A Hybrid Modulation Featuring Two-phase Clamped Discontinuous PWM and Zero Voltage Switching for 99% Efficient DC-Type EV Charger

Two-stage AC-DC converters are considered as a prominent solution for DC-type electric vehicle (EV) chargers. However, this kind of architecture suffers from high switching losses with large heatsink and DC-link capacitor volume. To relieve this issue, this paper presents a new hybrid modulation for DC-type EV chargers, where a two-phase...

Optimal Periodic Variable Switching PWM for Harmonic Performance Enhancement in Grid-Connected Voltage Source Converters

Variable switching frequency PWM (VSFPWM) modulation can be advantageously implemented in industrial applications, such as renewable energy, motor drives, and uninterrupted power supply (UPS) systems, to reduce the injected current harmonic amplitudes, to suppress audible noise, and to improve semiconductor power efficiency. In this article,...

Hybrid Si/SiC Switch Modulation with Minimum SiC MOSFET Conduction in Grid Connected Voltage Source Converters

In this article, a hybrid Si/Si carbide (SiC) switch (HyS) modulation with minimum SiC MOSFET conduction (mcHyS) is experimentally characterized, so as to derive its conduction and switching performance. These are later used to derive a silicon (Si) area analytical model for the HyS configuration. The chip area model is used to benchmark the...

A Carrier-based Two-Phase-Clamped DPWM Strategy With Zero-Sequence Voltage Injection for Three-Phase Quasi-Two-Stage Buck-Type Rectifiers

A three-phase buck-type rectifier features a step-down ac-dc conversion function, which is considered as a prominent solution for electric vehicle chargers and telecommunication systems integrated to the grid above 380 V line to line. However, traditional solutions for those applications employ cascaded architectures with an ac-dc boost-type...

A Mode-Switching Based Phase Shift Control for Optimized Efficiency and Wide ZVS Operations in Wireless Power Transfer Systems

This article proposes a mode-switching-based phase shift control (MS-PSC) for wireless power transfer (WPT) systems, which is able to achieve power regulation, load matching, and wide ZVS operations simultaneously without using additional dc-dc converters. Based on the mode transitions between the full-bridge, mixed-bridge, and half-bridge...

Carrier-based Generalized Discontinuous PWM Strategy for Single-Phase Three-Legs Active Power Decoupling Converters

Three-legs active power decoupling (APD) converters are widely studied in the single-phase grid-connected systems to enhance the circuit lifetime by creating an alternative path for the typical existing dc-side power pulsating ripple. Therefore, this reduces the requirement of smoothing dc capacitors allowing compact designs even with the...

Virtual Resistor Active Damping with Selective Harmonics Control of LCL-Filtered VSCs

LCL filter is widely adopted for strict standard compliance of grid-tied voltage source converters (VSCs). The third order low-pass filtering provides great attenuation for the high frequency harmonics generated by the power electronics guaranteeing low output currents noise injection into the grid. A major concern of the implementation of the...