- document
-
Tissen, L.N.M. (author)3D printing’s rapid technological development is starting to impact the art field because, for the first time, it has become possible to exactly reproduce and reconstruct artworks without any loss of their physical features. Yet, a coherent overview of how 3D printing is used within the art field while paying attention to ethical considerations...book chapter 2022
- document
-
Jackson-Mills, George (author), Blight, A. (author), Barber, Andrew (author), Pickering, Andrew (author), Boyle, J.H. (author), kaddouh, Bilal (author), Richardson, Robert C. (author)Small inspection robots allow for the optimal exploration of environments and the collection of data from challenging areas, particularly where there may be small access points or tight and fragile surroundings. These robots can be custom-built for specific tasks, but the design and assembly process for this can be costly, both in resources and...journal article 2022
- document
-
Tissen, L.N.M. (author), van Veldhuizen, Mané (author)Various types of digital and physical three-dimensional facsimile technologies (e.g., high-definition digital modelling and 3D printing) have entered the art world and have become increasingly important for research and presentation purposes. Yet, studies that go beyond the technical aspects of (3D) facsimile techniques, such as their...journal article 2022
- document
-
Hussain, M.Z. (author), Großmann, Paula F. (author), Kohler, Fabian (author), Kratky, Tim (author), Kronthaler, Laura (author), van der Linden, B. (author), Rodewald, Katia (author), Rieger, Bernhard (author), Fischer, Roland A. (author), Xia, Yongde (author)Direct ink writing technique is used to 3D print Ti-metal–organic framework (MOF) NH<sub>2</sub>-MIL-125 mixed with boehmite dispersal. Pt is also deposited onto 3D-printed monolith using atomic layer deposition (ALD) to offer additional catalytic sites. The Ti-MOF-derived powder sample and the pyrolyzed 3D-printed monolith samples are...journal article 2022
- document
-
Kalisvaart, Gijsbert M. (author), van Velden, Floris H.P. (author), Hernández-Girón, Irene (author), Meijer, Karin M. (author), Ghesquiere-Dierickx, Laura M.H. (author), Brink, Wyger M. (author), Webb, A. (author), de Geus-Oei, Lioe-Fee (author), Slump, Cornelis H. (author), Kuznetsov, D.V. (author), Schaart, D.R. (author), Grootjans, Willem (author)Background: Accuracy and precision assessment in radiomic features is important for the determination of their potential to characterize cancer lesions. In this regard, simulation of different imaging conditions using specialized phantoms is increasingly being investigated. In this study, the design and evaluation of a modular multimodality...journal article 2022
- document
-
Cruz Saldivar, M. (author), Doubrovski, E.L. (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)Bio-inspired composites are a great promise for mimicking the extraordinary and highly efficient properties of natural materials. Recent developments in voxel-by-voxel 3D printing have enabled extreme levels of control over the material deposition, yielding complex micro-architected materials. However, design complexity, very large degrees of...journal article 2022
- document
-
Bolanos Arriola, J. (author), van Oudheusden, A.A. (author), Flipsen, Bas (author), Faludi, Jeremy (author)This guide takes the reader through the 3D Printing for Repair (3DP4R) process. It consists of guidelines and tools to create a 3D printable version of spare parts needed for a product repair. 3D printing a spare part is more than just printing the original part. Instead, it is an iterative process in which the part is analysed, redesigned,...book 2022
- document
-
Dong, J. (author), Lin, P. (author), Putra, N.E. (author), Tümer, N. (author), Leeflang, M.A. (author), Huan, Z. (author), Fratila-Apachitei, E.L. (author), Chang, J. (author), Zadpoor, A.A. (author), Zhou, J. (author)The treatment of femoral nonunion with large segmental bone defect is still challenging. Although magnesium alloys have been considered potential materials for such a treatment, their application is limited by their fast degradation. Adding bioceramic particles into magnesium to form Mg-matrix composites is a promising strategy to adjust...journal article 2022
- document
-
Wan, Z. (author), Xu, Y. (author), Zhang, Y. (author), He, S. (author), Šavija, B. (author)Cracking is one of the main causes for deterioration of concrete structures. Self-healing concrete with 3D-printed vascular networks has excellent potential for autonomous self-healing. This approach is scarcely investigated: no studies have been devoted to the influence of printing parameters on the properties of vascular based self-healing...journal article 2022
- document
-
San, H. (author), Paresoglou, M. (author), Minneboo, M.B. (author), van Hengel, I.A.J. (author), Yilmaz, A. (author), Gonzalez Garcia, Y. (author), Fluit, Ad C. (author), Hagedoorn, P.L. (author), Fratila-Apachitei, E.L. (author), Apachitei, I. (author), Zadpoor, A.A. (author)Nanoparticles (NPs) have high multifunctional potential to simultaneously enhance implant osseointegration and prevent infections caused by antibiotic-resistant bacteria. Here, we present the first report on using plasma electrolytic oxidation (PEO) to incorporate different combinations of reduced graphene oxide (rGO) and silver (Ag) NPs on...journal article 2022
- document
-
Mustapha, K. A. (author), Shikh Anuar, F. (author), Mohd Sa’at, F. A.Z. (author), Zini, N. H.M. (author), Mat Tokit, E. (author), Satishwara Rao, N. (author), Hooman, K. (author), Abdi, Iman Ashtiani (author)In this study, 3D printed open-cell foam were produced and reconstructed from open-cell metal foam structure using a tomography scanning method and two different additive manufacturing technologies. The materials used in the 3D printing were nylon powder and plastic acid. The porous morphology and surface finish of the 3D printed foams were...conference paper 2022
- document
-
Luesutthiviboon, S. (author), Ragni, D. (author), Avallone, F. (author), Snellen, M. (author)This study focuses upon a new permeable topology design concept as an alternative to porous metal foams, for turbulent boundary layer trailing-edge (TBL-TE) noise attenuation. The present permeable topology has unconventional characteristics with respect to the metal foams: a combination of low flow resistivity r and high form drag...journal article 2021
- document
-
Xu, Y. (author), Šavija, B. (author)Conventionally, the properties of cementitious materials are tailored by a simple but efficient method: mixture proportion design. For a given cementitious mixture, the chemical and physical properties of cementitious materials have already been determined. Consequently, the mechanical performance of the hardened cementitious material is...journal article 2021
- document
-
Tissen, L.N.M. (author)This article uses the COVID –19 crisis to re –evaluate the importance of reproductions – 3D prints – for art’s authenticity, and their significance in keeping art museums meaningful in a rapidly changing world. The fixation on ‘auratic experiences’, inherent to artworks’ materiality is integral to contemporary art theory and museum practice,...journal article 2021
- document
-
Malik, Umair (author), Tissen, L.N.M. (author), Vermeeren, A.P.O.S. (author)3D digitization of cultural heritage has long been used to preserve information about cultural heritage (CH) objects such as architecture, art, and artifacts. 3D dissemination of CH objects through technologies such as augmented reality, virtual reality, and 3D printing have impacted the fields of art history and cultural heritage and have...journal article 2021
- document
-
Ritzen, L. (author), Montano, V. (author), Garcia, Santiago J. (author)The use of self-healing (SH) polymers to make 3D-printed polymeric parts offers the po-tential to increase the quality of 3D-printed parts and to increase their durability and damage toler-ance due to their (on-demand) dynamic nature. Nevertheless, 3D-printing of such dynamic poly-mers is not a straightforward process due to their polymer...journal article 2021
- document
-
Bhattacherjee, Shantanu (author), Basavaraj, Anusha S. (author), Rahul, A. V. (author), Santhanam, Manu (author), Gettu, Ravindra (author), Schlangen, E. (author), Chen, Y. (author), Copuroglu, Oguzhan (author), Wang, Li (author)This paper explores the sustainability aspects of binders used in concrete 3D concrete printing. Firstly, a prospective approach to conduct sustainability-assessment based on the life cycle of 3D printed structures is presented, which also highlights the importance of considering the functional requirements of the mixes used for 3D printing....journal article 2021
- document
-
Wu, J. (author), Wang, W. (author), Gao, Xifeng (author)Inspired by natural cellular materials such as trabecular bone, lattice structures have been developed as a new type of lightweight material. In this paper we present a novel method to design lattice structures that conform with both the principal stress directions and the boundary of the optimized shape. Our method consists of two major...journal article 2021
- document
-
Cuellar Lopez, J.S. (author), Plettenburg, D.H. (author), Zadpoor, A.A. (author), Breedveld, P. (author), Smit, G. (author)Various upper-limb prostheses have been designed for 3D printing but only a few of them are based on bio-inspired design principles and many anatomical details are not typically incorporated even though 3D printing offers advantages that facilitate the application of such design principles. We therefore aimed to apply a bio-inspired approach...journal article 2021
- document
-
Putra, N.E. (author), Leeflang, M.A. (author), Minneboo, M.B. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)Extrusion-based 3D printing followed by debinding and sintering is a powerful approach that allows for the fabrication of porous scaffolds from materials (or material combinations) that are otherwise very challenging to process using other additive manufacturing techniques. Iron is one of the materials that have been recently shown to be...journal article 2021