Searched for: author%3A%22Dong%2C+H.%22
(1 - 20 of 20)
document
Gao, Jian (author), Jin, Peng (author), Zhang, Yuze (author), Dong, H. (author), Wang, Ruixing (author)
Due to low activity or long mineralization time, traditional mineral agents for self-healing concrete generally need a long time to achieve a desired repair efficiency. Inspired by epoxy resin AB glue which can consolidate in a short time when mixing the two components together, a novel type of fast-responsive capsules based on two soluble...
journal article 2022
document
Li, Wei (author), Yi, Liming (author), Jiang, Wen (author), Dong, H. (author), Zhang, Yong (author)
This paper presents experimental investigations into the effects of ultrafine blast furnace slag on microstructure improvements against chloride penetration in saturated and unsaturated cementitious systems exposed to cyclic drying–wetting conditions. The hydration kinetics of ultrafine slag powders and pore solution chemistry in slag-blended...
journal article 2022
document
Dong, H. (author), Yao, X. (author), Burgmann, S. (author), Ye, G. (author)
Each year a large amount of construction and demolition waste (CDW) is generated in the European Union. For sustainability development the CDW is recycled and re-used. To promote the use of CDW, recycled aggregates from CDW were incorporated in alkali-activated concrete (AAC), which mainly consisted of secondary materials or industrial by...
conference paper 2021
document
Dong, H. (author), Yao, X. (author), Burgmann, S (author), Ye, G. (author)
Each year a large amount of construction and demolition waste (CDW) is generated in the European Union. For sustainability development the CDW is recycled and re-used. To promote the use of CDW, recycled aggregates from CDW were incorporated in alkali-activated concrete (AAC), which mainly consisted of secondary materials or industrial by...
conference paper 2021
document
Li, Z. (author), Wyrzykowski, Mateusz (author), Dong, H. (author), Zhang, Shizhe (author), Lura, Pietro (author), Ye, G. (author)
Alkali activated slag (AAS) has shown promising potential to replace ordinary Portland cement as a binder material. Synthesized from industrial by-products, AAS can show high strength, thermal resistance and good durability. However, AAS has been reported to exhibit high autogenous shrinkage. Autogenous shrinkage is a critical issue for building...
conference paper 2021
document
Liang, X. (author), Dong, H. (author), Li, Z. (author), van Zijl, Marc Brito (author), Ye, G. (author)
This paper investigated the feasibility of using biomass fly ash (BFA) to prepare alkaliactivated slag and fly ash paste. The reference mixture was alkali-activated slag and coal fly ash (CFA) paste with a slag-to-coal fly ash ratio of 50/50. In other mixtures, coal fly ash was replaced at 40% and 100% with BFA, respectively. The results showed...
conference paper 2021
document
Zhang, H. (author), Romero Rodriguez, C. (author), Dong, H. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Carbonation of hydrated cement paste (HCP) causes numerous chemo-mechanical changes in the microstructure, e.g., porosity, strength, elastic modulus, and permeability, which have a significant influence on the durability of concrete structures. Due to its complexity, much is still not understood about the process of carbonation of HCP. The...
journal article 2020
document
Li, Z. (author), Lu, T. (author), Liang, X. (author), Dong, H. (author), Ye, G. (author)
This study aims to provide a better understanding of the autogenous shrinkage of slag and fly ash-based alkali-activated materials (AAMs) cured at ambient temperature. The main reaction products in AAMs pastes are C-A-S-H type gel and the reaction rate decreases when slag is partially replaced by fly ash. Due to the chemical shrinkage and the...
journal article 2020
document
Li, Z. (author), Wyrzykowski, Mateusz (author), Dong, H. (author), Granja, José (author), Azenha, Miguel (author), Lura, Pietro (author), Ye, G. (author)
In this study, internal curing by superabsorbent polymers (SAP) is utilized to mitigate self-desiccation and autogenous shrinkage of alkali-activated slag (AAS) pastes. Absorption and desorption kinetics of SAP incorporated in AAS pastes were studied with X-ray tomography. Internal curing delayed the peak of the rate of heat liberation but...
journal article 2020
document
Yao, X. (author), Yang, Shizhao (author), Dong, H. (author), Wu, Shuang (author), Liang, X. (author), Wang, Wenlong (author)
Ferric-rich calcium sulfoaluminate (FR-CSA) cement is an eco-friendly cement. Fe<sub>2</sub>O<sub>3</sub> exists in different minerals of FR-CSA clinker, e.g., Ca<sub>4</sub>Al<sub>2</sub>Fe<sub>2</sub>O<sub>10</sub> (C<sub>4</sub>AF), Ca<sub>2</sub>Fe<sub>2</sub>O<sub>5</sub> (C<sub>2</sub>F), and Ca<sub>4</sub>Al<sub>6-2</sub><sub>x</sub>Fe...
journal article 2020
document
Dong, H. (author), Ye, G. (author)
Chloride-induced corrosion is a critical issue for RC structures. Cement-based coatings can be used to protect concrete structures with unsatisfactory quality against chloride ingress. To evaluate the effectiveness of the coatings to extend the service life of coated concrete structures, the evolution of the chloride profile in the coated...
journal article 2019
document
Dong, H. (author), Gao, P. (author), Ye, G. (author)
Drying of cement-based overlay systems is a critical issue, because it causes differential shrinkage between the overlay material and the concrete substrate and may induce cracking or debonding of the overlay material. In this paper the mechanisms of moisture transport in hydrating cement-based overlay systems are studied. A model is proposed...
journal article 2019
document
Dong, H. (author)
Concrete is currently the most widely used material in construction field. A good performance of concrete structures is required for reaching the designed service life. However, the initial scatter in the quality of concrete is unavoidable in practice, possibly resulting from improper design, poor execution, or deterioration due to stresses...
doctoral thesis 2018
document
Dong, H. (author), Zhang, H. (author), Zuo, Y. (author), Gao, P. (author), Ye, G. (author)
Mercury intrusion porosimetry (MIP) measurements are widely used to determine pore throat size distribution (PSD) curves of porous materials. The pore throat size of porous materials has been used to estimate their compressive strength and air permeability. However, the effect of sample size on the determined PSD curves is often overlooked....
journal article 2018
document
Dong, H. (author), Gao, P. (author), Ye, G. (author)
More and more studies are based on digital microstructures of cement pastes obtained either by numerical modelling or by experiments. A comprehensive understanding of the their pore structures, therefore, becomes significant. In this study, the pore structure of a virtual cement paste (HYMO-1d) generated by cement hydration model HYMOSTRUC 3D...
journal article 2017
document
Lukovic, M. (author), Savija, B. (author), Dong, H. (author), Schlangen, E. (author), Ye, G. (author)
journal article 2014
document
Yang, X. (author), Daamen, W. (author), Hoogendoorn, S.P. (author), Chen, Y. (author), Dong, H. (author)
Pedestrian dynamics has been being a popular research area. In this paper, breakdown probability in the bidirectional flow that includes pedestrians with heterogeneities is investigated. Reaction time appears to have the most pronounced breakdown proba- bility, followed by desired velocity and then body size. The relationship between the start...
journal article 2014
document
Du, S. (author), Lin, K. (author), Malladi, S.R.K. (author), Lu, Y. (author), Sun, S. (author), Xu, Q. (author), Steinberger-Wilckens, R. (author), Dong, H. (author)
In this work, we demonstrate an innovative approach, combing a novel active screen plasma (ASP) technique with green chemical synthesis, for a direct fabrication of uniform Pt nanowire arrays on large-area supports. The ASP treatment enables in-situ N-doping and surface modification to the support surface, significantly promoting the uniform...
journal article 2014
document
Dong, H. (author), Huang, H. (author), Ye, G. (author)
Many types of healing agents have been investigated. These agents are processed in different ways, such as adhesive polymer in capsules or hollow fibre glasses, bacteria in porous aggregates and geo-materials directly incorporated in the cementbased materials. In this study, sodium silicate powder is encapsulated in polystyrene particles ...
conference paper 2013
document
Dong, H. (author), Huang, H. (author), Ye, G. (author)
Many types of healing agents have been investigated. These agents are processed in different ways, such as adhesive polymer in capsules or hollow fibre glasses, bacteria in porous aggregates and geo-materials directly incorporated in the cementbased materials. In this study, sodium silicate powder is encapsulated in polystyrene particles ...
conference paper 2013
Searched for: author%3A%22Dong%2C+H.%22
(1 - 20 of 20)