- document
-
Shen, Chunguang (author), Wang, Chenchong (author), Huang, Minghao (author), Xu, Ning (author), van der Zwaag, S. (author), Xu, W. (author)We present an electron backscattered diffraction (EBSD)-trained deep learning (DL) method integrating traditional material characterization informatics and artificial intelligence for a more accurate classification and quantification of complex microstructures using only regular scanning electron microscope (SEM) images. In this method, EBSD...journal article 2021
- document
-
Montano, V. (author), Vogel, Wouter (author), Smits, Angela (author), van der Zwaag, S. (author), Garcia, Santiago J. (author)The effects of the soft block fraction and H-bond state in thermoplastic polyurethanes on autonomous entropy-driven scratch closure and barrier restoration are studied. To this aim, comparable polyurethanes with different segmentation states are applied as organic coatings on plain carbon steel plates, scratched under very well-controlled...journal article 2021
- document
-
Siroky, Georg (author), Kraker, Elke (author), Rosc, Jördis (author), Kieslinger, Dietmar (author), Brunner, Roland (author), van der Zwaag, S. (author), Kozeschnik, Ernst (author), Ecker, Werner (author)This work provides an analysis of X-ray micro computed tomography data of Sn-xBi solders with x = 20, 30, 35, 47, 58 wt.% Bi. The eutectic thickness, fraction of eutectic and primary phase are analyzed. Furthermore, the 3D data is evaluated by means of morphology parameters, such as, shape complexity, flatness, elongation and mean intercept...journal article 2021
- document
-
van der Jagt, R. (author), Vasileiadis, A. (author), Veldhuizen, H.V. (author), Ganapathy, S. (author), Habisreutinger, N.C.P. (author), van der Veen, M.A. (author), Wang, C. (author), Wagemaker, M. (author), van der Zwaag, S. (author), Nagai, A. (author)Covalent organic frameworks (COFs) are an emerging material family having several potential applications. Their porous framework and redox-active centers enable gas/ion adsorption, allowing them to function as safe, cheap, and tunable electrode materials in next-generation batteries, as well as CO2 adsorption materials for carbon-capture...journal article 2021
- document
-
Krishnasamy, J. (author), Ponnusami, Sathiskumar A. (author), Turteltaub, S.R. (author), van der Zwaag, S. (author)The thermal cyclic behavior of self-healing thermal barrier coatings (SH-TBC) is analyzed numerically to develop a lifetime prediction model. Representative microstructures are studied adopting a unit cell based multiscale modeling approach along with a simplified evolution model for the thermally-grown oxide layer (TGO) to study the...journal article 2021
- document
-
Li, Cong (author), Ding, Zhili (author), van der Zwaag, S. (author)Isothermal hot compression tests of two promising new titanium alloys (Ti-10 V-1Fe-3Al and Ti-10 V-2Cr-3Al) are performed using a TA DIL805D deformation dilatometer at temperatures in and above the two-phase α + β region (730–880 °C) at strain rates ranging from 10<sup>−3</sup> to 10<sup>−1</sup> s<sup>−1</sup>. Results show that the flow...journal article 2021
- document
-
Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)An experimental study on broadband noise scattered by permeable trailing edges with different pore arrangements is performed. A NACA 0018 airfoil with chord c = 0.2 m is investigated at chord-based Reynolds numbers ranging from 1.4 × 10<sup>5</sup> to 3.8 × 10<sup>5</sup> and angles of attack of 0.2 and 5.4 degrees. Noise emission from five...journal article 2020
- document
-
Montano, V. (author), Senardi, M. (author), van der Zwaag, S. (author), Garcia, Santiago J. (author)The use of rheology and terminal flow relaxation times to predict healing behavior at long healing times is by now quite well accepted. In this work we go one step further and explore the use of macro-rheology (in particular the stored work of deformation) to predict the early stage interfacial healing properties (fracture resistance) of a...journal article 2020
- document
-
Fu, Y. (author), Kwakernaak, C. (author), Sloof, W.G. (author), Tichelaar, F.D. (author), Brück, E.H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)Autonomous healing of creep-induced grain boundary cavities by Au-rich and W-rich precipitates was studied in a Fe-3Au-4W (wt pct) alloy at a fixed temperature of 823 K (550 °C) with different applied stresses. The ternary alloy, with two supersaturated healing solutes, serves as a model system to study the interplay between two separate...journal article 2020
- document
-
Nutter, J. (author), Rainforth, W. M. (author), van der Zwaag, S. (author)The current study reports the detailed analysis of an observation of the local pinning of a slowly moving austenite-ferrite interface by a single nanosized oxidic particle. The observations were made during an in situ cyclic partial phase transformation experiment on a Fe-0.1C-1.0Mn alloy close to the inversion stage at which the interface...journal article 2020
- document
-
Mkhoyan, T. (author), Stuber, V.L. (author), Nazeer, N. (author), De Breuker, R. (author), Groves, R.M. (author), Groen, W.A. (author), van der Zwaag, S. (author), Sodja, J. (author), Wang, X. (author)PowerPoint presentationother 2020
- document
-
Yu, H. (author), Xu, W. (author), van der Zwaag, S. (author)The high performance of Ni single crystal superalloys during high temperature low stress creep service, is intrinsically determined by the combined effects of microstructural evolution and the dislocation behaviour. In the field of the evolution of dislocation network, two main recovery mechanism based on dislocation migration dominate the...journal article 2020
- document
-
Fu, Y. (author), Kwakernaak, C. (author), Brouwer, J.C. (author), Sloof, W.G. (author), Brück, E.H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)Abstract: The precipitation of supersaturated solutes at free surfaces in ternary Fe–3Au–4W and binary Fe–3Au and Fe–4W alloys (composition in weight percentage) for different ageing times was investigated at a temperature of 700 °C. The time evolution of the surface precipitation is compared among the three alloys to investigate the...journal article 2020
- document
-
Ding, Ran (author), Liu, Geng (author), Wan, Xinhao (author), Ponge, Dirk (author), Raabe, Dierk (author), Godfrey, Andy (author), Furuhara, Tadashi (author), Yang, Zhigang (author), van der Zwaag, S. (author)For decades, grain boundary engineering has proven to be one of the most effective approaches for tailoring the mechanical properties of metallic materials, although there are limits to the fineness and types of microstructures achievable, due to the rapid increase in grain size once being exposed to thermal loads (low thermal stability of...journal article 2020
- document
-
van Kempen, S. E. (author), Khanbareh, H. (author), Groen, W.A. (author), Hol, J.M.A.M. (author), van der Zwaag, S. (author)A novel method based on the Virtual Particle Mori–Tanaka (VPMT) is developed to predict the effective electro-elastic properties, d<sub>33</sub> and g33, of structured piezoelectric particulate composites with improved accuracy by means of a single parameter related to the spatial distribution of imperfectly aligned rod-like PZT particles....journal article 2020
- document
-
Deutz, D.B. (author), van der Zwaag, S. (author), Groen, W.A. (author)As demand rises for flexible electronics, traditionally prepared sintered ceramic sensors must be transformed into fully new sensor materials that can bend and flex in use and integration. Negative temperature coefficient of resistance (NTC) ceramic thermistors are preferred temperature sensors for their high accuracy and excellent stability,...journal article 2020
- document
-
Zhang, Shasha (author), van Dijk, N.H. (author), van der Zwaag, S. (author)Self-healing metals possess the capability to autonomously repair structural damage during service. While self-healing concepts remain challenging to be realized in metals and metallic systems due to the small atomic volume of the mobile atoms, the slow diffusion unless at high temperatures and the strong isotropic metallic bonds, the...review 2020
- document
-
Hornat, Chris C. (author), Nijemeisland, M. (author), Senardi, M. (author), Yang, Ying (author), Pattyn, Christian (author), van der Zwaag, S. (author), Urban, Marek W. (author)Shape memory polymers (SMPs) are dynamic materials able to recover previously defined shapes when activated by external stimuli. The most common stimulus is thermal energy applied near thermal transitions in polymers, such as glass transition (T<sub>g</sub>) and melting (T<sub>m</sub>) temperatures. The magnitude of the geometrical changes as...journal article 2020
- document
-
Zhang, Shasha (author), Cizek, Jakub (author), Yao, Zhengjun (author), Oleksandr, Moliar (author), Kong, Xiangshan (author), Liu, Changsong (author), van Dijk, N.H. (author), van der Zwaag, S. (author)Self healing of early stage radiation damage by site selective solute segregation is a promising approach to extend the lifetime of nuclear reactor components. In the present study, the creation and autonomous healing of irradiation-induced damage is investigated in pure Fe and high purity Fe–Au and Fe–Cu model alloys. To create radiation...journal article 2020
- document
-
Zhang, Shasha (author), Yao, Zhengjun (author), Zhang, Zhaokuan (author), Oleksandr, Moliar (author), Chen, Feida (author), Cao, Xingzhong (author), Zhang, Peng (author), van Dijk, N.H. (author), van der Zwaag, S. (author)High temperature radiation damage in binary bcc Fe alloys containing 1 atomic % Au or Cu due to Fe ion irradiation at 550 °C to a peak dose of 2.8 and 8.3 dpa is studied. The precipitation behavior of gold and copper and its correlation to the irradiation-induced defects is studied by transmission electron microscopy and variable energy...journal article 2020