Editors' Choice - Dealloying-Driven Cerium Precipitation on Intermetallic Particles in Aerospace Aluminium Alloys

Cerium-based compounds have been studied for decades as non-toxic candidates for the protection of aerospace aluminium alloys (AAs) like AA2024-T3. However, the complex heterogeneous microstructure of these alloys has hindered a thorough understanding of the subsequent stages of corrosion protection provided by this class of inhibitors. Thus,...

Nanoscopic and in-situ cross-sectional observations of Li-based conversion coating formation using liquid-phase TEM

Lithium salts have been proposed as promising environmentally friendly alternatives to carcinogenic hexavalent chromium-based inhibitors for the corrosion protection of aerospace aluminium alloys (AAs). Incorporated into organic coatings, lithium salts are released at damaged locations to establish a conversion layer in which distinct...

Laterally-resolved formation mechanism of a lithium-based conversion layer at the matrix and intermetallic particles in aerospace aluminium alloys

Lithium leaching coatings have recently been developed as eco-friendly active corrosion protection technology for aerospace aluminium alloys (AAs) by the formation of a conversion layer at coating defects. While general conversion layer formation characteristics were studied and reported before, here we study the local layer formation process...

Challenges to electrochemical evaluation of nanometric sandwiched thin specimens using liquid cells designed for application in liquid-phase TEM corrosion studies

Liquid-phase transmission electron microscopy (LP-TEM) has provided corrosion scientists with a unique opportunity to directly correlate nanoscopic morphological and compositional evolutions to the corresponding electrochemical response of corroding thin TEM specimens. Electrochemical liquid cell designs are key components of a LP-TEM study...

Cross-sectional characterization of the conversion layer formed on AA2024-T3 by a lithium-leaching coating

This work focuses on the cross-sectional characterization of the protective conversion layer formed on AA2024-T3 by lithium-leaching from a polyurethane coating in a corrosive environment. The layer shows a multi-layered arrangement comprising nanoscopic local phases. Transmission electron microscopy (TEM) and complementary high-resolution...

Application of in-situ liquid cell transmission electron microscopy in corrosion studies: a critical review of challenges and achievements

Identifying corrosion initiation events in metals and alloys demands techniques that can provide temporal and spatial resolution simultaneously. Transmission electron microscopy (TEM) enables one to obtain microstructural and chemical descriptors of materials at atomic/nanoscopic level and has been used in corrosion studies of many metal...

In-situ nanoscopic observations of dealloying-driven local corrosion from surface initiation to in-depth propagation

Dealloying is involved in materials science responsible for fabrication of nanoscale structures beneficially but for corrosion degradations detrimentally. Detailed understanding related to the latter is critical for designing corrosion-resistance alloys and dedicated inhibition systems. Thus, direct nanoscopic observations of nano-structural...

Dealloying-driven local corrosion by intermetallic constituent particles and dispersoids in aerospace aluminium alloys

Nanoscopic characterization of heterogeneous intermetallic particles (IMPs) which microstructurally and compositionally evolve during local corrosion is crucial in unravelling the mechanisms and sequence of initial and local corrosion events. Herein, we study site-specific initiation events focused on microscopic constituent intermetallic...

In-situ STEM imaging of growth and phase change of individual CuAl_X precipitates in Al alloy

Age-hardening in Al alloys has been used for over a century to improve its mechanical properties. However, the lack of direct observation limits our understanding of the dynamic nature of the evolution of nanoprecipitates during age-hardening. Using in-situ (scanning) transmission electron microscopy (S/TEM) while heating an Al-Cu alloy, we...

A transferable force field for CdS-CdSe-PbS-PbSe solid systems

Heat-induced transformation of CdSe–CdS–ZnS core–multishell quantum dots by Zn diffusion into inner layers

In this work, we investigate the thermal evolution of CdSe–CdS–ZnS core–multishell quantum dots (QDs) in situ using transmission electron microscopy (TEM). Starting at a temperature of approximately 250 °C, Zn diffusion into inner layers takes place together with simultaneous evaporation of particularly Cd and S. As a result of this...

Atomic Resolution Monitoring of Cation Exchange in CdSe-PbSe Heteronanocrystals during Epitaxial Solid?Solid?Vapor Growth

Here, we show a novel solid?solid?vapor (SSV) growth mechanism whereby epitaxial growth of heterogeneous semiconductor nanowires takes place by evaporation-induced cation exchange. During heating of PbSe-CdSe nanodumbbells inside a transmission electron microscope (TEM), we observed that PbSe nanocrystals grew epitaxially at the expense of CdSe...

Characterization of NbC and (Nb, Ti)N nanoprecipitates in TRIP assisted multiphase steels

Multiphase steels utilising composite strengthening may be further strengthened via grain refinement or precipitation by the addition of microalloying elements. In this study a Nb microalloyed steel comprising martensite, bainite and retained austenite has been studied. By means of transmission electron microscopy (TEM), we have investigated the...

Method and apparatus for the formation of nanometer-scale electrodes, and such electrodes

A method for the formation of nanometer-scale electrodes, wherein strip of electrically conductive material, in particular metal, is provided with a longitudinal direction, a width direction and a thickness direction and then, with the aid of an electron beam, a groove is provided in a top surface of the strip, in the width direction of the...

Nanopipes in GaN: Photo-etching and TEM study

Photochemical (PEC) etching and transmission electron microscopy (TEM) have been used to study the defects in hetero-epitaxial GaN layers. TEM proved that PEC etching reveals not only dislocations but also nanopipes in the form of protruding, whisker-like etch features. It is shown by diffraction contrast techniques that the nanopipes are screw...

Changes in the electronic structure of cerium due to variations in close packing