Numerical parametric evaluation of ultimate resistance of high-strength bolts

High strength bolts are widely used in the engineering field due to their good compressive properties. Accurate assessment of the ultimate capacity performance of high strength bolts under combined loading is essential to ensure the safety of steel structures in the connection zone. Existing studies are not sufficiently clear on the economic...

Mixed-mode fatigue crack propagation simulation by means of G_eq and walker models of the structural steel S355

In this paper, a numerical simulation method of mixed-mode fatigue crack propagation was explored using the extended finite element method (XFEM) and the Virtual Crack Closure Technique (VCCT). Both 2D and 3D numerical models were selected to simulate the fatigue crack propagation of steel specimens. Two coefficients were proposed to...

Strengthening effects evaluation on fatigue damage of rib to deck joint in orthotropic steel deck

Strengthening fatigue damage of orthotropic steel decks (OSDs) needs to comprehensively consider the strengthening effect and the dead weight introduced during the strengthening process, especially for OSDs in super large-span bridges or old renovated bridges, where the dead weight cannot be significantly increased during repair and...

Fracture simulation of welded RHS X-joints using GTN damage model

A welded rectangular hollow section (RHS) X-joint exposed to tension loading has three typical fracture-related failure modes: Punching shear failure (PSF), Brace failure (BF), and Chord side wall failure (CSWF). Prediction of these failure modes by finite element (FE) simulations requires modelling of the material damage. An appropriate...

Evaluating the strength of grade 10.9 bolts subject to multiaxial loading using the micromechanical failure index: MCEPS

Bolted joints in steel structures are generally subject to combined actions. The research on ultimate capacity of bolted joints under combined tension and shear actions, twin shear actions, and combined tension-twin shear actions is relatively limited. The aim of this paper is to calibrate the fracture locus of grade 10.9 bolts using the...

Mesh size effects on fracture locus of high strength bolts: A mesoscale critical equivalent plastic strain (MCEPS) approach

With the improvement of computational capability, finite element simulation is an increasingly practical method to accurately predict the ultimate capacity and ductile fracture behavior of high-strength bolts. However, the mesh size affects the results of FE simulations but related research on mesh size effects is relatively limited. In the...

A method for determining the constitutive model of the heat-affected zone using digital image correlation

The heat-affected zone (HAZ) is an unmelted region of a welded joint that has changed in material properties because of high temperatures during the welding process. HAZ has a lower strength than the base (parent) material (BM) and the weld metal (WM). The lower material strength is more significant if BM is made of high strength steel and...

Ductile fracture simulation of cold-formed high strength steel using GTN damage model

The use of high strength steel (HSS) cold-formed hollow section is of significant interest in the construction sector due to competitive costs. The accurate simulation of ductile fracture failure at the micro and macro scale is critical for improving the validity of predicting structural behaviour of HSS cold-formed hollow sections and welded...

A method for identifying the boundary of regions in welded coupon specimens using digital image correlation

The coupon specimen with a transverse butt weld in the middle could be used for determining local constitutive properties of the heat-affected zone (HAZ) and the weld metal (WM) based on the digital image correlation (DIC). However, limited research is reported to demonstrate how to identify the boundary of each region in DIC results....

Fracture parameters calibration and validation for the high strength steel based on the mesoscale failure index

Accurately obtaining the material parameters of the damage model is very important for the ductile fracture simulation of steel structures made of high strength steel (HSS). The combination of micromechanics with the uncoupled phenomenological fracture model can be used to obtain the material parameters of ductile fracture locus only from the...

Ductile fracture locus identification using mesoscale critical equivalent plastic strain

The ductile performance of high strength steel (HSS) from different steel grades, producers, manufacturing processes varies a lot. It is also difficult to conduct all kinds of reliable experiments to generate different stress status through different initial specimen geometries or by applying different load combinations in the civil...