- document
-
Liang, M. (author), Chang, Z. (author), He, S. (author), Chen, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)Early-age stress (EAS) is an important index for evaluating the early-age cracking risk of concrete. This paper encompasses a thermo-chemo-mechanical (TCM) model and active ensemble learning (AEL) for predicting the EAS evolution. The TCM model provides the data for the AEL model. First, based on Fourier's law, Arrhenius’ equation, and rate...journal article 2022
- document
-
Chang, Z. (author), Zhang, Hongzhi (author), Liang, M. (author), Schlangen, E. (author), Šavija, B. (author)This paper explores buildability quantification of randomly meshed 3D printed concrete objects by considering structural failure by elastic buckling. The newly proposed model considers the most relevant printing parameters, including time-dependent material behaviors, printing velocity, localized damage and influence of sequential printing...journal article 2022
- document
-
Sherzer, G. Lifshitz (author), Ye, G. (author), Schlangen, E. (author), Kovler, K. (author)It has been observed that a trench wall embedded in the soil of the Dead Sea has lost strength and is deteriorating due to brine attack. This phenomenon demonstrates that concrete wall structural stability and durability can be seriously endangered. Yet conventional analysis using macroscopic models is considered an oversimplification, as it...journal article 2022
- document
-
Tabatabaeian, A. (author), Liu, Sixin (author), Harrison, Philip (author), Schlangen, E. (author), Fotouhi, M. (author)Recently emerging mechanochromic systems are becoming highly attractive for structural health monitoring (SHM) purposes in various industries, such as civil, wind, and aerospace, to improve the safety and performance of structures. These are based on self-reporting polymer composites which provide a light-weight sensor with an easy-to-read...review 2022
- document
-
Schlangen, E. (author), Liang, M. (author), Šavija, B. (author)The study aims to investigate the mechanism of early-age cracks in different massive concrete structures (i.e. tunnels, bridge foundations and underground parking garages), with the objective of answering the following three specific questions: <br/><br/>1) How does the parameters of concrete proportion mix (e.g. w/c ratio, cementitious...book chapter 2022
- document
-
Nefs, Karsten (author), van Overmeir, A.L. (author), Salet, Theo A.M. (author), Suiker, A. S.J. (author), Šavija, B. (author), Schlangen, E. (author), Bos, Freek (author)Previous research has shown that the material properties of a three-dimensional printed strain hardening cementitious composite (3DP-SHCC) can significantly vary, depending on the printing system with which it is produced. However, limited research has been performed on the reproducibility of hardened mechanical properties under identical...book chapter 2022
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Liang, M. (author), Zhang, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)In this study, the flexural strength and fatigue properties of interfacial transition zone (ITZ) were experimentally investigated at the micrometre length scale. The hardened cement paste cantilevers (150 × 150 × 750 μm<sup>3</sup>) attached to a quartzite aggregate surface were prepared and tested under the monotonic and cyclic load using a...journal article 2022
- document
-
Chang, Z. (author), Liang, M. (author), Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)This research studies the impact of localized damage and deformed printing geometry on the structural failure of plastic collapse for 3D concrete printing (3DCP) using the lattice model. Two different approaches are utilized for buildability quantification: the (previously developed) load-unload method, which updates and relaxes the printing...journal article 2022
- document
-
He, S. (author), Zhang, Shizhe (author), Lukovic, M. (author), Schlangen, E. (author)Strain hardening cementitious composite (SHCC) is a special class of ultra-ductile material which has autogenous self-healing capability due to its intrinsic tight crack widths. To further improve its healing ability, healing agent (HA) can be incorporated in SHCC, enabling it also the autonomous self-healing mechanism. In this study, the...journal article 2022
- document
-
Schlangen, E. (author)This commentary is part of our celebration of 75 years of RILEM, highlighting Materials and Structures most highly influential and cited publications.journal article 2022
- document
-
França de Mendonça Filho, F. (author), Romero Rodriguez, C. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Industries such as metal, ceramics and petrochemicals suffer from high temperature spills. Such events exert a unique form of loading in concrete structures that cannot be accurately simulated by heating of samples in an oven. Calcium aluminate cement (CAC) based concrete is the industry standard for such environment, and while much is known...journal article 2022
- document
-
Chen, Y. (author), He, S. (author), Gan, Y. (author), Copuroglu, Oguzhan (author), Veer, F.A. (author), Schlangen, E. (author)This paper aims to provide a systematical review of the available printing strategies, sustainable cementitious materials and characterization methods for extrusion-based 3D concrete printing (3DCP). The printing strategies, consisting of printing setup, process, and material requirements, were summarized initially. In the material aspect,...journal article 2022
- document
-
Sun, Renjuan (author), Han, Lebing (author), Zhang, Hongzhi (author), Ge, Zhi (author), Guan, Yanhua (author), Ling, Yifeng (author), Schlangen, E. (author), Šavija, B. (author)This paper presents a study on cracking characterization of engineered cementitious composites (ECC) under flexural cyclic load using digital image correlation (DIC) technique. Five stress levels, namely 0.65, 0.75, 0.8, 0.85 and 0.9 of the flexural strength, were applied. Strain map at the side surface was obtained by DIC and used to drive...journal article 2022
- document
-
Nedeljković, Marija (author), Visser, Jeanette (author), Nijland, Timo G. (author), Valcke, Siska (author), Schlangen, Erik (author)In the Netherlands, beside cement replacement with more green cement types, there is also an urgent need for alternative materials for natural sand in new concrete in order to make it circular. Furthermore, the recyclers have raised questions regarding upscaling and the potential of fine recycled concrete aggregates (fRCA) in structural concrete...conference paper 2021
- document
-
Zhang, H. (author), Schlangen, E. (author), Ge, Z. (author), Šavija, B. (author)Properties of concrete are, to a large extent, dependent on the properties of its binding constituent, hydrated cement paste. Therefore, knowledge of properties of hydrated cement paste is crucial for predicting concrete behaviour. This paper presents an experimentally informed approach for modelling elastic and transport properties of cement...conference paper 2021
- document
-
Romero Rodriguez, Claudia (author), Ye, Rui (author), Varveri, Aikaterini (author), Rossi, Emanuele (author), Anglani, Giovanni (author), Antonaci, Paola (author), Schlangen, Erik (author), Šavija, Branko (author)Coupling of carbonation and chlorides ingress mechanisms is very common in concrete under certain exposure conditions such as coastal environments. The aggravation/ mitigation of corrosion by the existence of carbonation lies on the fact that microstructural changes due to carbonation result in changes on the transport properties of the material...conference paper 2021
- document
-
Chen, Y. (author), Copuroglu, Oguzhan (author), Romero Rodriguez, C. (author), França de Mendonça Filho, F. (author), Schlangen, E. (author)For many 3D printed cementitious materials, air voids may play a dominant role in the interlayer bond strength. However, to date, far too little attention has been paid to reveal the air void characteristics in 3D printed cementitious materials. Therefore, to fill this gap, this study attempts to provide an example of systematically...journal article 2021
- document
-
Nedeljković, Marija (author), Schlangen, E. (author), Fennis, Sonja (author)Momenteel wordt gerecycled beton meestal toegepast als wegfundering en daarmee 'gedowncycled'. Dat komt onder meer doordat er geen informatie beschikbaar is over de kwaliteit van het gesloopte beton. Hoogwaardig hergebruik van gerecyclede toeslagmaterialen in nieuwe betonconstructies vereist een strengere kwaliteitscontrole. Aan de TU Delft...journal article 2021
- document
-
Gan, Y. (author), Romero Rodriguez, C. (author), Zhang, Hongzhi (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This paper presents a method to numerically investigate the microstructural effect on the creep behavior of cement paste at the microscale. The lattice fracture model is extended to consider local time-dependent deformations of calcium-silicate-hydrate phases in the cement paste by imposing local forces. The term “experimentally informed...journal article 2021
- document
-
Kamat, Ameya (author), Lubelli, B. (author), Schlangen, E. (author)Sodium chloride (NaCl) is one of the ubiquitous soluble salts in the environment and is responsible for weathering of building materials. The salt weathering is attributed to the stress developed from crystallisation of these salts in pores of the building materials, with supersaturation as the driving force. In the last years, researchers have...conference paper 2021