Pages
- 1
- 2
- document
-
Castro-Alonso, Juan C. (author), Ayres, Paul (author), Zhang, S. (author), de Koning, Björn B. (author), Paas, Fred (author)Research on embodied cognition acknowledges that cognitive processing is tightly coupled with bodily activities and the environment. An important implication for education is that learning can be enhanced when the brain, body, and environment mutually influence each other, such as when making or observing human actions, especially those...review 2024
- document
-
Zhang, S. (author), Liang, Yaxin (author), Yang, Cai (author), Venema, Paul (author), Rietveld, L.C. (author), Heijman, Sebastiaan (author)A large decrease in permeability is often observed during the filtration of nano-sized colloids, while fouling is widely regarded as the main explanation for this phenomenon. The osmotic pressure or concentration polarization (CP) of colloids can also contribute to the flux decline. However, the contribution of CP to flux loss cannot be...journal article 2024
- document
-
Zhang, S. (author), Hanjalic, A. (author), Wang, H. (author)Nodal spreading influence is the capability of a node to activate the rest of the network when it is the seed of spreading. Combining nodal properties (centrality metrics) derived from local and global topological information respectively has been shown to better predict nodal influence than using a single metric. In this work, we investigate...journal article 2024
- document
-
Zhang, S. (author), Li, Yuhang (author), Bannenberg, L.J. (author), Liu, Ming (author), Ganapathy, S. (author), Wagemaker, M. (author)Formation cycling is a critical process aimed at improving the performance of lithium ion (Li-ion) batteries during subsequent use. Achieving highly reversible Li-metal anodes, which would boost battery energy density, is a formidable challenge. Here, formation cycling and its impact on the subsequent cycling are largely unexplored. Through...journal article 2024
- document
-
Leibbrandt, Louise (author), Zhang, S. (author), Roelvink, M.A.T. (author), Bergkamp, Stan (author), Li, Xinqi (author), Bisschop, Lieselot (author), Wingerde, Karin van (author), Wang, H. (author)This paper aims to understand to what extent the amount of drug (e.g., cocaine) trafficking per country can be explained and predicted using the global shipping network. We propose three distinct network approaches, based on topological centrality metrics, Susceptible-Infected-Susceptible spreading process and a flow optimization model of...conference paper 2023
- document
-
Zhang, S. (author), Zhao, Xunyi (author), Wang, H. (author)Progress has been made in how to suppress epidemic spreading on temporal networks via blocking all contacts of targeted nodes or node pairs. In this work, we develop contact blocking strategies that remove a fraction of contacts from a temporal (time evolving) human contact network to mitigate the spread of a Susceptible-Infected-Recovered...journal article 2022
- document
-
Liu, M. (author), Zhang, S. (author), van Eck, Ernst R.H. (author), Wang, C. (author), Ganapathy, S. (author), Wagemaker, M. (author)The development of commercial solid-state batteries has to date been hindered by the individual limitations of inorganic and organic solid electrolytes, motivating hybrid concepts. However, the room-temperature conductivity of hybrid solid electrolytes is still insufficient to support the required battery performance. A key challenge is to...journal article 2022
- document
-
Zhang, Z. (author), Zhang, S. (author), Yao, Z. (author), Tao, X. (author), Cao, X. (author), Zhang, P. (author), Kuang, P. (author), Fu, Y. (author), van Dijk, N.H. (author), van der Zwaag, S. (author)The effect of thermal aging of homogenized Fe-Au and Fe-Au-W alloys, irradiated at room temperature with hydrogen ions, was studied for an aging treatment at 300 °C for aging times up to 100 h. The aging behavior of the Fe-based alloys is compared to the results for pure Fe. The precipitation behavior of Au-rich and W-rich precipitates and...journal article 2021
- document
-
Zhang, S. (author), Zeng, X. (author), Igartua, A. (author), Rodriguez-Vidal, E. (author), van der Heide, E. (author)Surface texture is important for contact mechanical and tribological phenomena such as the contact area and friction. In this research, three different types of geometrical microstructures were designed and fabricated by pulsed laser surface texturing as semi-symmetric (grooved channel), asymmetric fractal (Hilbert curve), and symmetric...journal article 2017
- document
-
Zhang, S. (author), Zeng, X. (author), Matthews, D. T A (author), Igartua, A. (author), Rodriguez-Vidal, E. (author), Contreras Fortes, J. (author), van der Heide, E. (author)Tactile perception is a complex system, which depends on frictional interactions between skin and counter-body. The contact mechanics of tactile friction is governed by many factors such as the state and properties of skin and counter-body. In order to discover the connection between perception and tactile friction on textured stainless steel...journal article 2017
- document
-
Klaver, T.P.C. (author), Zhang, S. (author), Nordlund, K. (author)We present results of MD simulations of low energy He ion bombardment of low density fuzz in bcc elements. He ions can penetrate several micrometers into sparse fuzz, which allows for a sufficient He flux through it to grow the fuzz further. He kinetic energy falls off exponentially with penetration depth. A BCA code was used to carry out the...journal article 2017
- document
-
Shuang, Weifang (author), Zhang, S. (author), Wu, Xue (author), van Kampen, E. (author), Chu, Q. P. (author)<br/>conference paper 2017
- document
-
Zhang, S. (author), Zeng, X. (author), Matthews, D. T A (author), Igartua, A. (author), Rodriguez-Vidal, E. (author), Contreras Fortes, J. (author), Saenz de Viteri, V. (author), Pagano, F. (author), Wadman, B. (author), Wiklund, E. D. (author), van der Heide, E. (author)This review gives a concise introduction to the state-of-art techniques used for surface texturing, e.g., wet etching, plasma etching, laser surface texturing (LST), 3D printing, etc. In order to fabricate deterministic textures with the desired geometric structures and scales, the innovative texturing technologies are developed and extended....journal article 2016
- document
-
Van der Zwaag, S. (author), Zhang, S. (author), Fang, H. (author), Bruck, E. (author), Van Dijk, N.H. (author)We report the main findings of our work on the behaviour of binary Fe-Cu and Fe-Au model alloys designed to explore routes to create new creep resistant steels having an in-built ability to autonomously fill creep induced porosity at grain boundaries. The alloying elements were selected on the basis of their ability to be brought in...conference paper 2016
- document
-
Zhang, S. (author), Fang, H. (author), Gramsma, M. E. (author), Kwakernaak, C. (author), Sloof, W.G. (author), Tichelaar, F.D. (author), Brück, E.H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)We have investigated the autonomous repair of creep damage by site-selective precipitation in a binary Fe-Mo alloy (6.2 wt pct Mo) during constant-stress creep tests at temperatures of 813 K, 823 K, and 838 K (540 °C, 550 °C, and 565 °C). Scanning electron microscopy studies on the morphology of the creep-failed samples reveal irregularly...journal article 2016
- document
-
Zhang, S. (author), Kwakernaak, C. (author), Tichelaar, F.D. (author), Sloof, W.G. (author), Kuzmina, M. (author), Herbig, M. (author), Raabe, D. (author), Brück, E. (author), Van der Zwaag, S. (author), Van Dijk, N.H. (author)The autonomous repair mechanism of creep cavitation during high-temperature deformation has been investigated in Fe-Au and Fe-Au-B-N alloys. Combined electron-microscopy techniques and atom probe tomography reveal how the improved creep properties result from Au precipitation within the creep cavities, preferentially formed on grain boundaries...journal article 2015
- document
-
Zhang, S. (author)Steel components can exhibit premature and low-ductility creep fracture, when exposed to high temperatures for long times. The failure arises from the formation, growth and coalescence of ultra-fine cracks and cavities. Self healing of damage is a promising new approach to enhance the lifetime of the steel components, in particular for...doctoral thesis 2015
- document
-
Zhang, S. (author), Langelaan, G. (author), Schut, H. (author), Brück, E. (author), Van der Zwaag, S. (author), Van Dijk, N.H. (author)Steels are among the most widely used construction materials as their mechanical properties can be tuned over a very wide range of desired combinations of strength formability and other properties. However, when exposed for long times to high temperatures steel components can exhibit premature and low-ductility creep fracture, which arises from...conference paper 2013
- document
-
Zhang, S. (author), Langelaan, G. (author), Schut, H. (author), Brück, E. (author), Van der Zwaag, S. (author), Van Dijk, N.H. (author)Steels are among the most widely used construction materials as their mechanical properties can be tuned over a very wide range of desired combinations of strength formability and other properties. However, when exposed for long times to high temperatures steel components can exhibit premature and low-ductility creep fracture, which arises from...conference paper 2013
- document
-
Langelaan, G. (author), Zhang, S. (author), Brück, E. (author), Van der Zwaag, S. (author), Van Dijk, N.H. (author)Abstract only.conference paper 2013
Pages
- 1
- 2