A review of small heat pipes for electronics

Heat pipes (HPs) have received considerable attention in recent decades, especially in the field of cooling electronics, which requires the removal of added heat from an area of limited volume to the environment. Small HPs are widely used in electronic applications, which are normally limited by the compact structure and dimensions of the...

Experimental study on pore connectivity and its influence on chloride transport in saturated cementitious system

The purpose of this paper is to investigate the pore connectivity and its influence on chloride transport property in cementitious materials under saturated condition. Mercury intrusion porosimetry experiment was carried out on a variety of hydrated cement pastes curing up to one year. By repeating pressurization-depressurization cycles, pore...

Development of interior relative humidity due to self-desiccation in blended cementitious system

In engineering practise, interior relative humidity (RH) of concrete significantly affects the transport properties and thus the service life of concrete structures. In this paper, the development of RH due to self-desiccation in blended cement pastes was studied from 1 day to 1.5 years. The pore structure and non-evaporable water content at...

Thermal inductance in GaN devices

Using the analogue of the electric inductance, we reveal the properties of the thermal inductance in GaN-based light-emitting diode devices by testing their transient thermal behaviors. We find that the devices exhibit a transient thermal response under step-down or step-up currents and observe notable inductive phenomena of the temperature...

Chloride transport in partially saturated mortar made of blended cement

Due to environmental (low CO2 emission) and economic benefit, supplementary cementitious materials (SCMs) have been widely used in reinforced concrete structures. However, the question from engineering practice is to which extend these blended mixtures do meet the future durability criteria. Chloride ingression is nowadays considered as the main...

Chloride diffusivity in partially saturated cement-based materials assessed by resistivity measurements

Concrete is seldom saturated due to its self-desiccation. Even the submerged concrete structures may remain unsaturated for quite a long time. It has been reported the saturation level of pore solution has significant effect on species penetration. However, very little work was proposed regarding the transport properties and serviceability of...

Pore structure of blended cement paste by means of pressurization¿depressurization cycling mercury intrusion porosimetry

Concrete containing supplementary cementitious materials (SCMs) has different durability properties from that containing pure Portland cement. The durability of concrete is always associated with the properties of microstructure, especially pore structure. Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry (PDC-MIP) was...

Effect of Limestone Powder on Microstructure of Ternary Cementitious System

The pressure to reach sustainability favours the development of ternary composite cement. The synergistic effect on mechanical behaviour at 28 days between limestone powder (LP) and pozzolanic additives, i.e. fly ash (FA) and blast furnace slag (BFS), has been documented. In order to better understand the synergistic effect, this article...

Dehydration kinetics of Portland cement paste at high temperature

Portland cement paste is a multiphase compound mainly consisting of calcium-silicate-hydrate (CSH) gel, calcium hydroxide (CH) crystal, and unhydrated cement core. When cement paste is exposed to high temperature, the dehydration of cement paste leads to not only the decline in strength, but also the increased pore pressure in the paste. In this...

Single-Mask Fabrication of Temperature Triggered MEMS Switch for Cooling Control in SSL System

A micro-electro-mechanical-system (MEMS) based, temperature triggered, switch is developed as a cost-effective solution for smart cooling control of solid-state-lighting systems. The switch (1.0x0.4 mm2) is embedded in a silicon substrate and fabricated with a single-mask 3D micro-machining process. The device switches on at a designed...

Microstructure Analysis of Heated Portland Cement Paste

When a concrete structure is exposed to high temperature, the mechanical damage and chemical transformation take place simultaneously, which will change the microstructure of material. On the other hand, the mechanical properties and transport properties depend on the development of microstructure of cement paste. In order to study the...