Searched for: author%3A%22Bijlaard%2C+F.S.K.%22
(1 - 18 of 18)
document
Liu, X. (author), Wang, Yuanqing (author), Ban, Huiyong (author), Liu, Ming (author), Veljkovic, M. (author), Bijlaard, F.S.K. (author)
Application of longitudinally profiled (LP) steel plate in the flange of flexural members may provide a good solution to optimize their mechanical performance and to improve the efficiency of steel use, whilst existing design codes provide no design guidance or prediction methodology for such advanced beams in terms of flexural behaviour. To...
journal article 2020
document
Gil, Beatriz (author), Goñi, Rufino (author), Bijlaard, F.S.K. (author), Bayo, Eduardo (author)
Torsional effects in joints need to be investigated in order to get a complete model of the joint and also to assess the real boundary conditions for the lateral torsional effects in the beams of structural frames. Phenomena such as: torsion, warping, lateral buckling, etc. are usually analysed assuming simplified boundary conditions, namely...
journal article 2019
document
Bijlaard, F.S.K. (author), Veljkovic, M. (author), Shi, Gang (author), Qiang, X. (author)
contribution to periodical 2018
document
Jiang, X. (author), Luo, Chengwei (author), Qiang, X. (author), Zhang, Qilin (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
To investigate the mechanical degradation of the shear properties of glass fiber-reinforced polymer (GFRP) laminates in bridge decks under hygrothermal aging effects, short-beam shear tests were performed following the ASTM test standard (ASTM D790-10A). Based on the coupled hygro-mechanical finite element (FE) analysis method, an inverse...
journal article 2018
document
Akyel, A. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
Modern steel manufacturing techniques make it possible to produce steel with the nominal yield strength up to 1300 MPa for structural purposes. However, the application of very high strength steels is still limited in the civil engineering structures due to lack of knowledge about the effects of the manufacturing process and experimental results...
journal article 2018
document
Teixeira De Freitas, S. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
Full-scale fatigue tests were performed on two retrofitted orthotropic bridge decks (OBDs). The retrofitting systems consist of adding a second steel plate on the top of the existing deck. The aim is to reduce the stresses at the fatigue-sensitive details and therefore extend the fatigue life of the OBD by stiffening the existing deck plate....
journal article 2017
document
Qiang, X. (author), Wu, N. (author), Jiang, X. (author), Bijlaard, F.S.K. (author), Kolstein, M.H. (author)
Purpose – This study aims to reveal more information and understanding on performance and failure mechanisms of high strength steel endplate connections after fire. Design/methodology/approach – An experimental and numerical study on seven endplate connections after cooling down from fire temperature of 550°C has...
journal article 2017
document
Jiang, X. (author), Luo, Chengwei (author), Qiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
The FRP-steel girder composite bridge system is increasingly used in new constructions of bridges as well as rehabilitation of old bridges. However, the understanding of composite action between FRP decks and steel girders is limited and needs to be systematically investigated. In this paper, depending on the experimental investigations of...
journal article 2017
document
Jiang, X. (author), Song, Jie (author), Qiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
Influence of moisture absorption/desorption on the flexural properties of Glass-fibre-reinforced polymer (GFRP) laminates was experimentally investigated under hot/wet aging environments. To characterize mechanical degradation, three-point bending tests were performed following the ASTM test standard (ASTM D790-10A). The flexural properties...
journal article 2016
document
Jiang, X. (author), Qiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
The research presented in this paper is an experimental study and numerical analysis on mechanical behavior of the adhesively-bonded joint between FRP sandwich bridge deck and steel girder. Generally, there are three typical stress states in the adhesively-bonded joint: shear stress, tensile stress, and combination of both. To realize these...
journal article 2016
document
Van Es, S.H.J. (author), Kolstein, M.H. (author), Pijpers, R.J.M. (author), Bijlaard, F.S.K. (author)
This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld toe parameters have been formulated to...
journal article 2014
document
Van Es, S.H.J. (author), Kolstein, M.H. (author), Pijpers, R.J.M. (author), Bijlaard, F.S.K. (author)
Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging from S460 to S1100 in the TIG-dressed condition....
journal article 2014
document
Jiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
Due to various advantages of Fibre-Reinforced Polymer (FRP) decks, the FRP to steel composite bridge system is being increasingly used in new bridge structures as well as rehabilitation projects for old bridges. This paper focuses on the mechanical behaviours and failure modes of the adhesively-bonded joins between FRP sandwich decks and steel...
conference paper 2013
document
Girao Coelho, A.M. (author), Simao, P.D. (author), Bijlaard, F.S.K. (author)
This paper deals with buckling aspects of the design of stepped columns in heavy mill buildings. In these structures, columns have to carry significant axial loads that usually act eccentrically and strength reducing bending moments due to lateral loads. A simple physical model for buckling behaviour analysis is proposed and formulated using the...
conference paper 2012
document
Jiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
Due to various advantages of Fibre-Reinforced Polymer (FRP) decks, the FRP to steel composite girder system is being increasingly used in the construction of new bridges as well as the rehabilitation projects of old bridges. This paper focus on the mechanical behaviors and failure modes of the adhesively-bonded oins between FRP sandwich decks...
conference paper 2012
document
Qiang, X. (author), Bijlaard, F.S.K. (author), Kolstein, M.H. (author)
conference paper 2012
document
Girão Coelho, A.M. (author), Bijlaard, F.S.K. (author)
The design of joints to European standard EN 1993 within the semi-continuous/partially restrained philosophy is restricted to steel grades up to S460. With the recent development of high performance steels, the need for these restrictions should be revisited. The semicontinuous joint modelling can be adopted as long as the joint develops...
journal article 2010
document
Bijlaard, F.S.K. (author)
public lecture 2001
Searched for: author%3A%22Bijlaard%2C+F.S.K.%22
(1 - 18 of 18)