- document
-
Chen, Y. (author), Zhang, Y. (author), Šavija, B. (author), Copuroglu, Oguzhan (author)Formulation of quaternary blended system containing ordinary Portland cement or clinker, slag, limestone and calcined clay (LC2) appeared to be a viable approach to developing low-clinker cements without severely sacrificing mechanical performance at later ages. This paper investigates the effect of two material parameters, i.e., LC2-to-slag...journal article 2023
- document
-
Liang, M. (author), Chang, Z. (author), Zhang, Y. (author), Cheng, H. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)This study aims to experimentally investigate the autogenous deformation and the stress evolution in restrained high-volume ground granulated blast furnace slag (GGBFS) concrete. The Temperature Stress Testing Machine (TSTM) and Autogenous Deformation Testing Machine (ADTM) were used to study the macro-scale autogenous deformation and stress...journal article 2023
- document
-
Li, Yonghao (author), Zhang, Ning (author), Sun, Renjuan (author), Guan, Yanhua (author), Liu, Lemin (author), Tian, Changjin (author), Ling, Yifeng (author), Zhang, Hongzhi (author), Šavija, B. (author)The performance of engineered cementitious composites (ECCs) under coupled salt freezing and loaded conditions is important for its application on the transportation infrastructure. However, in most of the studies, the specimens were generally loaded prior to the freezing. The influence of sustained load was merely considered. To this end,...journal article 2023
- document
-
Wan, Z. (author), Chang, Z. (author), Xu, Y. (author), Šavija, B. (author)In this paper, optimization of vascular structure of self-healing concrete is performed with deep neural network (DNN). An input representation method is proposed to effectively represent the concrete beams with 6 round pores in the middle span as well as benefit the optimization process. To investigate the feasibility of using DNN for...journal article 2023
- document
-
Chang, Z. (author), Liang, M. (author), Xu, Y. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)In this study, an experimental setup to characterize the early-age creep of 3D printable mortar was proposed. The testing protocol comprises quasi-static compressive loading-unloading cycles, with 180-s holding periods in between. An analytical model based on a double power law was used to predict creep compliance with hardening time and...journal article 2023
- document
-
Chen, Y. (author), Liang, M. (author), Zhang, Y. (author), Li, Z. (author), Šavija, B. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Autogenous shrinkage may be a critical issue concerning the use of limestone-calcined clay-cement (LC3) in high-performance concrete and 3D printable cementitious materials, which have relatively low water to binder (W/B) ratio. Adding an internal curing agent, i.e., superabsorbent polymer (SAP), could be a viable solution in this context....journal article 2023
- document
-
Liang, M. (author), Schlangen, E. (author), Šavija, B. (author)Stress evolution of restrained concrete is directly related to early-age cracking (EAC) potential of concrete, which is a tricky problem that often happens in engineering practice. Due to the global objective of carbon reduction, Ground granulated blast furnace slag (GGBFS) concrete has become a more promising binder comparing with Ordinary...book chapter 2023
- document
-
Tawfek, Abdullah M. (author), Ge, Zhi (author), Yuan, Huaqiang (author), Zhang, Ning (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Guan, Yanhua (author), Šavija, B. (author)The mechanical performance of engineered cementitious composite (ECC) depends greatly on fiber orientation and distribution. In this paper, the effect of fiber orientation on ECC's mechanical properties was investigated using two different casting methods: a flow-induced casting was used to enhance the fiber orientation within ECC mixture and...journal article 2023
- document
-
Liu, Qing feng (author), Shen, Xiao-han (author), Šavija, B. (author), Meng, Zhaozheng (author), Tsang, Daniel C.W. (author), Sepasgozar, Samad (author), Schlangen, E. (author)In circumstances with wastewater and seawater, the behavior of multi-ions including calcium, chloride and others in concrete attracts attention. The present study investigated the multiple mechanisms that could happen under the special field situation above, including calcium leaching, chloride transport and multi-ion coupling. To realize the...journal article 2023
- document
-
Liang, M. (author), He, S. (author), Gan, Yidong (author), Zhang, Hongzhi (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)This paper employs computer vision techniques to predict the micromechanical properties (i.e., elastic modulus and hardness) of cement paste based on an input of Backscattered Electron (BSE) images. A dataset comprising 40,000 nanoindentation tests and 40,000 BSE micrographs was built by express nanoindentation test and Scanning Electron...journal article 2023
- document
-
Sun, Renjuan (author), Bu, Linglai (author), Zhang, Hongzhi (author), Guan, Yanhua (author), Ma, Chuanyi (author), Ge, Zhi (author), Šavija, B. (author)White mud is a solid waste from the papermaking industry, composed mainly of CaCO<sub>3</sub> and residual alkali metal ions (such as Na+, Mg<sup>2+</sup>). In the current study, the feasibility of using white mud as partial replacement of slag in alkali activated materials is explored. The fluidity, setting time, autogenous shrinkage,...journal article 2023
- document
-
Šavija, B. (author)Self-healing concrete has shown excellent potential in improving the durability of (reinforced) concrete structures and reducing the need for their repair and maintenance. This has been further substantiated by several successful full-scale demonstrator projects. Nevertheless, industrial uptake of the technology is lagging behind, mainly due to...conference paper 2023
- document
-
Liang, M. (author), Zhang, Y. (author), He, S. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)This study investigated the evolution process of high-volume slag cement (HVSC) paste from a chemo-mechanical standpoint. HVSC specimens with a 70 w.t. % slag replacement rate were studied at various ages. Evolution of phase assemblage, microstructure development, and micromechanical properties were analyzed using TGA/XRD/MIP/SEM-EDS and nano...journal article 2023
- document
-
Tawfek, Abdullah M. (author), Ge, Zhi (author), Li, Jian (author), Zhang, Kangkang (author), Jiang, Nengdong (author), Shao, Yingxuan (author), Ling, Yifeng (author), Šavija, B. (author)An engineered cementitious composite (ECC) belongs to a type of high-performance fiber-reinforced materials. Fiber alignment causes the anisotropy of such materials. Herein, the influence of the fiber orientation on water and ion penetration into an ECC was studied. Fiber alignment was achieved using an extrusion approach. Water absorption,...journal article 2023
- document
-
Wan, Z. (author), Zhang, Y. (author), Xu, Y. (author), Šavija, B. (author)Additively manufactured vascular networks have great potential for use in autonomous self-healing of cementitious composites as they potentially allow multiple healing events to take place. However, the existence of a vascular tube wall may impede with the healing efficiency if it does not rupture timely to release the healing agent. The...journal article 2023
- document
-
Wan, Z. (author), Xu, Y. (author), Šavija, B. (author)Compared with other self-healing mechanisms, embedding vascular networks in cementitious matrix enables repairing wider cracks and performing multiple healing cycles. For vascular-based self-healing cementitious composites, additive manufacturing (AM) allows fabricating vascular structures with complex geometry. For Fused Filament Fabrication ...book chapter 2023
- document
-
Wang, Chuan (author), Sun, Renjuan (author), Hu, Xinlei (author), Guan, Yanhua (author), Yang, Yingzi (author), Lu, Wei (author), Tian, Jun (author), Zhang, Hongzhi (author), Ge, Zhi (author), Šavija, B. (author)This paper presents a research on the chloride penetration behavior of engineered cementitious composites (ECC) under sustained flexural loads. Three load levels, i.e. 30 %, 60 % and 75 % of the ultimate flexural load were used. Chloride diffusion depth and concentration profile were measured 30, 60 and 150 days after the specimen was exposed...journal article 2023
- document
-
Zhang, H. (author), Jin, Zuquan (author), Jiang, Nengdong (author), Ge, Zhi (author), Schlangen, E. (author), Ling, Yifeng (author), Šavija, B. (author), Wang, Zheng (author)The classically lattice model assumes the local elements behave elastic brittle, neglecting the ductility of the mortar matrix. This leads to the simulated load⁃displacement response more brittle than the realistic. To solve the aforementioned issue, a piece⁃wise approach was introduced to describe the elastic⁃plastic constitutive relation of...journal article 2023
- document
-
Lv, Leyang (author), Luo, Shitao (author), Šavija, B. (author), Zhang, Hongzhi (author), Li, Lin (author), Ueda, Tamon (author), Xing, Feng (author)The particle size distribution (PSD) has a significant influence on the fresh and final properties of cement and its derived products. In this paper, CSA cements with three different mean diameters (D<sub>50</sub>), ranging from 6.04 to 26.62 μm were prepared by milling. The pre-hydration behavior was quantitatively analyzed, including the...journal article 2023
- document
-
Xu, Y. (author), Šavija, B. (author)A composite can have properties much better than the components it is made of. This work proposes a three-dimensional auxetic cementitious-polymeric composite structure (3D-ACPC) which incorporates 3D printed polymeric shell with cementitious mortar. Uniaxial compression experiments are performed on the 3D-ACPC to study their quasi-static...journal article 2023