Susceptibility Study of TES Micro‑calorimeters for X‑ray Spectroscopy Under FDM Readout

We present a characterization of the sensitivity of TES X-ray micro-calorimeters to environmental conditions under frequency-domain multiplexing (FDM) readout. In the FDM scheme, each TES in a readout chain is in series with a LC band-pass filter and AC biased with an independent carrier at MHz range. Using TES arrays, cold readout circuitry and...

Mechanical performance characterization of lignin-modified asphalt mixture

Lignin, as a bio-based waste, has been utilized in the asphalt industry due to various advantages. This study aimed to investigate the effects of two lignin products (lignin powder and lignin fiber) on the mechanical properties of asphalt mixtures. The raveling, rutting, thermal and fatigue cracking resistance, and moisture susceptibility of...

Extension of the Hymostruc3D model for simulation of hydration and microstructure development of blended cements

The HYMOSTRUC3D model has been used successfully to predict hydration and microstructure development of pure Portland cement paste. In recent years, a number of numerical models were proposed for optimizing the use of supplementary cementitious materials. Also HYMOSTRUC3D was extended for simulating the hydration and microstructure development...

Investigation on hot cracking during laser welding by means of experimental and numerical methods

Hot cracking during laser welding of Transformation Induce Plasticity (TRIP) steel at the edges of steel flanges can be a problem. In this study, modified hot cracking tests were performed by welding on a single-side clamped specimen at various distances from the free edge, while the heat input and external constraints remained constant. In situ...