Liang, M. (author), Zhang, Y. (author), Li, Z. (author), Šavija, B. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Autogenous shrinkage may be a critical issue concerning the use of limestone-calcined clay-cement (LC3) in high-performance concrete and 3D printable cementitious materials, which have relatively low water to binder (W/B) ratio. Adding an internal curing agent, i.e., superabsorbent polymer (SAP), could be a viable solution in this context....journal article 2023
- document
-
Chang, Z. (author), Liang, M. (author), Xu, Y. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)In this study, an experimental setup to characterize the early-age creep of 3D printable mortar was proposed. The testing protocol comprises quasi-static compressive loading-unloading cycles, with 180-s holding periods in between. An analytical model based on a double power law was used to predict creep compliance with hardening time and...journal article 2023