Temperature effects on fatigue delamination behavior in thermoset composite laminates

Temperature can significantly affect fatigue delamination growth (FDG) behavior in composites, while fiber bridging has been frequently reported during FDG. The focus of this study was therefore on investigating temperature effects on FDG behavior with fiber bridging. Mode I fatigue delamination experiments were conducted on a thermoset...

Interlaminar and intralaminar fracture resistance of recycled carbon fibre/PPS composites with tailored fibre/matrix adhesion

The production of advanced composites from recycled carbon fibres (rCFs) is critical for the sustainable development of carbon fibre industry. Herein, non-woven mats consisting of commingled rCFs and Polyphenylene-sulfide (PPS) fibres were compression moulded to manufacture rCF/PPS composites, with the fibre/matrix adhesion being tailored by...

Delamination fatigue growth in polymer-matrix fibre composites: A methodology for determining the design and lifing allowables

The introduction, originally in 2009, by the FAA of a ‘slow growth’ approach to the certification of polymer-matrix fibre composites has focused attention on the experimental data and the analytical tools needed to assess the growth of delaminations under cyclic-fatigue loads. Of direct relevance is the fact that fatigue tests on aircraft...

Thickness effects on fibre-bridged fatigue delamination growth in composites

This paper provides an investigation on thickness effects on fibre-bridged fatigue delamination growth (FDG) in composite laminates. A modified Paris relation was employed to interpret experimental fatigue data. The results clearly demonstrated that both thickness and fibre bridging had negligible effects on FDG behaviors. Both energy...

Fibre bridging effect on the Paris relation for mode I fatigue delamination growth in composites with consideration of interface configuration

Fibre bridging can significantly enhance delamination resistance making the use of a single Paris resistance curve to determine fatigue crack growth insufficient. An empirical Paris-type relation has been developed in a previous study to take fibre bridging into account in fatigue delamination growth. This relation was developed by correlating...

Stress ratio dependence of fiber bridging significance in mode I fatigue delamination growth of composite laminates

This paper aims to investigate stress ratio effect on fibre bridging significance in mode I fatigue delamination growth of composite materials. Fatigue resistance curves (R-curves) of different stress ratios are determined and compared with the quasi-static R-curve. The fatigue R-curve of a high stress ratio is similar to the quasi-static...

Near-infrared optical coherence tomography for the inspection of fiber composites

Optical coherence tomography (OCT) is a non-invasive imaging method, which allows the econstruction of three dimensional depth-resolved images with microscale resolution. Originally developed for biomedical diagnostics, nowadays it also shows a high potential for applications in the field of non-destructive testing (NDT). This work demonstrates...

Mode I fatigue delamination growth in composite laminates with fibre bridging

Advanced composite materials have been commonly used in aerospace engineering, because of their good mechanical properties and attractive potential for creating lightweight structures. Susceptibility to delamination is one of the most important issues in the applications of these materials. This disadvantage can prohibit the application of...

The concept of fatigue fracture toughness in fatigue delamination growth behavior

This paper provides a study on mode I fatigue delamination growth in composite laminates using energy principles. Experimental data has been obtained from fatigue tests conducted on Double Cantilever Beam (DCB) specimens at various stress ratios. A concept of fatigue fracture toughness is proposed to interpret the stress ratio effect in crack...

Energy based study of quasi-static delamination as a low cycle fatigue process

This work proposes to treat quasi-static mode I delamination growth of CFRP as a low-cycle fatigue process. To this end, mode I quasi-static and fatigue delamination tests were performed. An average physical Strain Energy Release Rate (SERR), derived from an energy balance, is used to characterize the energy released in crack extension. The...