Hot cracking investigation during laser welding of high-strength steels with multi-scale modelling approach

Hot cracking during laser welding of advanced high-strength steels is reported to be a serious problem by automotive manufacturers. In this work, hot cracking susceptibilities of transformation-induced plasticity (TRIP) and dual-phase (DP) steels are studied based on a multi-scale modelling approach. Transient temperatures measured from...

Control of welding distortion during gas metal arc welding of AH36 plates by stress engineering

Welding residual stress and distortion are strongly linked together. One of the ways to control or reduce the welding distortions is the manipulation of the generated stresses during welding, and final residual stresses exist in the workpiece (stress engineering). In this paper, the control of gas metal arc butt welding distortion of 500 × 250 ×...

Design and optimization method for 3D printed carbon reinforced aircraft components

Recent developments in the field of plastic additive manufacturing have seen the introduction of carbon fibres in printed products. These fibres improve the strength and stiffness of the thermoplastic based components. Two approaches are currently seen, the very short fibre embedded in the printing filament and continuous fibres, where the...

The microstructural evolution and elemental distribution of a 3rd generation 1 GPa advanced high strength steel during double pulse resistance spot welding

This paper presents the effects of double pulse resistance spot welding (RSW) on the microstructural evolution, elemental distribution and mechanical properties of a 3rd generation 1 GPa advanced high strength steel (AHSS). In order to investigate the effect of double pulsing, the steel was exposed to single and various double pulse RSW...

Elemental segregation during resistance spot welding of boron containing advanced high strength steels

The partitioning behaviour of carbon, phosphorous and boron during the solidification of a resistance spot weld pool was studied using experimental simulations and a phase field model. Steels with varying carbon, phosphorous and boron contents were designed and subjected to a range of resistant spot welding thermal cycles. Mechanical properties...

Accommodation of Plastic Deformation by Ultrasound-Induced Grain Rotation

Electron backscatter diffraction was used to investigate the softening effect in low-carbon steel [Fe-0.051C-0.002Si-0.224Mn-0.045Al (wt pct)] during tensile deformation with in situ ultrasonic treatment. A bimodal grain size distribution is observed with relatively small equiaxed grains with an average diameter of 10 ?m at the grain boundaries...

Quantitative Analysis of Microstructural Constituents in Welded Transformation-Induced-Plasticity Steels

A quantitative analysis of retained austenite and nonmetallic inclusions in gas tungsten arc (GTA)–welded aluminum-containing transformation-induced-plasticity (TRIP) steels is presented. The amount of retained austenite in the heat-affected and fusion zones of welded aluminum-containing TRIP steel with different base metal austenite fractions...

A Study of Short Circuiting Arc Welding